Wireless sensor system
CHART
http://192.168.1.200
zSeries
Save Current Graph
U Temperature
U Humidity
U Barometric
Pressure
U Alarms by Email
and Text Message
U Web Server
U No Special
Software
Required
The new OMEGA
wireless sensor system
provides Web-based monitoring
of temperature, humidity,
and barometric pressure in
critical HVAC and refrigeration
applications.
The compact wireless “End
Devices” mount discretely
on the wall in clean rooms,
laboratories, museums,
computer server rooms,
warehouses, and any remote
facility. The wireless End
Devices are powered by two
“AA” 1.5V alkaline batteries
(included).
The End Devices transmit
up to 91 m (300') (without
obstructions or interference) to a
“Coordinator” connected directly
to an Ethernet network and the
Internet. The wireless system
complies with IEEE 802.15.4
operating at 2.4 GHz.
The OMEGA zSeries system
let’s you monitor and record
temperature, relative humidity,
and barometric pressure over an
Ethernet network or the Internet
without any special software-just
your Web Browser.
®
zSeries
P0 Primary
P1 Primary
P2 LAB 100
P3 Primary
P4 Primary
P5 Primary
P6 Primary
P7 Primary
50
C/Div
0
LAB 100 Temp
5
30 1010
OMEGA offers a selection of
Devices for a variety of
End
applications.
Each End Device
supports 1 or 2 sensors. End
Devices are available with
built-in sensors, with external
sensor probes, and with
both built-in and external
sensors. The external sensors
are designed for harsh
environments such as outdoor
weather, in HVAC ducts, in
freezers and refrigerators.
For example, you can select
one End Device that has one
internal and one external sensor
to monitor temperature and
humidity both inside and outside
a climate-controlled facility.
Each zSeries Coordinator can
directly support up to 32 end
devices. The Coordinators
include AC adaptors to operate
on any voltage worldwide from
100 to 240 Vac and 50 to 60 Hz.
The Coordinator connects
directly to an Ethernet Network
or the Internet. Unlike an RS232
or USB device, it does not
require a host computer.
zSeries
Group A
C hPa
LAB 100 RH LAB100 Pres
(5 Seconds/Div)
1 Minute
1 Minute
1 Day
1 Week
1 Month
1 Year
Main Menu
Tue Jun 5 10:19:10 PDT 2007Tue Jun 5 10:18:10 PDT 2007
zED-T, includes two
“AA” 1.5V alkaline batteries,
shown close to actual size.
1200
100%
10
90
%/Div
hPa/Div
0%
300
zCDR shown smaller
than actual size.
S0 Secondary
S1 Secondary
S2 LAB 100
S3 Secondary
S4 Secondary
S5 Secondary
S6 Secondary
S7 Secondary
C-39
The zSeries Coordinator is an independent node on
CC
the network sending and receiving data in standard
TCP/IP packets. It is easily configured from a Web
Browser and can be password protected. From within an
Ethernet LAN or over the Internet, the user simply types
the IP address (such as 192.168.1.200) or an easy to
remember name (such as “Warehouse 5” or “Chicago
Lab”) and the Coordinator serves a Web Page with the
current readings.
The device can trigger an alarm if variables go above
or below a set point that you determine. Your alarm
can be sent by email to a single user or to a group
distribution list, including text messages to Internet
enabled cell phones and PDA’s. The OMEGA “Mail
Notifier” software is a free and easy program for this
application.
The OMEGA zSeries wireless sensor system is easy to
install, simple to operate, and features OMEGA’s awardwinning i
®
Server technology with an Embedded Web
Server that requires no special software.
The OMEGA zSeries system serves Active Web Pages
to display real time readings and charts of temperature,
humidity, and barometric pressure. You can also log
data in standard data formats for use in a spreadsheet or
data acquisition program such as Excel or Visual Basic.
OMEGA offers a free and easy to use program for
logging data to Excel.
CHART
http://192.168.1.200
zSeries
Save Current Graph
P0 Primary
P1 Primary
P2 LAB 100
P3 Primary
P4 Primary
P5 Primary
P6 Primary
P7 Primary
50
0
C/Div
5
LAB 100 Temp
30 1010
Group A
C hPa
LAB 100 RH LAB100 Pres
(5 Seconds/Div)
1 Minute
1 Minute
1 Day
1 Week
1 Month
1 Year
Main Menu
Tue Jun 5 10:19:10 PDT 2007Tue Jun 5 10:18:10 PDT 2007
1200
hPa/Div
300
100%
10
90
%/Div
0%
S0 Secondary
S1 Secondary
S2 LAB 100
S3 Secondary
S4 Secondary
S5 Secondary
S6 Secondary
S7 Secondary
The virtual chart viewed on the web page is a JAVA™
Applet that records a chart over the LAN or Internet in
real time. With the OMEGA zSeries system there is no
need to invest time and money learning a proprietary
software program to log or chart the data.
