Omega Products G3NA-210B-AC100-120 User Manual

Page 1
omegamation.com omegamation.com
GENERAL PURPOSE SOLID STATE RELAYS (SSR)
G3NA Series
Starts at
$
20
Current Ratings to 90 Amps
Multi-Million Hour Life
Compatible with Temperature
Controllers
Solid-State, SCR Design
Zero Voltage Switching
(AC Loads)
Built-In Varistor Effectively
Absorbs External Surges
Control AC Loads to 400 Vac
Control DC Loads to 200 Vdc
AC and DC Control Signal Models
LED Operation Indicator
Thermal Conductive Pad Included
The G3N series of solid state relays are used to control large resistance heaters in conjunction with temperature controllers. Solid state relays are SPST, normally open switching devices with no moving parts, capable of millions of hours of operation. By applying a control signal, an SSR switches ON the AC (or DC) load current, just as the moving contacts do on a mechanical relay. Three-phase loads can be controlled using 2 or 3 SSR’s. Use 3 SSR’s for Y or star 3-phase loads using a neutral line. Two SSR’s will control “delta” loads with no neutral line. Three solid state relays are also used when there is no neutral load to provide redundancy and extra assurance of control.
“Switching” takes place at the zero voltage crossover point of the alternating current cycle. Because of this, no appreciable electrical noise is generated, making SSR’s ideal for environments where there are apparatuses susceptible to RFI.
50
G3NA-240B-DC5-24,
$45, shown actual size.
SPECIFICATIONS
Operate Time:
G3NA-205B, G3NA-210B, G3NA-220B, G3NA-240B, G3NA-420B, G3NA-440B, G3NA-450B:1⁄2 of load power source
cycle + 1 mS max (DC input), 3⁄2 of load power source cycle + 1 mS max (AC input) G3NA-D210B: 1 mS max (DC input), 30 mS max (AC input)
Release Time:
G3NA-205B, G3NA-210B, G3NA-220B, G3NA-240B, G3NA-420B, G3NA-440B, G3NA-450B:1⁄2 of load power source
cycle + 1 mS max (DC input), 3⁄2 of load power source cycle + 1 mS max (AC input) G3NA-D210B: 5 mS max (DC input), 30 mS max (AC input)
Output ON Voltage Drop:
G3NA-205B, G3NA-210B, G3NA-220B, G3NA-240B:
1.6 V (RMS) max
G3NA-420B, G3NA-440B, G3NA-450B: 1.8 V (RMS) max G3NA-D210B: 1.5 V max
Leakage Current:
G3NA-205B, G3NA-210B, G3NA-220B, G3NA-240B: 5 mA max
(@ 100 Vac), 10 mA max (@ 200 Vac)
Leakage Current Cont:
G3NA-420B, G3NA-440B, G3NA-450B: 10 mA max (@ 200 Vac)
20 mA max (@ 400 Vac)
G3NA-D210B: 5 mA max (@ 200 Vdc)
Insulation Resistance: 100 M min
(@ 500 Vdc) Dielectric Strength: 2500 Vac,
50/60 Hz for 1 min Vibration Resistance: Destruction;
10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock Resistance: Destruction; 1000 m/s
Ambient Temperature:
Ambient Humidity: Operating, 45 to 85% Weight:
2
Operating: -30 to 80°C (-22 to 176ºF) (with no icing or condensation) Storage: -30 to 100°C (-22 to 212ºF) (with no icing or condensation)
G3NA-205B, G3NA-210B, G3NA-220B: Approx 60 g G3NA-240B, G3NA-D210B: Approx 70 g G3NA-420B, G3NA-440B, G3NA-450B: Approx 80 g
SHOP
ONLINE AT
To download information and to order automation products online, visit omegamation.com
1
Page 2
1-888-55-663421-888-55-66342
1-888-55-OMEGA1-888-55-OMEGA
TM
HOTLINE TO
AUTOMATION
PRODUCTS
12
34
((−)) (+)(+)
4.5 (0.17) 25
(0.98)
Load
4.5 dia
(0.17)
dia
43 (1.69)
max
Terminal Arrangement/ Internal Connections (Top View)
