Omega Products WT-2000 User Manual
HIGH-PERFORMANCE WIND TUNNEL
For Thermal Evaluation of Circuit Boards, Heat Sinks,
Components and Air Velocity Sensor Calibrations
WT-2000,
wind tunnel
C
Fan control cable
Power cord
(for US,
Canada and
Mexico)
Complete WT-2000 system package
includes wind tunnel, controller, fan
control and PC interface cables, PC
software, power cord and operator’s
manual, $4995. System shown smaller
than actual size.
WT-2000
$
4995
Complete Package
Portable Bench-Top Design
Provides Highly Accurate, Uniform and
Repeatable Air Flow up to 1000 fpm
Included Control Box Allows for Open
Loop Full Scale Operation of Individual
Fans, Groups of 2 Fans, or All 4 Fans
at a Time
PC interface
cable
C-26
Computer not included.
Free PC Based Open Loop Software
Allows User to Precisely Control Air
Flow Rate Using the Included USB
Cable to Connect to the Control Box
Large Test Chamber with a Hinged
Access Door and Small Access Panel
Allows for Fast Comparison Testing on
Many Different Size Heat Sinks and
Circuit Boards
Operates from 90 to 264 Vac Line Power
FREE
Control Software
INCLUDED!
WT-2000, $4995, with controller
and USB cable (both included).
Shown smaller than actual size.
The new thermal wind tunnel from OMEGA is
designed to give a highly accurate and uniform flow
rate. Four powerful DC fans are precisely controlled to
provide variable air speeds from 0 to 1000 ft/min. The
WT-2000 wind tunnel was designed to provide
thermal characterization of circuit boards, heat sinks
and components. The unit is made of clear
polycarbonate and PVC for a durable and transparent
assembly. The large test section is accessed by the
large hinged door and accommodates a removable
test plate, as well as a rail system that allows for a
wide range of mounting options. In addition, there
is a small access door that accommodates the quick
changing of smaller components and the placement
of sensors. Multiple access ports with
1
⁄
4
and
1
"
⁄
2
compression fittings are provided on the top and rear
panel of the wind
tunnel for the routing of wires and
insertion of sensors.
SPECIFICATIONS*
Wind Tunnel
Flow Rate: 0 to 5 m/s (0 to 1000 ft/min)
Size: 80.5 L x 18.4 W x 48.4 cm H (31.7 x 7.3 x 19.1")
Weight: 12.48 kg (27.5 lb)
Test Chamber: 43 x 8.25 cm cross section (17 x 3.25")
Fan Speed: 3800 RPM
DC Fan Motor: 12 Vdc @ 0.47A ea (5.6W ea) x 4
Noise: 61 dBA max, 1 meter away
Electrical Control Box
Power: 90 to 264 Vac @ 47 to 63 Hz
Fuse: 2A fast acting 5 x 20 mm cartridge type
Size: 16 L x 13.8 W x 6.7 cm H (6
1
7
x 4
⁄
4
11
x 2
⁄
16
")
⁄
16
Weight: 0.9 kg (2 lb)
PC Interface: USB
Operating Temperature: 5 to 45°C (41 to 113°F)
Operating Relative Humidity: Less than 80%
without condensation
All specifications measurements at ambient room temperature
*
of 22.2°C (70°F) with less than 80% relative humidity and
760 mm (29.92") of Hg barometric pressure.
Open Loop Velocity Control: Allows for quick and
simple modification of individual fan velocity using
direct entry or directional arrows. (Requires Windows
®
2000
, XP, or Vista Operating System)
C-27
Loading...