Chart scales are fully adjustable on the fly. For example,
the chart can display one minute, one hour, one day, one
week, one month or one year. Temperature and humidity
can be charted across the full span (-40 to 125°C, and
0 to 100% RH) or within any narrow range such as
(20 to 30°C).
C
READINGS-
http://192.168.1.200
Name ID Sequence
ABCDEFGH 18
LAB 100 22
zSeries
Group A
1010.7 39.326.426.8
C --
--27.7
Data Logging: INACTIVE
secondsUpdate 1
Main Menu
mbar
%
OMEGA offers an OPC Server software that makes it
easy to integrate the zSeries wireless sensor system
with many popular Data Acquisition and Automation
programs offered by Omega, Wonderware, iConics,
Intellution, Rockwell Automation, and National
Instruments, among others.
C-40
SPECIFICATIONS
SENSOR SPECIFICATIONS (ZED)
Relative Humidity
Accuracy/Range zED-BTH, zED-TH, -THP:
±2% for 10 to 90%; ±3% for 0 to 10% and 90 to 100%
Hysteresis: ±1% RH
Non-linearity: ±3%
Repeatability: ±0.1%
Resolution: 0.1%
Temperature
Accuracy/Range*
zED-T (Internal Sensor):
±0.5°C for 10 to 55°C (±0.9°F for 50 to 131°F)
±1°C for -18 to 10°C (±1.8°F for -0.4 to 50°F)
-TP1, -TP2 (External Sensor):
±0.5°C for 10 to 85°C (±0.9°F for 50 to 185°F)
±1°C for -40 to 10°C and 85 to 125°C (±1.8°F for
-40 to 50°F and 185 to 257°F)
Accuracy/Range*
zED-BTH, zED-TH (Internal Sensor):
±0.5°C for 0 to 45°C (±0.9°F for 32 to 113°F)
±1°C for -18 to 0°C and 45 to 55°C (±1.8°F for
-0.4 to 32°F and 113 to 131°F)
-THP (External Sensor):
±0.5°C for 5 to 45°C (±0.9°F for 41 to 113°F) up to
±1°C for -40 to 5°C and 45 to 124°C (up to ±2.7°F
for -40 to 41°F and 113 to 255°F)
Accuracy/Range*
zED-BT (Internal Sensor):
±0.8°C @ 20°C (±1.5°F @ 68°F)
±2°C for -18 to 55°C (±3.6°F for -0.4 to 131°F)
-BTP (External Sensor):
±0.8°C @ 20°C (±1.5°F @ 68°F)
±2°C for -40 to 85°C (±3.6°F for -40 to 185°F)
* Note: extended temperature ranges are for external probes
only, the End Device’s operating temperature
is -18 to 55°C (-0.4 to 131°F).
Repeatability: ±0.1°C for zED-BTH, zED-TH, -THP
Resolution: 0.1°C
External temperature/
humidity or barometric
pressure/temperature probe
included with zED-TH-THP.
External temperature
lug mount probe,
included with
zED-T-TP2.
External
temperature
stick probe,
included with
zED-T-TP1.
Safety qualified
universal AC power
adaptor included with
zCDR coordinator.
Barometric Pressure
Accuracy/Range zED-BTH, zED-BT, -BTP:
±2 mbar for 10 mbar to 1100 mbar (1 KPa to 110 KPa)
Resolution: 0.1 mbar
External Probe Specifications (zED)
Industrial Probe: 316 SS housing, 137 x Ø 16 mm
(5 x Ø 0.63") for zED-xx-BTP, zED-xx-THP
Stick Probe: ABS tubing, 152.4 x Ø 6.35 mm
(6 x Ø 0.25") for zED-xx-TP1
Lug Mounted Probe: Copper tubing, 53.4 x Ø 7.92 mm
(2.1 x Ø 0.312"); mounting hole Ø 4.72 mm (Ø 0.186") for
zED-xx-TP2
Standard Cable: 3 m (10') long x Ø 5.72 mm (0.225");
-40 to 125°C (-40 to 257°F) for -TPI, -TP2, -THP;
-55 to 105°C (-67 to 221°F) for -BTP
Optional MIL Spec Cable (-ET): Ø 2.62 mm (0.103");
-80 to 200°C (-112 to 392°F)
Interface Specifications (zCDR)
Ethernet: 10Base-T (RJ45)
Supported Protocols: TCP/IP, ARP, ICMP, DHCP,
DNS, HTTP, and Telnet
LED Indicators: Network Activity, Network Link, Diagnostics,
Receive and Power
Management: Device configuration and monitoring through
embedded WEB server
Embedded WEB Server: Serves WEB pages (JAVA™
Applets) containing real-time data and live updated charts
within definable time intervals
Power (zCDR)
Power Input: 9 to 12 Vdc
Consumption: 2.5 W max
Safety Qualified AC Power Adaptor: Included
Nominal Output: 9 Vdc @ 0.5 A
Input: 100 to 240 Vac, 50/60 Hz
Power Adaptor Operating Temperature: 0 to 40°C (32 to 104°F)
Power (zED)
Alkaline Battery: Two 1.5 Vdc (included)
Lifetime: Estimate of 2 years
with frequency of 1 reading per 2 minutes
Wireless Communication
