Omega Products TW-2 LN User Manual
Handheld Thermal
Wire Strippers
For Plastic and Rubber
Starts at
$
371
Covered Wire
Strips ALL Insulations... PFA... NYLON...
RUBBER...NEOPRENE... VINYL... PLASTICS
Thermal Wire Stripping to Highest Industrial Standards
Long Life, Low-Cost Blade is Easily Replaced
Ruggedly Built for Production Use
Self-Contained, Handheld
Designed especially for electronic
assembly to aerospace standards,
the OMEGA®wire strippers combine
high production rates with
consistently high wiring reliability. It is
especially valuable when working
with fine gage wire. Each unit has
adjustable strip and wire-gage stops.
The rugged alloy blades have a
long life under demanding production
schedules. They heat to
temperatures of 926°C (1700°F) in
less than two seconds. They also
cool instantly, eliminating the need
for special racks or holding clips and
providing complete operator safety.
Completely self-contained, the
standard OMEGA wire stripper uses
no external transformer or power
supplies. The compact, solid state
Temperature Control Unit supplied
with some models is used to reduce
blade temperature for certain
insulation materials that burn,
scorch or emit fumes when touched
by the 926°C (1700°F) blade
temperature.
Because of the unique gage stop,
adjustable from #10 to #38 AWG,
the blades of the OMEGA wire
stripper do not exert any pressure
on the conductor itself. In addition
to positively eliminating nicks
or deformation, this feature also
protects the remaining insulation
against damage, since the wire
itself is not heated. The cut is
clean and square, and no sleeving
is melted into the wire strands.
Insulation is easily cut at any
predetermined point, and the
unwanted slug is quickly
removed. Wire ends are ready
instantly for soldering orother
means of connection.
Ideal for
Stripping
Thermocouple
Wire
H
Handheld Thermal
Wire Stripper
For Metal
Sheath Strippers!
See Page H-61
Blades are long-lasting,
low cost and easily replaced.
H-50
Handheld Thermal Wire Strippers
for Plastic and Rubber Covered Wire
ALL MODELS AVAILABLE
FOR FAST DELIVERY!
Model TW-1: “Standard” Model–
For general production work. Completely
self-contained. Has adjustable stops for
both wire gage and strip length.
Model TWC-1: Controlled
Temperature–Has solid state
temperature control. Temperature
adjustable from 38°C (100°F) to above
926°C (1700°F). Solid state control
mounts as electrical outlet, eliminating
bench clutter. Blades reach selected
temperature in less than two seconds.
Model TW-2 LN: Long Nose–
Strips up to 90 mm (3.5") in a single
stripping action. Same operating
features as the TW-1, except unit has
four extra-long electrodes. Useful for
stripping in inaccessible areas.
Model TW-6: Cable Stripper–
Designed especially for slitting and
removing the outer coverings of cables.
Removes PFA coated as well as lowtemperature coaxial coverings.
For coax cable or wire diameters
15.8 mm (0.625") or less.
Model TWC-6: Controlled
Temperature–Same as the TW-6, but
includes temperature control unit for
adjustments from 38°C (100°F) to
above 926°C (1700°F).
Note: Temperature control unit included with
TWC-1 and TWC-6. Temperature control
unit is also available for all other models.
Order model number TC-1, $145.
Accessories
Model TBM Bench-Mounting Fixture
For holding any STRIPALL wire
stripper in fixed work position.
Stripper can be removed from fixture
when handheld operation is desired.
Price: $36
Replacement Blades
To order notched replacement blades
for all two-blade models, specify
model number RBN. Price: $9/pair
Unnotched replacement blades for use
on fine gage wire 26 to 38 AWG can
be ordered as model number RVUN.
Price: $9/pair
To order a replacement blade for
models TW-6 and TWC-6, use
model number RBN-6-TW6.
Price: $26.50/unit
TW-6, $494, not shown, visit omega.com/tw_twc
All models shown smaller
than actual size.
Standard Wire Strippers
All models are 115 volts ac, 60 Hz line
voltage, 60 watts.
High Voltage OMEGA
Wire Strippers
All models are available for operation
on 220 volt ac, 50 Hz line voltage,
60 watts. For high voltage models, add
“220” to the end of model number.
Ordering Example: TW-1 220, high voltage
standard wire stripper, $420.
Note:
Comes with 1 pair of blades
for 10 to 25 AWG (RBN) installed.
TW-1, $371.
TWC-1, $475.
TC-1 standard
control, $145.
TW-2LN, $392.
TWC-6, $570.
Also available:
TBM bench fixture, $36.
temperature
H-51
Loading...