OMNIREL OMR7915SR, OMR7915ST, OMR7915NH, OMR7912ST, OMR7912SR Datasheet
...
300K Rad T olerant Three T erminal,
Negative Fixed Voltage Regulators
In Hermetic Packages
300 kRAD RADIATION TOLERANT 1.5 AMP
NEGATIVE FIXED VOLTAGE REGULATORS
OMR7905NH
OMR7912NH
OMR7915NH
OMR7905NM
OMR7912NM
OMR7915NM
OMR7905ST
OMR7912ST
OMR7915ST
OMR7905SR
OMR7912SR
OMR7915SR
Please see mechanical
outlines herein
0 04 R1
Supersedes 9 12 R0
FEATURES
• Isolated & Non-Isolated Hermetic Packages
• Output Voltages: -5V, -12V, -15V (Other Voltages Available)
• Output Voltages Set Internally To ±1% or ±2%
• Built-In Thermal Overload Protection
• Short Circuit Current Limiting
• Radiation Tolerant up to 450 K Rad (Si)
• Available Hi-Rel Screened, Class B and Class S, MIL-STD-883
DESCRIPTION
These three terminal negative regulators are supplied in a high density hermetically sealed
metal package and are available hi-rel screened. All protective features are designed into the
circuit, including thermal shutdown, current limiting and safe-area control. With heat sinking,
they can deliver over 1.5 amps of output current. These units feature internally trimmed output
voltages to ±1% or 2% of nominal voltage. Standard voltages are -5V, -12V, and
-15V. However, other voltages are available up to -24 volts. These devices are ideally suited
for Space applications where small size, high reliability, and radiation tolerance is required.
The high level of Radiation Tolerance of these devices makes them a desirable choice for LEO
and many MEO and GEO communication satellites. Radiation testing is perf ormed on a single
wafer by wafer basis. Random die samples per wafer are selected, packaged and radiation
tested to qualify each individual semiconductor wafer-by-wafer.
ABSOLUTE MAXIMUM RATINGS @ 25°C
Input V oltage .........................................................................-35 V
Operating Junction Temperature Range .................................. - 55°C to + 150°C
Storage Temperature Range............................................. - 65°C to + 150°C
Power Dissipation: TO-205 ...........................................................1.1 W
TO-257/SMD/ D2Pac.................................................................20 W
Lead Temperature (Soldering 10 seconds) ...........................................300°C
Surface Mount Package Soldering Temperature ......................................250°C
Thermal Resistance, Junction to Case:
TO-205 .......................................................................17°C/W
TO-257(Isolated), D2Pac (Isolated) ..........................................4.2°C/W
SMD-1 .......................................................................3.5°C/W
Thermal Resistance, (Junction Ambient):
TO-205 .......................................................................90°C/W
TO-257(Isolated), D2Pac (Isolated) SMD-1...................................42°C/W
Maximum Output Current: TO-205....................................................0.5 A
Case-All Others..................................................................3.3A
Radiation Tolerant - T otal Dose ..............................................300 K Rad (Si)
ELECTRICAL CHARACTERISTICS -5 V olt V
IN
= -10V, Io= 500mA, -55°C ≤ TA≤ 125°C (unless otherwise specified)
Parameter Symbol Test Conditions Min. Max. Unit
Output Voltage V
OUT
TA= 25°C -4.95 -5.05 V
V
IN
= -7.5V to -20V • -4.85 -5.15 V
Line Regulation V
RLINE
VIN= -7.5V to -20V 12 mV
(Note 1)
• 25 mV
V
IN
= -8.0V to -12V 5 mV
• 12 mV
Load Regulation V
RLOAD
IO = 5mA to 1.5 Amp 20 mV
(Note 1)
• 25 mV
I
O
= 250mA to 750 mA 15 mV
• 30 mV
Standby Current Drain I
SCD
2.5 mA
•
3.0 mA
Standby Current Drain ∆I
SCD
VIN= -7.0V to -20V
• 0.4 mA
Change With Line (Line)
Standby Current Drain ∆I
SCD
IO= 5mA to 1000mA • 0.4 mA
Change With Load (Load)
Dropout Voltage V
DO
