Omega Products XBPT10-50PK User Manual

XBAFBS212-10PK,
$13.75 for pkg of 10

FEED-THROUGH SPRING
CAGE TERMINAL BLOCKS

L-32

L

Wire Connection

XBPT Series

Starts at

$

41

Pkg of 50

l Vibration-Resistance
l Global Acceptance
l Flexible Plug-In Bridge System
l Large Surface Area for Marking
l Standardized Testing System

The XBPT Series incorporates a spring cage connection system
proven in applications that are sensitive to vibration. The spring
mechanism always exerts the same constant force on the wire,
resulting in a vibration proof, gas-tight connection, and independent
of the user. The space-saving front connection, with the wire and
screwdriver coming in parallel from the same direction, allows for
simple wiring in places where there is little space available.

The connection point is opened with a standard screwdriver. After the
wire has been inserted into the wire guide of the terminal block, the
screwdriver is removed and the wire automatically makes contact.

The space-saving design and front entry design make the XBPT
Series ideal for control systems where there is little space. Even so,
they offer maximum connection space, resulting in fast wiring of
stranded and solid conductors, with or without ferrules. XBPT
terminal blocks are available with cross-sections from 2.5 mm

2

up to

35 mm

2

. The double bridge shaft can accommodate individual chain

bridging and step-down bridging from other terminal blocks.

SPECIFICATIONS FOR XBPT25 SERIES

Terminal Width: 5.2 mm (0.20")
Maximum Wire Size: 12 AWG/2.5 mm

2

IEC 60 947-7-1 in V/A/AWG: 800/32/28-12
EN 50 019 in V/A/AWG: 550/25 or 21/24-12
UL-cUL Ratings in V/A/AWG: 600/20/26-12

TECHNICAL DATA DIMENSIONS
Width/Length/Cover Width in mm (in): 5.2 (0.20)/48.5

(1.91)/2.2 (0.09)

Height for 35 x 7.5/35 x 15 in mm (in): 36.8 (1.45)/44.0 (1.73)
TECHNICAL DATA IN ACCORDANCE WITH IEC

Maximum Load Current in A/Cross Section in mm2: 31/4
Rated Surge Voltage in kV/Contamination Class: 8/3
Surge Voltage Category/Insulating Material Group: III/I

CONNECTION CAPACITY
Stranded with Ferrule with Plastic Sleeve in mm2: 0.25 to 2.5
Stranded with Ferrules without Plastic Sleeve in mm2:

0.25 to 2.5

Stranded with Twin Ferrule with Plastic Sleeve in mm2: 0.5
Stripping Length in mm (in): 10 (0.39)

XBPT Series
shown with
plug-in bridges
and ground
terminal block

All models
shown smaller
than actual size.

XBPT25-50PK, $41

To Order

(Specify Model Number)

MOST POPULAR MODELS HIGHLIGHTED!

L-33

SPECIFICATIONS FOR XBPT4 SERIES

Terminal Width: 6.2 mm (0.24")
Maximum Wire Size: 10 AWG/4 mm

2

IEC 60 947-7-1 in V/A/AWG: 800/40/28-10
EN 50 019 in V/A/AWG: 550/34 or 30/24-10
UL-cUL Ratings in V/A/AWG: 600/30/20-10

TECHNICAL DATA DIMENSIONS
Width/Length/Cover Width in mm (in): 6.2 (0.24)/56.0

(2.20)/2.2 (0.09)

Height for 35 x 7.5/35 x 15 in mm (in): 36.8 (1.45)/44.0 (1.73)

TECHNICAL DATA IN ACCORDANCE WITH IEC
Maximum Load Current in A/Cross-Section in mm

2

: 40/6
Rated Surge Voltage in kV/Contamination Class: 8/3
Surge Voltage Category/Insulating Material Group: III/I

CONNECTION CAPACITY
Stranded with Ferrule/with Plastic Sleeve in mm

2

: 0.25 to 4
Stranded with Ferrules without Plastic Sleeve in mm2: 0.25 to 4
Stranded with Twin Ferrule with Plastic Sleeve in mm2: 0.5 to 1
Stripping Length in mm (in): 10 (0.39)

MODEL NO. PRICE DESCRIPTION

XBPT4-50PK $44.00 Gray, 6.2 mm (0.24") spring clip TB 28 to 10 AWG, pkg of 50
XBPT4BU-50PK 44.00 Blue, 6.2 mm (0.24") spring clip TB 28 to 10 AWG, pkg of 50

