Omega Products XB3UKA25-25PK User Manual

L-25

DOUBLE AND TRIPLE LEVEL TERMINAL BLOCKS

Starts at

Pkg of 25

l Maintenance-Free Connections l Global Acceptance l Large Surface Area for Marking l Metal Parts Made of Tin-Plated Copper Alloy

The potentials of the XBUTT double-level terminal blocks are on two levels to reduce space requirements by 50% over single-level terminal blocks. The XBUTT Series can be bridged on both levels for maximum flexibility. Marking can be provided at each termination point.

The XB3UK sensor terminal blocks reduce installation time by terminating three-wire devices such as photoelectric and proximity sensors in a single terminal block. The XB3UK Series accommodates a design where the positive and negative connections are grouped so that only the signal lines and one pair of wires for the power supply need to be wired between the terminal box and the control. The upper level accommodates the markable feed-through terminals for the signal line. The two lower terminal points can be bridged. These are used for the sensor power supply. The positive and negative potential can be fed into the bridges with XB3UKF25. The first sensor can also be connected to this three-wire feedthrough block.

SPECIFICATIONS FOR XBUTT4 AND XBUTT4PV

Terminal Width: 6.2 mm (0.24") Wire Size: 10 AWG/4 mm

IEC 60 947-7-1 in V/A/AWG: 800/36/26-10 UL-cUL Ratings in V/A/AWG: 300/30/26-10 Width/Length/Cover Width in mm (in): 6.2 (0.24)/69.9

(2.75)/2.2 (0.09)

Height for 35 x 7.5/35 x 15 in mm (in): 65.0 (2.56)/72.5 (2.85)

SPECIFICATIONS FOR XB3UKA25 AND XB3UKF25

Terminal Width: 6.2 mm (0.24") Wire Size: 12 AWG/2.5 mm

Connection Data in V/A/AWG: 250/26/24-12 UL-cUL Ratings in AWG: 300/15/30-14 Width/Length for XB3UKA25 in mm (in): 6.2 (0.24)/55.0 (2.17) Width/Length for XB3UKF25 in mm (in): 6.2 (0.24)/72.5 (2.85) Height for 35 x 7.5/35 x 15 in mm (in): 54.5 (2.15)/62.0 (2.44)

ADDITIONAL SPECIFICATIONS

TECHNICAL DATA IN ACCORDANCE WITH IEC Maximum Load Current in A/Cross Section in mm

for

XBUTT4 and XBUTT4PV: 30/6 Maximum Load Current in A/Cross Section in mm

for

XB3UKA25, XB3UKF25: 26/2.5, 30/4 Maximum Cross Section with Insertion Bridge in mm

for

XB3UKA25, XB3UKF25: 4/2.5 Rated Surge Voltage in kV/Contamination Class for XBUTT4

and XBUTT4PV: 8/3 Rated Surge Voltage in kV/Contamination Class for

XB3UKA25, XB3UKF25: 4/3

Surge Voltage Category/Insulating Material Group: III/I CONNECTION CAPACITY

XBUTT4 and XBUTT4PV

Stranded with Ferrule/with Ferrule and Plastic Sleeve in mm

0.25 to 4/0.25 to 4

XB3UKA25, XB3UKF25

Stranded with Ferrule/with Ferrule and Plastic Sleeve in mm2:

0.25 to 2.5/0.25 to 2.5

MULTI-CONDUCTOR CONNECTION (SAME CROSS-SECTION) FOR XBUTT4 AND XBUTT4PV

Solid/Stranded in mm2: 0.14 to 1.5/0.14 to 1.5 Stranded with Ferrules without Plastic Sleeve in mm2: 0.25 to 1.5 Stranded with Twin Ferrule with Plastic Sleeve in mm2: 0.5 to 2.5

MULTI-CONDUCTOR CONNECTION (SAME CROSS-SECTION) FOR XB3UKA25, XB3UKF25

Solid/Stranded in mm2: 0.2 to 1.0/0.2 to 1.0 Stranded with Ferrules without Plastic Sleeve in mm2: 0.25 to 1.0 Stranded with Twin Ferrule with Plastic Sleeve in mm2: 0.5 to 1.0 Stripping Length for XBUTT4 and XBUTT4PV in mm (in): 9 (0.35) Stripping Length for XB3UKA25 and XB3UKF25 in mm (in):

