Omega Products TRCIII-A-230VAC User Manual

ice point™ Calibration
Reference Chamber

High Precision Thermoelectric Chamber
Uses Water to Maintain 0°C (32°F) Continuously

U Stylish Design

TRCIII-A

Standard

230 Vac

model

only

U Portable Rugged Case for Use in the

Factory, Calibration Laboratory, or
Instrument Shop

U Built-in Temperature Readout

with 0.1 (°F/°C) Resolution

U Accepts up to 6 Probes at One Time
U Calibration of All Probe Type

Thermometers and Sensors

TRCIII-A shown smaller than actual size.

The ice pointTM TRCIII-A Calibration Reference
Chamber is part of OMEGA’s fine line
of calibration reference instrumentation.

The TRCIII-A ice pointTM Reference Chamber relies on
the equilibrium of ice and distilled, deionized water at
atmospheric pressure to maintain 6 reference wells at
precisely 0°C (32°F). Each well extends into a sealed
cylindrical chamber containing the distilled deionized
water. The outer walls of the chamber are cooled
by thermoelectric cooling elements. The increase in
volume produced by the creation of ice crystals within
the cell is sensed by the expansion of a bellows,
which operates a microswitch and controls the cooling
elements. The alternate freezing and thawing of the
ice accurately maintains a 0°C (32°F) environment
around the reference wells.

K

Probes sold separately;
please next page.

Features

U 230 Vac CE Marked Models
U NIST Calibration Certificate Included
U Bench-Top Design with Tilt Handle

Standard

U Illuminated Power Switch
U Companion hot point® Dry Block

Probe Calibrator Available
(Model CL900A/950A)

K-14

Specifications

Reference Wells: 6 wells, 4.0 mm

5

(

⁄32") ID, 95.25 mm (33⁄4") deep;
wells are thermally and electrically
grounded to each other; accepts

1

3 mm (

Reference Temperature: 0°C (32°F)
Accuracy: ±0.1°C (±0.18)
Stability: ±0.03°C (±0.07) for

constant ambient
Environmental Ambient:

2 to 32°C (35 to 90°F)

Power: 115/230 Vac, 50 Hz, 104 W
Stabilization Time: 2 hours after

initial power up
Dimensions:

203 H x 419 W x 305 mm D
(8 x 16

Weight: 11.8 kg (26 lb)

⁄8") OD probes

1

⁄2 x 12")

OMEGACARESM extended

SM

warranty program is available
for models shown on this
page. Ask your sales

Extended Warranty

Program

Unit must not be allowed to

freeze or damage will result.

We make running changes when

technical advances allow. Check at time

of ordering for additional features.

representative for full details
when placing an order.
OMEGACARE
labor and equivalent loaners.

Caution:

SM

covers parts,

TRP Applications

Thermocouple leads

Connectors

TRP Applications

Copper leads

Series TRP Reference Probes

–
up to 6 can be used at
the same time

Model TRCIII-A

Working
thermocouple
under test in a
known temperature
environment

White-coded
copper-copper

Supplied with male
and female
color-coded
thermocouple
connectors

connectors

To Order Visit omega.com/trciii-a for Pricing and Details

Model No. Description
TRCIII-A ice point™ reference, 120 Vac operation
TRCIII-A-230VAC* ice point™ reference, 230 Vac operation

Comes complete with operator’s manual and NIST calibration certificate.

Note: Only 230 Vac model is available as CE marked.

*

Ordering Examples: TRCIII-A, ice point™ reference cell, TRP-K, TRP-J, TRP-T, TRP-E,
Type K, J, T and E temperature reference probes.

OCW-3, OMEGACARESM extends standard 1-year warranty to a total of 4 years.

TRCIII-A Accessories

TRP-T shown with additional wires attached to mating connectors.

Thermocouple TRP Probes
Thermocouple Material Type

Thermocouple
TRP Features

U Made with Special Limits

of Error Material

U All Standard

Calibrations Available

U Comes Complete with

Mating Connectors

U Can Be Ordered with

12, 24 or 36" Leads

Model No. + -

TRP-K CHROMEGA® ALOMEGA®

TRP-T Copper Constantan

TRP-E CHROMEGA® Constantan

TRP-J Iron Constantan

TRP-S Platinum Platinum 10% Rh

TRP-R Platinum Platinum 13% Rh

TRP-B Platinum 30% Rh Platinum 6% Rh

TRP-C W 5% Re W 26% Re

TRP-D W 3% Re W 25% Re

Refrigeration required for below ambient cooling.

*

Available as an option where not supplied as standard as HCTB-COIL.

**

††

For 240 Vac power, add suffix “-240V” to model number, no additional charge.

Note: For 4-point NIST calibration, points: -20°C, 60°C, 120°C, 180°C, add suffix “-NIST” to

model number for additional cost.

K-15