Page 1
Wireless Connector/
Transmitter Receivers
Monitor Up to 48 Temperature, Ph,
Process or Humidity Signals
UWTC-REC Series
U Receive Signals from
UWTC, UWRTD, UWRH,
UWPH and UWPC
Transmitters
U Analog Output Available
U USB Interface for Fast
Installation—Cable
Included!
U Digital Display Available
U Weather Resistant NEMA
Enclosure Available
U TC Central Software
Included—Converts Your
PC into a Chart Recorder
or Data Logger
U Display and Log Data,
Ambient, Signal Strength
and Battery Status in
Real Time
UWTC-REC1
transmitter/receivers
are compatible with all
connector/transmitters,
including:
• UWTC thermocouple
connectors/
transmitters
• UWRTD RTD
connectors/
transmitters
• UWRH relative
humidity transmitter
• UWPH pH
transmitters
• UWPC process
transmitters
Free Software
Included
UWTC-REC1
All models shown smaller
than actual size.
The new OMEGA® wireless
connector/transmitter receivers are
compact devices that receive the
transmitted signals from UWTC
Series transmitters, and display/log/
graph the data on your PC. TC
Central software, included with
each unit, displays the measured
and ambient temperatures, along
with RF signal strength and battery
condition. The TC central software
can turn your PC into a recorder
or data logger so readings can be
saved and later printed or exported
to a spreadsheet file.
The UWTC-REC1 is a 48-channel
receiver with USB connection;
the UWTC-REC-2 adds an
analog output that can be used to
retransmit a 0 to 5 Vdc, 0 to 10 Vdc,
type K thermocouple or 4 to 20 mA
signal to a remote meter, controller,
PLC or data acquisition instrument.
Both are available with an
optional NEMA rated enclosure;
UWTC-REC2 units are also
available with an optional digital
display.
UWTC-1 thermocouple
transmitter. See omega.com
for the complete selection
of compatible wireless
transmitters.
UWTC-REC3
32-channel
receiver with
ethernet. See
omega.com
for details.
UWTC-REC3 receiver/host with
ethernet is compatible with UWTC,
UWRTD, UWRH and UWIR series
transmitters, and connects directly
to your network or the Internet—
no PC required!
W-25
UWTC-REC2-D with
analog output and display.
Internet
Enabled!
UWTC-REC1-NEMA
with NEMA-rated enclosure.
Page 2
Combine One of These Wireless Receivers with Multiple Wireless
Connectors or Wireless Probe Assemblies to Form a Complete
Wireless Measurement System!
Data Logging and
Recording Software
Included
TC Central Software
U Display, Log and Chart
Data from up to 48
Wireless Instruments
U Easy Setup and
Operation
U High/Low Alarms
U Programmable
Engineering Units
U Transmission, Signal
Strength and Battery
Power Indicators
U Data Export to CSV File,
Chart Export to Clipboard
U Included with UW and
MWTC Wireless
Instruments
10 Vdc or Type K thermocouple output.
Mating connector and cable included.
USB connection
(cable included)
UWTC-REC2 models are available
with 4 to 20 mA, 0 to 5 Vdc, 0 to
Data Logging
Charting
W
Laptop not included.
Compatible with 32-bit Windows
(2000, XP, Vista or 7) OS
Latest software version available for
free download at ftp.omega.com
Radio Frequency (RF) Transceiver
SPECIFICATIONS
Power: USB-powered device; receives
power from host; UWTC-REC2 units
also require dc power supply for analog
output (AC adaptor included)
Operating Environment: -10 to 70°C
(14 to 158°F)
Carrier: ISM 2.4 GHz, direct sequence
spread spectrum
RF Data Packet Standard: IEEE 802.15.4,
open communication architecture
Software (Included):
Requires Windows
CE Compliance: Standard
®
OS
Note: Because of transmission frequency
regulations, these products may only be used
in the United States, Canada and Europe
(please note CE compliance of the specific
model for use in Europe)
To Order Visit omega.com/uwtc-rec1_2 for Pricing and Details
Model No. Description
UWTC-REC1 USB powered 48-channel transmitter receiver
UWTC-REC1-NEMA USB powered 48-channel transmitter receiver with NEMA enclosure
UWTC-REC2-(*) 48-channel transmitter receiver with analog output
UWTC-REC2-D-(*) 48-channel transmitter receiver with analog output and digital display
UWTC-REC2-(*)-NEMA 48-channel transmitter receiver with analog output, NEMA enclosure
UWTC-REC2-D-(*)-NEMA 48-channel transmitter receiver with analog output and digital display,
NEMA enclosure
UWTC-CABLE Additional USB programming/communication cable
Comes complete with measurement/data logging software, USB cable, and operator’s manual. UWTC-REC2 units also include
AC power adaptor.
Specify analog output signal: “V1” for 0 to 5 Vdc; “V2” for 0 to 10 Vdc, “TC” for Type K thermocouple, or “MA” for 4 to 20 mA.
*
Ordering Examples: UWTC-REC1, USB powered 48-channel transmitter receiver.
UWTC-REC2-D-V1-NEMA, 48-channel transmitter receiver with analog output and digital display, NEMA enclosure.
W-26
Loading...