COMPACT, LOW–COST
SOLID STATE RELAYS (SSR)
G3NE Series
Starts at
$
24
G3NE-210T-US-DC24,
$25, shown actual size.
l Current Ratings to 20 Amps
l Multi-Million Hour Life
l Compatible with Temperature Controllers
l Zero Voltage Switching
l Built-In Varistor Effectively Absorbs
External Surges
l Wide Load Voltage Range: 75 to 264 Vac
l DC Control Signal
l Quick-Connect #110 Input Terminals and
#250 Output Connections
l Thermal Conductive Pad Included
The G3NE Series of low-cost solid state relays are used to control
resistance heaters in conjunction with temperature controllers.
Solid state relays are SPST, normally open switching devices with
no moving parts, capable of millions of hours of operation. By
applying a control signal, an SSR switches ON the AC load current,
just as the moving contacts do on a mechanical relay. Three-phase
loads can be controlled using 2 or 3 SSR’s. Use 3 SSR’s for Y or
star 3-phase loads using a neutral line. Two SSR’s will control
“delta” loads with no neutral line. Three solid state relays are also
used when there is no neutral load to provide redundancy and extra
assurance of control.
“Switching” takes place at the zero voltage crossover point of the
alternating current cycle. Because of this, no appreciable electrical
noise is generated, making SSR’s ideal for environments where
there are apparatuses susceptible to RFI. Models are available with
control voltages of 5, 12, or 24 Vdc.
SPECIFICATIONS
Operate Time:1⁄2 of load power source cycle + 1 mS max
Release Time:1⁄2 of load power source cycle + 1 mS max
Output ON Voltage Drop: 1.6V (RMS) max
Leakage Current: 2 mA max (at 100 Vac), 5 mA max
(at 200 Vac)
Insulation Resistance: 100 MΩ min (at 500 Vdc)
Dielectric Strength: 2000 Vac, 50/60 Hz for 1 min
G3NE-210T-US-DC24,
$25, with Y92B-N50
heat sink, $13,
shown actual size.
Vibration Resistance: Malfunction: 10 to 55, 1.5 mm
double amplitude
Shock Resistance: Malfunction: 1000 m/s
Ambient Temperature:
Operating: -30 to 80°C (-22 to 176ºF) (with no icing
or condensation)
Storage: -30 to 100°C (-22 to 212ºF) (with no icing
or condensation)
Ambient Humidity: Operating, 45 to 85%
Weight: Approx 37 g (1.3 oz)
Certified Standard: UL File No. E64562/CSA File No.
LR35535 TÜV R9051064 (VDE0435) (EN60950)
K-1
2
(approx 100G)
G3NE-205T (L)/210T(L)/220T(L)(-2)-US
Dimensions: mm (in)
Heat Sink
K-2