Omega Products TWA5-100 User Manual

SELF-ADJUSTING WEIGH ASSEMBLIES

LCM501 LOAD CELL INCLUDED

J MIN./MAX."R" HEX

SEE "LOAD CELL BOLT TORQUE"

"G" DIA. THRU, 8 PLA

CES

Square

WITH LCM501 SERIES LOAD CELL INCLUDED

STANDARD AND METRIC MODELS

TWA5/TWAM5 TWA6/TWAM6

TWA5/TWAM5 (Nickel-Plated Carbon Steel) TWA6/TWAM6 (Stainless Steel) 0-100 lb to 0-20,000 lb 0-25 kgf to 0-10,000 kgf

Starts at

METRIC

TWAM5-250, $560, shown smaller than actual size, includes LCM501-250 load cell. See page F-73 for details.

560

Standard

⻬ Heavy-Duty Design ⻬ For Tank and

Bin Weighing

⻬ Self-Adjusting for

Accurate Measurements

⻬ Highly Corrosion-Resistant

Materials

⻬ Shipped Fully Assembled,

Including Load Cell

⻬ 5-Point Calibration

Provided

⻬ 150% Compression

Overload

⻬ Ideal for Multicell

Installations

SPECIFICATIONS

Non-Parallel Mounting:

Self-adjusting for surfaces up to 2°

Thermal Expansion:

Self-adjusting for up to ±1.6 mm

Height: Adjustable per dimension “J” Weight: Standard Range kgf (lb)

(Including 100 to 750 4.5 (10) Load Cell) 1000 to 5000 10.5 (23)

5-Point Calibration (in Compression):

0%, 50%, 100%, 50%, 0%

10,000 11.5 (25) 20,000 25 (55)

Metric Range kgf (lb)

25 to 250 4.5 (10) 500 to 2500 10.5 (23) 5000 11.5 (25) 10,000 25 (55)

Dimensions: mm (in)

CAPACITY

kgf (lb)

≤375 146 102 88.9 63.5 13.5 63.5 95.3/102 25.4 101.6 127 12.7 14.2 30

(≤750) (5.75) (4.00) (3.50) (2.50) (0.53) (2.50) (3.75/4.00) (1.00) (4.00) (5.00) (0.50) (0.56) (22)

500 to 2.5K

(1 K to 5K)

(10K) (9.75) (6.75) (6.00) (4.50) (0.68) (4.50) (5.00/5.25) (1.50) (6.50) (8.00) (0.75) (88) (180)

10K 311 216 191 140 20.6 140 184/191 63.5 203 254 25.4 28.4 245

(20K) (12.3) (8.50) (7.50) (5.50) (0.81) (5.50) (7.25/7.50) (2.50) (8.00) (10.00) (1.00) (1.12) (180)

ABD EGH J KLMPR

222 146 152 114 17.3 114 121/127 38.1 165.1 203 19 14.2 76

(8.75) (5.75) (6.00) (4.50) (0.68) (4.50) (4.75/5.00) (1.50) (6.50) (8.00) (0.75) (0.56) (56)

5K 248 171 152 114 17.3 114 127/133 38.1 165.1 203 19 22.4 245

F-76

TORQUE

N-m (ft-lb)

LOAD CELLS

SELF-ADJUSTING WEIGH ASSEMBLIES

MOST POPULAR MODELS HIGHLIGHTED!

To Order (Specify Model Number)

WEIGHING ASSEMBLIES WITH LOAD CELL

CAPACITY CARBON STEEL STAINLESS STEEL

kgf lb MODEL NO. PRICE MODEL NO. PRICE MODEL NO. PRICE

STANDARD MODELS

45 100 TWA5-100 $560 TWA6-100 $735 LC501-100 $340 91 200 TWA5-200 560 TWA6-200 735 LC501-200 340

27 500 TWA5-500 560 TWA6-500 735 LC501-500 340

2 341 750 TWA5-750 560 TWA6-750 735 LC501-750 340 455 1000 TWA5-1K 615 TWA6-1K 745 LC501-1K 350

909 2000 TWA5-2K 615 TWA6-2K 745 LC501-2K 350 1361 3000 TWA5-3K 615 TWA6-3K 745 LC501-3K 350 2269 5000 TWA5-5K 615 TWA6-5K 745 LC501-5K 350 4537 10,000 TWA5-10K 805 TWA6-10K 970 LC501-10K 695 9074 20,000 TWA5-20K 1055 TWA6-20K 1220 LC501-20K 695

METRIC MODELS

25 55 TWAM5-25 $560 TWAM6-25 $735 LCM501-25 $340

50 110 TWAM5-50 560 TWAM6-50 735 LCM501-50 340 100 220 TWAM5-100 560 TWAM6-100 735 LCM501-100 340 250 551 TWAM5-250 560 TWAM6-250 735 LCM501-250 340 500 1102 TWAM5-500 615 TWAM6-500 745 LCM501-500 340

1000 2205 TWAM5-1K 615 TWAM6-1K 745 LCM501-1K 350 2500 5512 TWAM5-2.5K 615 TWAM6-2.5K 745 LCM501-2.5K 350 5000 11,023 TWAM5-5K 805 TWAM6-5K 970 LCM501-5K 445

10,000 22,046 TWAM5-10K 1055 TWAM6-10K 1220 LCM501-10K 695

Note: Weighing assembly is shipped fully assembled including the load cell. Load cell comes with 5-point NIST-traceable calibration and 59 kΩ shunt data.

Ordering Examples: TWA6-5K, 5000 lb weighing assembly in stainless steel with LC501-5K load cell included, $745.

TWA5-750, 750 lb weighing assembly in carbon steel with LC501-750 load cell included, $560. TWAM6-2.5K, 2500 kgf capacity stainless steel weighing assembly with LCM501-2.5K, load cell (included), $615. TWAM5-250, 250 kgf capacity carbon steel weighing assembly with LCM501-250, load cell (included), $560.

LC501 series load cell will be installed into the TWA module.

REPLACEMENT

LOAD CELL

See Sec

ook

ect

cal

s Avai

omeg

t n of Sc ,

and Re

Sel

Techni

ion Y

ble

com

ere

fro

or a

ﬁc

COMPATIBLE METERS/CONTROLLERS FOR PX309 SERIES PRESSURE TRANSDUCERS

Starting at $150, the iSeries is available in 1⁄32, 1⁄16, and 1⁄8 DIN program mable process controllers with serial and embedded Internet/Ether net com muni cations (Order EI Option CNi16D). The iSeries features programmable color displays, free software and ActiveX Controls, selectable full autotune PID control, and NEMA 4 (IP65) rated front bezel. Ordering Examples: DPiS8, strain/process (monitor only), 1⁄8 DIN, $300; CNiS8, strain/process controller with 2 control outputs, $370. See pages D-7 thru D-21 for the complete selection.

F-77

+ 1 hidden pages