Omega Products TPJ-T-F User Manual

3-Prong Snap-In Panel Jacks

16.12

(0.635)

24.6

(0.97)

55.62

41.4 (1.63)

(2.19)

For Thermocouples and RTD’s

 Accepts Heavy Duty

OTP- Type 3-Prong Connectors

 No Additional Mounting

Hardware Required

 No Installation Tools Required  Interlocking  Color-Coded  Numbered

55.6 mm (2.19")

 Reusable  FREE! ID Number Labels

Included with Each Jack

 Combo Phillips/Slot Screws

19.1 mm (0.75")

Note: Panel jacks are available with male pins. See ordering example.

Removal Tool SIRT-2, $15

For the large volume user who requires the ability to quickly remove installed connectors, the SIRT-2 removal tool is invaluable. Operating easily even in densely packed panels, the tool compresses all spring clips together, allowing the TPJ to be pushed out of the panel from the rear.

Panel Cutout

Dimensions: mm (inches)

Mounting hardware has been eliminated in

Shown

smaller than

actual size.

the TPJ-style panel jacks by including the retaining spring clips as a part of the body design. A small tab and notch are provided to maintain straight, even rows without the need for precision machining.

Aluminum panel not included. See panel punches page G-48.

The TPJ color-coded jacks accept OTP-style 3-prong male connectors, and are available in ANSI calibrations

 Accepts Stranded or

J, K, T and E, as well as uncompensated for RTD’s and thermistors.

Solid Wire up to Size 14 AWG

 Combination Phillips/

Slot Screws

Discount Schedule

1-10 …………………………Net 11-49 ………………………5% 50-99 ………………………10% 100-999 ……………………15% 1000-4999 …………………20% 5000 and over ……………25%

Extra ID Number Labels:

Model 1-6L, $1.25 for 1 thru 6 Model 1-12L, $1.50 for 1 thru 12 Model 1-18L, $1.75 for 1 thru 18 Model 1-24L, $2.00 for 1 thru 24 Model 1-50L, $2.50 for 1 thru 50 Model 1-100L, $3.00 for 1 thru 100

We make running changes

when technical advances allow.

Check at time of ordering

for additional features.

MOST POPULAR MODEL HIGHLIGHTED!

To Order (Specify Model Number)

Alloy Thermocouple Used Used in Connector Shell Number of Code†With Connector +–GColor (Female) Jack

† K, T, J and E are ANSI designations. NOTE: Type U (Uncompensated) connectors are used with type B thermocouples (Pt/6% Rh-Pt 30% Rh), RTD’s and thermistors. To order jacks with male connector prongs, change “-F” in model no. to “-M”; no additional charge Ordering Example for Standard Female Panel Jack: TPJ-K-F, female 3-prong snap-in panel jack, $4.70. Ordering Example for Panel Jack with Male Pins: TPJ-K-M, male 3-prong snap in panel jack, $4.70

Type of Compensating Alloy Model Price

CHROMEGA®-

ALOMEGA

Copper-Constantan Copper Constantan Copper Blue TPJ-T-F 4.70

Iron-Constantan Iron Constantan Copper Black TPJ-J-F 4.70

CHROMEGA®-

Constantan CHROMEGA®Constantan Copper Purple TPJ-E-F 4.70

Uncompensated-RTD Copper Copper Copper White TPJ-U-F 4.70

CHROMEGA®ALOMEGA®Copper Yellow TPJ-K-F $4.70

G-44