8 (0.31)

Thread: M3 Torque for XBUTT4 and XBUTT4PV in in-lb (Nm):

0.6 to 0.8 (5.3 to 7.1)

Torque for XB3UKA25 and XB3UKF25 in in-lb (Nm):

0.5 to 0.6 (4.4 to 5.3)

XB3UKA25-25PK, $85

XB3UKF25-25PK, $120

L-26

Wire Connection

To Order

(Specify Model Number)

MOST POPULAR MODELS HIGHLIGHTED!

MODEL NO. PRICE DESCRIPTION

XBUTT4-25PK $70 Gray, 6.2 mm (0.24") wide double level TB 26 to 10 AWG, pkg of 25 XBUTT4PV-25PK 125 Gray, 6.2 mm (0.24") wide double level TB 26 to 10 AWG with potential

distribution between the levels, pkg of 25

XB3UKA25-25PK 85 Gray, 6.2 mm (0.24") wide triple level sensor TB 24 to 12 AWG, pkg of 25 XB3UKF25-25PK 120 Gray, 6.2 mm (0.24") wide triple level feed-through TB 24 to 12 AWG, pkg of 25

MODEL NO. PRICE DESCRIPTION

XBACUTT4-10PK $5.40 Gray end cover pkg of 10 for XBUTT4 and XBUTT4PV XBAEB10DIKB-10PK 29.00 Blue 10 position insertion bridge, pkg of 10 for XB3UKA25 and XB3UKF25 XBAEB10DIKR-10PK 29.00 Red 10 position insertion bridge, pkg of 10 for XB3UKA25 and XB3UKF25 XBAFBS26-10PK 3.40 Red 2 position plug-in bridge, pkg of 10 for XBUTT4 and XBUTT4PV XBAFBS36-10PK 6.80 Red 3 position plug-in bridge, pkg of 10 for XBUTT4 and XBUTT4PV XBAFBS56-10PK 13.25 Red 5 position plug-in bridge, pkg of 10 for XBUTT4 and XBUTT4PV XBAFBS106-10PK 28.00 Red 10 position plug-in bridge, pkg of 10 for XBUTT4 and XBUTT4PV XBAFBS506-10PK 170.00 Red 50 position plug-in bridge, pkg of 10 for XBUTT4 and XBUTT4PV XBATSPAI4-10PK 80.00 Test adaptor pkg of 10 for XBUTT4 and XBUTT4PV XBMZB6-10PK 4.60 White blank marker strip, pkg of 10 XBANS3575P 9.00 DIN rail 35 x 7.5 mm x 2 m (1.4 x 0.30" x 6.6') slotted XBANS3575U 9.30 DIN rail 35 x 7.5 mm x 2 m (1.4 x 0.30" x 6.6') solid XBANS3515P 17.00 DIN rail 35 x 15 mm x 2 m (1.4 x 0.60" x 6.6') slotted XBANS3515U 17.00 DIN rail 35 x 15 mm x 2 m (1.4 x 0.60" x 6.6') solid XBAES35C-50PK 43.00 1-screw mounted end stop, pkg of 50 XBAES35T-50PK 32.00 1-screw mounted end stop, pkg of 50 XBAES35N-50PK 27.00 Snap-on end stop, pkg of 50

ACCESSORIES

Ordering Examples: XBUTT4-25PK, double level terminal blocks, XBACUTT4-10PK, end covers, XBANS3575P, DIN rail, $70 + 5.40 + 9 = $84.40. XB3UKF25-25PK, triple level feed-through terminal blocks, XBMZB6-10PK, blank marker strips, XBANS3575P, DIN rail, $120 + 4.60 + 9 = $133.60.

XBANS3575P, $9

All models shown

smaller than actual size.

XBAES35C-50PK $43 for pkg of 50

XBUTT4-25PK, $70, marking and bridging on both levels off set design for easy termination and testing.

+ 1 hidden pages