D-x
NEMA MOTOR STARTERS
N101 Series
Starts at
$
329
The Cutler-Hammer®Electro-Mechanical
Starter consists of an electro-mechanical
contact block or contactor and electromechanical solid-state overload relay as a
full voltage non-reversing (FVNR) device.
Size 00 to 2 motor starters are factory
assembled.
l 24 Vdc Control Power—Safe,
Reliable Global Standard
l Unique Pulse Width Modulated
(PWM) Coil Controller Minimizes
Coil Power Consumption
l Microprocessor-Based Control
l Phase Loss and Current
Unbalance Protection,
User Selectable
l Ambient Compensated Overload
l Motor Temperature and Power-Up
Protection with Thermal Memory
l Easily Accessible Mounting
Feet for Panel Mounting
l LED Status Indication—Trip,
Trip Class, Motor Thermal State,
Reset, Overload State
l Unique “Alarm Without Trip”
Option for Critical Must Run
Applications
l -40 to 65°C (-40 to 149°F)
Operating Temperature
l Wide 3.2:1 Current
Adjustment Range
l Exclusive Internal 24-Bit Floating
Point Math Calculations with RMS
Calibrated Current Measurement
l Meets or Exceeds Global
Standards for EMC
(Electromagnetic Compatibility)
Immunity and Emissions
l IP20 Finger Protection
l Motor Running Thermal
Utilization Indication
l Manual, Automatic or
Remote Reset
l DIN Rail Mountable, Size 00 to 2
l Solid-State Alarm Output
Indication
N101BS0G3A, $410, shown
smaller than actual size.
SPECIFICATIONS
Dimensions:
Size 00 and 0: 45 W x 127 H x 63 mm D
(1.8 x 5.0 x 2.5")
Size 1: 54 W x 138 H x 63 mm D
(2.1 x 5.4 x 2.5")
Size 2: 76 W x 150 H x 79 mm D
(3.0 x 5.9 x 3.1")
Mounting Hole Spacing:
Size 00 and 0: 33.8 W x 117.3 mm H
(1.33 x 4.62")
Size 1: 37 W x 128 mm H
(1.46 x 5.04")
Size 2: 24 W x 73 mm H
(0.94 x 2.87")
Weight:
Size 00 and 0: 0.40 kg (0.9 lb)
Size 1: 0.53 kg (1.2 lb)
Size 2: 1.32 kg (2.9 lb)
Mechanical Operating Rate
(No Load Condition):
Size 00 and 0: 3/sec
Size 1: 3/sec
Size 2: 2/sec
Mechanical Life (Operations):
Size 00 and 0: 10,000,000
Size 1: 10,000,000
Size 2: 8,000,000
Humidity: 95% non-condensing
Insulation Voltage (Ui): 690V
Impulse Withstand Voltage (Uimp):
6 kV
Coil Voltage (Nominal): 24 Vdc
Coil Operating Voltage Range:
20 to 28 Vdc
Operating Temperature: -40 to 65°C
(40 to 149°F)
Storage Temperature: -50 to 80°C
(-58 to 176°F)
Shock/Vibration: 15G/5G
Pull-In Time @ 24V—No Debounce:
Size 00 and 0: 15 mS
Size 1: 15 mS
Size 2: 25 mS
Pull-In Time @ 24V—With Debounce:
Size 00 and 0: 75 mS
Size 1: 80 mS
Size 2: 88 mS