Protocol: IEEE 802.15.4
Frequency: 2.4 GHz (2400 to 2483.5 MHz), DSSS, 16 channels
Network Topology: Star Topology
Range: Up to 91 m (300') without obstructions or interference
Environment
Operating Temperature: -18 to 55°C (-0.4 to 131°F) for zED;
0 to 70°C (32 to 158°F) for zCDR, 90% RH non-condensing
Storage Temperature: -40 to 125°C (-40 to 257°F)
Packaging: See mechanical section
General
Agency Approval: FCC Part 15C; CE EMC 2004/108/EC,
LVD 2006/95/EC, RTT&E 1999/5/EC
Software: iConnect (configuration software for the Ethernet
interface), iLog (Excel-based software for automatic data
logging), and Mail Notifier (email alarm notification software)
C-41
23.6
(0.93)
61.6 (2.42)
102.2 (4.02)
90.3 (3.56) 103.2 (4.06)
DIAGNOSTICS
NETWORK LINK
ACTIVITY
COORDINATOR
TRANSMIT
POWER
zED - End Device
zCDR - Coordinator
Material: Metal Case
with Wall Mount Bracket
zCDR -
Coordinator
Material: Metal Case
with Wall Mount Bracket
66.0 [2.60]
93.1
[3.67]
Ethernet
108
[4.3]
Material: Valox® Plastic Case
with Wall Mount
Optional
External
Sensor
zCDR -
Coordinator
Material: Metal
Case with Wall
Mount Bracket
108
[4.3]
107.7 (4.24)
Dimensions: mm (inch)
zCDR -
Coordinator
Material: Plastic Case
with Wall Mount Bracket
93.1
[3.67]
90.3 (3.56)
66.0 [2.60]
Ethernet
27.4
[1.08]
23.8
(0.94)
64.5 (2.54)
91.8 (3.61)
23.6
(0.93)
61.6 (2.42)
To Order Visit omega.com/zseries for Pricing and Details
Model No. Description
zCDR Coordinator, which can support up to 32 end devices
zED-T End device unit with internal temperature sensor
zED-T-TP1 End device unit with internal temperature sensor and external temperature sensor with stick probe
zED-T-TP2
zED-TH End device unit with internal temperature and humidity sensor
zED-TH-THP End device unit with internal and external temperature and humidity sensor
zED-THP End device unit with external temperature and humidity sensor
zED-BT End device unit with internal barometric pressure and temperature sensor
zED-BTH End device unit with internal barometric pressure, temperature and humidity sensor
zED-B-THP End device unit with internal barometric pressure sensor, external temperature
zED-BT-BTP End device unit with internal barometric pressure and temperature sensor and external
Replacement Probes
zTHP External industrial probe with temperature and humidity sensor, 3 m (10') cable
zTP1 External stick probe with temperature sensor, 3 m (10') cable
zTP2 External lug mount probe with temperature sensor, 3 m (10') cable
zBTP External industrial probe with barometric pressure, temperature sensor, 3 m (10') cable
Calibration
CAL-3-HU NIST-traceable calibration certificate; 3 humidity points: 25%, 50%, 75%,
CAL-3-HU-P-T NIST-traceable calibration certificate; 3 humidity, barometric pressure, and temperature points
CAL-3-P NIST-traceable calibration certificate; 3 barometric pressure points, temperature 25°C (for new units)
CAL-3-T
CT485B-CAL-KIT Calibration kit, 33% and 75% RH standards
Other sensor combinations available, contact our Sales Department for more information.
Comes complete with software and operator’s manual.
Ordering Examples: Two zED-T-TP2 end units with an internal temperature sensor and an external temperature sensor in a lug mounting
probe housing with 6 m (20') cable and zCDR coordinator.
For MIL Spec cable add suffix “-ET”, for additional cost for each foot of cable, zED-T-TP1-ET, or for different lengths, such as 5' cable,
zED-T-TP1-ET5.
Not available for “-BTP” probes.
End device unit with internal temperature sensor and external temperature sensor with lug mount probe
and humidity sensor
barometric pressure and temperature sensor industrial probe
one temperature point: 25°C (for new units)
(for new units)
NIST-traceable calibration certificate; 3 temperature points (for new units)
C-42
C
Loading...