Omega Products OMA-GUARDIT User Manual

OMA-GUARDIT
Extended Warranty
Program
SM
Rugged Automatic Alarm Dialer
$
945
Basic Unit
Monitors Four Analog or
Digital Inputs, Individually Selectable
Calls Up to Eight Phone
Numbers on Alarm Condition
Digitally Records Alarm
Messages up to 12 Seconds Long Each
Built-in Surge ProtectionWall Mount or Panel
Mount
Rugged Steel
Construction
The OMA-GUARDIT automatic alarm dialer monitors 4 input channels. Each channel can be configured for an analog or digital signal input. The system utilizes the public telephone network as a basic medium for transmission of alarm messages and status calls. It is field programmable by the user at the system's control panel via a standard touch tone phone handset.
Automatic Alarm Reporting
Upon detection of an alarm condition, OMA-GUARDIT automatically calls a list of up to 8 pre-programmed phone numbers over the standard dial-up telephone network, calling until it gets an acknowledgement. When a connection is made, the system reports the station identity and the specific alarm condition in the form of a digitally pre-recorded voice message. In addition to standard phones in office, plant, or home, the alarm calling sequence can also include calls to pagers, cellular phones, and voice mail.
Local Alarm Relay Output
The OMA-GUARDIT provides a transistor output for TTL or relay drive (500 mA 24 VDC max) activated during unacknowledged
OMA-GUARD IT Alarm Dialer
alarm. This output can be used to activate a local alarm buzzer or light, can be used to remove power to machinery when used with a normally closed relay or activate/ de-activate any device locally when an alarm condition occurs.
Alarm Acknowledgment
An alarm is acknowledged simply by pressing a button on the called phone. When acknowledging an alarm, a built-in microphone permits the caller to listen for background sounds at the site. The user can also call the system from any remote phone for a status report of all points being monitored.
Voice Messaging
The voice transmission consists of a station identification together with an alarm message giving details on the fault. The station identification and alarm messages are digitally recorded by the user. By using electronic voice reporting technology, OMA-GUARDIT eliminates the need for often unreliable audio tape autodialers.
G-5
Set-up and Programming
System set-up, voice recording, and programming is accomplished via an external touch-tone phone which plugs into a standard phone jack on the system’s front panel. The user simply follows voice instructions given over the phone.
System Controls
System operating status is provided by front panel LED indicators. System off/disarm/ready controls are provided on front panel. Surge protection and noise suppression are standard.
A Truly Modern Autodialer
OMA-GUARDIT fills the requirement of a modern autodialer–it should be extremely reliable and be able to tell the called party as much information about the nature of an alarm as possible so that the right personnel can respond quickly and appropriately. Many other autodialers don’t meet these requirements.
Specifications
Extended Warranty
Program
SM
ELECTRICAL Power Requirements: User
supplied 10-14 VDC, 500 mA max. Power Consumption: 200 mA minimum standby 500 mA maximum active Power Failure: Automatic alarm for external power failure Battery Charging: Precision voltage controlled, automatic rapid recharge after drain
UNIVERSAL SIGNAL INPUTS Digital Inputs: Open contacts see
5VDC, closed contacts see 5 mA DC Analog Inputs: 4-20 mA, single ended. Maximum voltage drop 10 VDC.
Resolution: 0.2% Absolute Accuracy: 0.5%
Local Alarm Relay: Transistor
output for TTL or relay drive (500 mA 24 VDC max) activated during unacknowledged alarm.
RJ11-Telephone Line Jack:
For connection to public telephone network
PHYSICAL Surge protection: solid state
protectors on phone, power, and signal lines Enclosure: single circuit card in durable steel cabinet designed for mounting on control panel wall or flush mounted inside a larger control panel with faceplate visible Weight: 4 pounds, 6 pounds with battery
Dimensions:
6.85"H x 8.85"W x 2.85"D
Mounting Centers: 3.6"H x 9"W
ENVIRONMENTAL Temperature Range: 20° to 130°F. Humidity: 0 to 95%,
non-condensing
TELEPHONE
Rotary pulse or tone dialing. Dials up to 8 different numbers, each up to 60 digits long. Time between alarm phone calls programmable
0.1 to 99.9 minutes. Smart calling call progress monitoring detects dial tone, basic ringback and busy signal. Alarm acknowledgement by touch tone key or callback. Compatible with most pager, cellular, and voicemail systems. User-furnished standard touch-tone handset required for programming. FCC Registered.
PROGRAMMlNG
Standard phone jack on front panel for programming phone. Voice menu instructions guide programming.
FACTORY OPTIONS
AC Power Supply, battery backup, internal 6 volt; 4 AH gel cell provides 20 hours operation during power failure. NEMA 4X enclosure.
SPEECH MESSAGES
User digitally records five messages, Station ID and four channel alarm messages. High definition digital recordings up to 12 seconds per message. Resident synthesized voice vocabulary for programming guidance.
OMEGACARESMextended warranty program is available for models shown on this page. Ask your sales representative for full details when placing an order. OMEGACARE labor and equivalent loaners.
SM
AVAILABLE FOR FAST DELIVERY!
To Order
Model Number Price Description
OMA-GUARDIT $945 Rugged automatic alarm dialer with
OMA-GAC 50 AC power supply OMA-GBB 65 Battery backup OMA-GNEMA4X 125 NEMA 4X enclosure
OMA-GUARDIT comes with complete user's manual. OMEGACARESMextended warranty is available for models shown on this page.
Ask your sales representative for full details when placing order.
Ordering Example: OMA-GUARDIT alarm dialer, OMEGACARE
warranty (adds 1 year to 2-year standard warranty), $945 + 94 =
(Specify Model Number)
4 analog/digital inputs
G-6
SM
1-year extended
$1039.
covers parts,
G
Loading...
+ 1 hidden pages