C-119
NORGREN EXCELON
®
PRESSUR
RELIEF VALVES
V72G Series
Starts at
$
50
l In-Line or Modular Installation
l Push to Lock Adjusting Knob
with Tamper Resistant Accessory
l Helps Protect Air Operated
Equipment from Over Pressure
by Retarding Excessive Pressure
Build Up
SPECIFICATIONS
Fluid: Compressed air
Maximum Pressure: 20 bar (300 psig)
Operating Temperature*:
-34 to 65°C (-30 to 150°F)
MATERIALS
V72:
Gage Port:1⁄8" PTF with PTF main
ports; 1⁄8" ISO Rc with ISO G
main ports
Exhaust Port:1⁄4" PTF with PTF
main ports; 1⁄4" ISO Rc with
ISO G main ports
V72G:
Body: Zinc
Bonnet: Acetal
Elastomers: Neoprene
Bottom Plug: Acetal
V74G:
Body and Bonnet: Aluminum
Valve: Aluminum and nitrile
Elastomers: Nitrile
Bottom Plug: Acetal
*
Air supply must be dry enough to
avoid ice formation at temperatures
below 2°C (35°F).
OPTIONS SELECTOR
V7G-
-N
Gage Substitute
With G
Without N
Relief pressure
adjustment range* Substitute
0.3 to 4 bar (5 to 60 psig) F
0.3 to 10 bar (5 to 150 psig) M
0.7 to17 bar (10 to 250 psig) S
Adjustment Substitute
Knob K
T-bar T
*
Relief valve can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to
control pressures outside of the specified ranges.
**
Units with 250 psig relief pressure range are available only with the T-bar adjustment; therefore substitute T at the
7th position and S at the 9th position.
Port size Substitute
1
⁄4" (72) 2
3
⁄8" (72, 74) 3
1
⁄2" (74) 4
3
⁄4" (74) 6
Series Substitute
72 2
74 4
Threads Substitute
PTF A
ISO G parallel G
V72G-2AK-NMG, $50, shown
smaller than actual size.
V74G-3AK-NMG, $78, shown
smaller than actual size.