⻬ Up to 16 Probes in 1 Fitting
⻬ Blank Sealing Plugs Included
⻬ 3 to 16 Probes
⻬ 416 SS Body and Cap
⻬ 316 SS Ferrules Standard
⻬ PTFE Ferrules Available
⻬ OMEGALOK
Standard
⻬ 1 to 6 mm (0.040 to
Probe Diameters
These all-new multiconductor
feedthroughs are designed for
applications that require several sensors
to pass through a wall or bulkhead at
one opening or within a small area.
Heavy-duty 416 SS construction allows
use of this fitting in high-pressure or
®
Ferrules
1
⁄4")
MFT Series
Starts at
$
73
Optional Male
Threaded Cap
(See Next Page)
vacuum applications. Probes between
0.040" and 1⁄4" in diameter can be used
in these feedthroughs. The maximum
number of probes per feedthrough is
3 for 1⁄4" Dia. probes, 5 for 3⁄16" Dia.,
8 for 1⁄8" Dia., 16 for 1⁄16" Dia., and
16 for 0.040" Dia. probes.
All multiconductor feedthroughs come
standard with stainless steel ferrules. A
stainless steel ferrule deforms and
Cap
Housing
becomes permanent. If the probes have
to be installed several times at different
depths in the feedthrough, PTFE ferrules
should be used. PTFE ferrules will not
deform the probe sheath, which allows
the same probe to be reused. The
ferrules used in the feedthroughs are
identical to the ferrules used in standard
OMEGALOK
Note: All fittings are supplied with stainless steel ferrules. If PTFE ferrules are required,
add suffix “-PTFE” to the model number shown. Add $1 to the cost per ferrule.
One ferrule needed for each conductor.
Male Threaded Cap (Replaces
Standard Cap Locking Nut)—
Standard*
MFTMale
ThreadThreaded Cap
SizeModel No.Price
3
⁄4 NPTFTN-1$25
1
⁄2 NPTFTN-1-1225
1
⁄4 NPTFTN-1-1425
To order metric, add “-BSPT” to model
*
number, no additional charge.
T-TAPE
$
50
3
per Roll
13 mm x 6.6 m
(1⁄2" x 20')
PTFE tape should be used on all pipe
joints to provide a good seal and to
prevent the threaded parts from
seizing each other on disassembly.
Order model T-TAPE.
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.