∆V
OUT
= 100mV, I
O
= 1.0A • 2.5 V
Peak Output Current I
O (pk)
TA= 25°C 1.5 3.3 A
Short Circuit Current I
DS
VIN= -35V 1.2 A
(Note 2)
• 2.8 A
Ripple Rejection ∆V
IN
f =120 Hz, ∆VIN= -10V 63 dB
∆V
OUT
(Note 3) • 60 dB
Output Noise Voltage N
O
TA= 25°C, f =10 Hz to 100KHz 40 µV/V
(Note 3) RMS
Long Term Stability ∆V
OUT
TA= 25°C, t = 1000 hrs. 75 mV
(Note 3) ∆t
ELECTRICAL CHARACTERISTICS -12 Volt V
IN
= -19V, Io= 500mA, -55°C ≤ TA≤ 125°C (unless otherwise specified)
Parameter Symbol Test Conditions Min. Max. Unit
Output Voltage V
OUT
TA= 25°C -11.88 -12.12 V
V
IN
= -14.5V to -27V • -11.64 -12.36 V
Line Regulation V
RLINE
VIN= -14.5V to -27V 20 mV
(Note 1)
• 50 mV
V
IN
= -16V to -22V 10 mV
• 30 mV
Load Regulation V
RLOAD
IO = 5mA to 1.5 Amp 32 mV
(Note 1)
• 60 mV
I
O
= 250mA to 750 mA 16 mV
• 30 mV
Standby Current Drain I
SCD
3.5 mA
• 4.0 mA
Standby Current Drain ∆I
SCD
VIN= -14.5V to -27V • 0.8 mA
Change With Line (Line)
Standby Current Drain ∆I
SCD
IO= 5mA to 1000mA • 0.5 mA
Change With Load (Load)
Dropout Voltage V
DO
∆V
OUT
= 100mV, I
O
= 1.0A • 1.8 V
Peak Output Current I
O (pk)
TA= 25°C, IO= 5mA to 1A 1.5 3.3 A
Short Circuit Current I
DS
V
IN
= -35V 1.2 A
(Note 2)
• 2.8 A
Ripple Rejection ∆V
IN
f =120 Hz, ∆VIN= -10V 56 dB
∆V
OUT
(Note 3) • 53 dB
Output Noise Voltage N
O
TA= 25°C, f =10 Hz to 100KHz 40 µV/V
(Note 3) RMS
Long Term Stability ∆V
OUT
TA= 25°C, t = 1000 hrs. 120 mV
(Note 3) ∆t
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to V
IN
= -35V.
3. If not tested, shall be guaranteed to the specified limits.
4. The • denotes the specifications which apply over the full operating temperature range.
5. Refer to curves for typical characteristics versus Total Dose Radiation Levels.
OMR7905NH
OMR7912NH
OMR7915NH
OMR7905NM
OMR7912NM
OMR7915NM
OMR7905ST
OMR7912ST
OMR7915ST
OMR7905SR
OMR7912SR
OMR7915SR
RADIA TION TEST PROGRAM
The following chart is a summary of the test data collected on Radiation Tolerant
OMR7905/12/15 at various doses. The chart depicts the Total Radiation Dose that each device
was exposed to on a step stress irradiation basis prior to failure. Failure is defined as any
electrical test that does not meet the limits of the device per the published data sheet
specifications after radiation testing.
Omnirel P/N 5K 10K 20K 30K 50K 60K 70K 80K 100K 150K 200 250 300 350 400 450 KRAD
OMR7905/12/15
Test Points XX XX X X
ELECTRICAL CHARACTERISTICS -15 Volt V
IN
= -23V, Io= 500mA, -55°C ≤ TA≤ 125°C (unless otherwise specified)
Parameter Symbol Test Conditions Min. Max. Unit
Output Voltage V
OUT
TA= 25°C -14.85 -15.15 V
V
IN
= -17.5V to -30V • -14.55 -15.45 V
Line Regulation V
RLINE
VIN= -17.5V to -30V 25 mV
(Note 1)
• 50 mV
V
IN
= -20V to -26V 15 mV
• 25 mV
Load Regulation V
RLOAD
IO = 5mA to 1.5 Amp 35 mV
(Note 1)
•
75 mV
I
O
= 250mA to 750 mA 21 mV
• 45 mV
Standby Current Drain I
SCD
6.0 mA
• 6.5 mA
Standby Current Drain ∆I
SCD
VIN= -17.5V to -30V • 0.8 mA
Change With Line (Line)
Standby Current Drain ∆I
SCD
IO= 5mA to 1000mA
• 0.5 mA
Change With Load (Load)
Dropout Voltage V
DO
∆V
OUT
= 100mV, I
O
= 1.0A • 2.5 V
Peak Output Current I
O (pk)
TA= 25°C 1.5 3.3 A
Short Circuit Current I
DS
VIN= -35V 1.2 A
(Note 2)
• 2.8 A
Ripple Rejection ∆V
IN
f =120 Hz, ∆VIN= -10V 53 dB
∆V
OUT
(Note 3)
• 50 dB
Output Noise Voltage N
O
TA= 25°C, f =10 Hz to 100KHz 40 µV/V
(Note 3) RMS
Long Term Stability ∆V
OUT
TA= 25°C, t = 1000 hrs. 150 mV
(Note 3) ∆t
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to V
IN
= -35V.
3. If not tested, shall be guaranteed to the specified limits.
4. The • denotes the specifications which apply over the full operating temperature range.
5. Refer to curves for typical characteristics versus Total Dose Radiation Levels.
OMR7905NH
OMR7912NH
OMR7915NH
OMR7905NM
OMR7912NM
OMR7915NM
OMR7905ST
OMR7912ST
OMR7915ST
OMR7905SR
OMR7912SR
OMR7915SR
Loading...