Universal Wireless
UWTC-REC6
shown actual
size.
Transceiver Module
Easily Add Wireless
Sensor Capability to
Your Meter, Controller,
Recorder or
All models
shown smaller
than actual size.
Data Logger!
Up to 120 m
(400') wireless
UWTC-2 universal wireless
thermocouple connector,
see omega.com.
The UWTC takes the wireless
signal from any UW Series
wireless transmitter and
outputs a voltage signal
compatible with standard
process instruments.
1.8 m (6')
cable
U Add Wireless Capability
PATENT
PENDING
to Any Standard
Process Input Instrument
U Analog Output Signal
U Easily Connect to
Panel Meters
PLCs, Chart
, Controllers,
Recorders
and Data Loggers
U Simple, Single Channel
Operation
U Includes Mounting Bracket
and 1.8 m (6') Integral Cable
U Powered From Host
Instrument or External
Power Supply
U Compatible with All
OMEGA UW Series
Wireless Transmitters
With OMEGA’s new universal
wireless transceiver modules you
can eliminate
between your sensor and instrument.
the wire connection
analog input on your instrument
and you’ll be able to receive
wireless measurements from many
different wireless sensors including
OMEGA’s wireless thermocouple
and RTD connectors, pH, infrared
temperature, relative humidity,
process input transmitters and our
NB9 Series of industrial wireless
probe/transmitters assemblies.
SPECIFICATIONS
Power: 12 to 24 Vdc @ 50 mA
Analog Output: 1, non-isolated,
retransmission 0 to 5 Vdc, 0 to 10 Vdc
Connection: 1.8 m (6') integral analog
output cable (included) with stripped wire
termination, for both power and output
Ambient Operating Range:
-10 to 70°C (14 to 158°F), 0 to 95% RH
(non-condensing)
Radio Receiver Frequency (RF): 2.4 GHz
Enclosure: ABS (plastic)
Dimensions: 76 L x 32 W x 26 mm H
(3 x 1.25 x 1")
Interfaces Directly with
PLCs and Multi-Channel Data
Loggers to Form a Complete
Wireless Measurement and
Control System!
UWTC-REC6.
DP24-E, process
indicator, sold
separately, see
omega.com.
Simply connect
transceiver to the
this
To Order Visit omega.com/uwtc-rec6 for Pricing and Details
Model No. Description
UWTC-REC6-(*) Wireless transceiver for UW series wireless connectors and transmitters
REC6-PC Programming cable and Windows® setup software (one required)
PSU-93 24 Vdc, 200 mA power supply (optional)
Comes complete with 1.8 m (6') integral cable, mounting bracket, and operator’s manual.
* Specify analog output signal: “V1” for 0 to 5 Vdc or “V2” for 0 to 10 Vdc.
Ordering Example: UWTC-REC6-V1, wireless transceiver/converter with 0 to 5 Vdc analog output.
W-23