ACCESSORIES

XBACPT4-10PK 4.40 Gray end cover, pkg of 10
XBATPT4-10PK 3.60 Partition plate, pkg of 10
XBAFBS26-10PK 3.40 Red 2 position plug-in bridge, pkg of 10 for XBPT4 Series
XBAFBS36-10PK 6.80 Red 3 position plug-in bridge, pkg of 10 for XBPT4 Series
XBAFBS56-10PK 13.25 Red 5 position plug-in bridge, pkg of 10 for XBPT4 Series
XBAFBS106-10PK 28.00 Red 10 position plug-in bridge, pkg of 10 for XBPT4 Series
XBAFBS506-10PK 170.00 Red 50 position plug-in bridge, pkg of 10 for XBPT4 Series
XBATSPAI4-10PK 80.00 Test adaptor, pkg of 10
XBMZBF6-10PK 4.40 White blank marker strip external labeling, pkg of 10
XBMZB6-10PK 4.60 White blank marker strip center labeling, pkg of 10
XBANS3575P 9.00 DIN rail 35 x 7.5 mm x 2 m (1.4 x 0.30" x 6.6') slotted
XBANS3575U 9.30 DIN rail 35 x 7.5 mm x 2 m (1.4 x 0.30" x 6.6') solid
XBANS3515P 17.00 DIN rail 35 x 15 mm x 2 m (1.4 x 0.60" x 6.6') slotted
XBANS3515U 17.00 DIN rail 35 x 15 mm x 2 m (1.4 x 0.60" x 6.6') solid
XBAES35C-50PK 43.00 1-screw mounted end stop, pkg of 50
XBAES35T-50PK 32.00 3-screw mounted end stop, pkg of 50
XBAES35N-50PK 27.00 Snap-on end stop, pkg of 50

Ordering Examples: XBPT4-50PK, spring clip terminal blocks, XBACPT4-10PK, end covers, XBANS3575P, DIN rail, $44 + 4.40 + 9 = $57.40.
XBPT4BU-50PK, blue spring clip terminal blocks, XBACPT4-10PK, end covers, XBMZB6-10PK, blank marker strips, XBANS3575P, DIN rail,

$44 + 4.40 + 4.60 + 9 = $62.

To Order

(Specify Model Number)

MOST POPULAR MODELS HIGHLIGHTED!

MODEL NO. PRICE DESCRIPTION

XBPT25-50PK $41.00 Gray, 5.2 mm (0.21") spring clip TB 28 to 12 AWG, pkg of 50
XBPT25BU-50PK 41.00 Blue, 5.2 mm (0.21") spring clip TB 28 to 12 AWG, pkg of 50
XBPT25WH-50PK 44.00 White, 5.2 mm (0.21") spring clip TB 28 to 12 AWG, pkg of 50
XBPT25RD-50PK 44.00 Red, 5.2 mm (0.21") spring clip TB 28 to 12 AWG, pkg of 50
XBPT25BK-50PK 44.00 Black, 5.2 mm (0.21") spring clip TB 28 to 12 AWG, pkg of 50

ACCESSORIES

XBACPT25-10PK 4.00 Gray end cover, pkg of 10
XBATPT4-10PK 3.60 Partition plate, pkg of 10
XBAFBS25-10PK 3.40 Red 2 position plug-in bridge, pkg of 10 for XBPT25 Series
XBAFBS35-10PK 6.80 Red 3 position plug-in bridge, pkg of 10 for XBPT25 Series
XBAFBS55-10PK 13.25 Red 5 position plug-in bridge, pkg of 10 for XBPT25 Series
XBAFBS105-10PK 28.00 Red 10 position plug-in bridge, pkg of 10 for XBPT25 Series
XBAFBS505-10PK 130.00 Red 50 position plug-in bridge, pkg of 10 for XBPT25 Series
XBATSPAI4-10PK 80.00 Test adaptor, pkg of 10
XBMZBF5-10PK 4.40 White blank marker strip external labeling, pkg of 10
XBMZB5-10PK 4.60 White blank marker strip center labeling, pkg of 10
XBANS3575P 9.00 DIN rail 35 x 7.5 mm x 2 m (1.4 x 0.30" x 6.6') slotted
XBANS3575U 9.30 DIN rail 35 x 7.5 mm x 2 m (1.4 x 0.30" x 6.6') solid
XBANS3515P 17.00 DIN rail 35 x 15 mm x 2 m (1.4 x 0.60" x 6.6') slotted
XBANS3515U 17.00 DIN rail 35 x 15 mm x 2 m (1.4 x 0.60" x 6.6') solid
XBAES35C-50PK 43.00 1-screw mounted end stop, pkg of 50
XBAES35T-50PK 32.00 3-screw mounted end stop, pkg of 50
XBAES35N-50PK 27.00 Snap-on end stop, pkg of 50

Ordering Examples: XBPT25-50PK, spring clip terminal blocks, XBACPT25-10PK, end covers, XBANS3575P, DIN rail, $41 + 4 + 9 = $54.
XBPT25RD-50PK, red spring clip terminal blocks, XBACPT25-10PK, end covers, XBMZB5-10PK, blank marker strips, XBANS3575P, DIN rail,

$44 + 4 + 4.60 + 9 = $61.60.