Omega Products WSS1-18-56CB User Manual

WashdoWn duty stainless steel 3-Phase aC Motors
WSS12-18-56CRD, ½ HP SS motor without base.
Both models shown smaller than actual size.
WSS Series
l 1⁄3 to 2 HP, 3600 and 1800 RPM l 208 to 230/460 Volt l TEFC Enclosure l 1.15 Service Factor l Class F Insulation l C-Face—Rigid Base and Round Body l Double Lip Seals on Both Ends of
the Motor with an Additional Shaft Slinger on the Drive-End
l O-Rings Installed on Endbells to
Eliminate Moisture
l Pre-Installed Watertight, Stainless
Cord Connector
l Inverter Duty l Suitable for 50 Hz Operation with
1.0 Service Factor
The WSS Series stainless steel motors are 3-phase industrial grade washdown duty motors made with 300 grade stainless steel housing, in sizes from motors are available with a double reinforced welded 56H base or without a base in the round body style. All motors are constructed with the windings double dipped and cured
1
3 to 2 H.P. These
WSS34-18-56CB, ¾ HP SS motor with base.
in polyester insulating varnish, anti-rust coated rotor to protect against corrosion, double-lip seals plus V-ring shaft slingers. All motors have laser-etched full-fact name plates and a watertight stainless cord connector pre-installed in the split designed conduit box.
SPECIFICATIONS
Voltage: 230/460V, 3 phase 60 Hz—can
run on 50 Hz with reduced service factor of 1.0
Frame/Enclosure: 56C/TEFC, 300 grade stainless steel
Rated Speed: 1725/3460 Duty Cycle: Continuous Base Type: C-face—rigid Shaft: Keyed, 304 Stainless Steel Bearings: 6205 DDU Rotation: CW/CCW
1
DIMENSIONS: mm (inch)
MOUNTING
A B C D G P AA ABE 2F1 2F2 H BA
mm
(inch)
62
(2.44)
76.2 (3)
127
(5)
8.64
(0.34)
69.9
(2.75)
165
(6.5)
165
(6.5)
*See
note
88.9 (3.5)3 (0.12)
216
(8.5)
21.8
(0.86)
146
(5.75)
KEY KEYSEAT FLANGE SHAFT TERMINAL BOX
BC
mm
(inch)
* Note: C = 294 mm (11.59") for 1⁄3 to 1⁄2 H.P., C = 319 mm (12.57") for 3⁄4 to 3 H.P.
4.83
(0.19)
ES S R AJ AK BB BF N-W U XC XD
35.8
(1.41)
4.78
(0.188)
13.13
(0.517)
149
(5.875)
114
(4.5)
4.06
(0.16)
(3⁄8-16)
47.8
(1.88)
15.9
(0.625)
83
(3.27)
96.5 (3.8)
To Order Visit omega.com/wss_series for Pricing and Details
FULL LOAD AMPS @
MODEL NUMBER HP RPM
208 to 230 V 460 V MOTORS WITH BASE
WSS13-18-56CB WSS12-36-56CB WSS12-18-56CB WSS34-36-56CB WSS34-18-56CB WSS1-36-56CB WSS1-18-56CB WSS1.5-36-56CB WSS1.5-18-56CB WSS2-36-56CB WSS2-18-56CB
1
3 1800 1.4 0.7 1.0 28
1
2 3600 1.8 0.9 0.7 29
1
2 1800 1.5 0.75 1.5 31
3
4 3600 2.3 1.15 1.1 33
3
4 1800 2.4 1.2 2.2 33 1 3600 3 1.5 1.5 35 1 1800 3.2 1.6 3 36
1.5 3600 4 2 2.2 39
1.5 1800 4.2 2.1 4.4 42 2 3600 4.8 2.4 2.9 45 2 1800 6 3 5.9 51
ROUND BODY MOTORS
WSS13-18-56CRD WSS12-18-56CRD WSS34-18-56CRD WSS1-18-56CRD WSS1.5-18-56CRD WSS2-18-56CRD
Ordering Examples: WSS13-18-56C, stainless steel washdown duty 3-phase motor with base, 1⁄3 HP, 1800 RPM, 0.7 Amps @ 460 V, rated torque 1 lb.ft. WSS1-18-56CRD, stainless steel washdown duty 3-phase round body motor without base, 1 HP, 1800 RPM, 1.6 Amps @ 460 V, rated torque 3 lb.ft.
1
3 1800 1.4 0.7 1 28
1
2 1800 1.5 0.75 1.5 31
3
4 1800 2.4 1.2 2.2 33
1 1800 3.2 1.6 3 36
1.5 1800 4.2 2.1 4.4 42 2 1800 6 3 5.9 51
RATED TORqUE
(lb. ft.) WEIGHT
2
Loading...