11.9
(0.47)
58
(2.28)
max
47.5
(1.87)
44
(1.73)
Four, M4 x 8 screws
Operating
Indicator
Height will be 30 mm for all G3NA-420B (-UTU) models manufactured after July 1, 2010
15.8 (0.62)
25 (0.98) max 27 (1.06)
47.6
(1.87)
±0.2
Two, 4.3 dia or M4 holes
Mounting Holes
Output
Input
Load
power
supply
Load
12
34
()(+)
Mounting Holes
Terminal Arrangement/ Internal Connections (Top View)
4.5 (0.17) 25
(0.98)
4.5 dia (0.17)
dia
43 (1.69)
max
11.9
(0.47)
58
(2.28)
max
47.5
(1.87)
44
(1.73)
Two, M5 x 12 screws
Operating
Indicator
Height will be 30 mm for all G3NA-240B/2500B (-UTU) models manufactured after July 1, 2010
47.6
(1.87)
±0.2
Two, 4.3 dia or M4 holes
Output
Load
power
supply
Two, M4 x8 screws
15.8 (0.62)
25 (0.98) max 27 (1.06) max
Input
Load
12
34
(−) (+)
+
Mounting Holes
Terminal Arrangement/ Internal Connections (Top View)
4.5 (0.17) 25
(0.98)
4.5 dia (0.17)
dia
43 (1.69)
max
11.9
(0.47)
58
(2.28)
max
47.5
(1.87)
44
(1.73)
Four, M4 x 8 screws
Operating
Indicator
47.6
(1.87)
±0.2
Two, 4.3 dia or M4 holes
Output
Load
power
supply
15.8 (0.62)
25 (0.98) max 27 (1.06) max
Input
Note: When connecting the load,
either the positive or negative side of the load terminals can be connected.
Note: The load can be connected to either the positive or negative side.
G3NA-205B, G3NA-210B, G3NA-220B, G3NA-420B
G3NA-240B, G3NA-440B
2
omegamation.com for new details!
G3NA-D210B
Relays and timers product line
continues to expand, visit
Page 3
omegamation.com omegamation.com
5.6 (0.2)
47.6 (1.9) 5
(0.2)
4.5
(0.2)
6 (0.2)
Mounting Holes
4.6 (0.2) dia.
47 (1.9) max
Two, M3
holes
Two, M4
holes
30.5 (1.2) ±0.3
35
(1.4)
77 (3) max
90 (3.5) ±0.3
100 (3.9) max
Two, 3.2 (0.1) dia holes
44
(1.7)
max
30
(1.2)
51 (2)
max
Two, 4.4 (0.2) dia
or M4 holes
90
(3.5)
±0.4
35 (1.4)
±0.2
Weight approx 200 g (7.05 oz)
5.6 (0.2)
Mounting Holes
4.6 (0.2) dia.
Two, M3
holes
Two, M4
holes
30.5 (1.2) ±0.3
Two, 3.2 (0.1) dia holes
Two, 4.4 (0.2) dia
or M4 holes
35 (1.4)
±0.2
Weight approx 400 g (14.1 oz)
35
(1.4)
47.6 (1.9)
77 (3) max
90 (3.5) ±0.3
100 (3.9) max
71 (2.8) max
30
(1.2)
28
(1.1)
5 (0.2)
100 (3.9) max
13
(0.5)
4.5
(0.2)
75 (3.0) max
90 (3.5) ±0.4
5.6 (0.2)
4.6
(0.2)
dia.
Two, 4.4 (0.2) dia
or M4 holes
35 (1.4)
±0.2
Weight approx 560 g (19.7 oz)
47.6 (1.9)
28
(1.1)
5 (0.2)
4.5
(0.2)
30
(1.2)
Mounting Holes
Three, M4 holes
35
(1.4)
77 (3) max
90 (3.5) ±0.3
100 (3.9) max
56
(2.2) ±0.3
100 (3.9) max
104 (4.1) max
100 (3.9) max
13
(0.5)
90 (3.5) ±0.4
Y92B-N150 Heat Sink for the G3NA-240B, G3NA-440B, G3NE-625B.
For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs). The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting hole dimensions. If using Y92B-N150 as heat sink for relay, maximum recommended current is 25 A.
Y92B-N100 Heat Sink for the G3NA-220B, G3NA-420B, G3NE-220T(L).
For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs). The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting hole dimensions.
Y92B-N50 Heat Sink for the G3NA-205B, G3NA-210B, G3NA-D210B, G3NE-210T(L).
For surface mounting, a 30% derating of the load current is required (from the load current vs. ambient temperature graphs). The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the mounting holes dimensions.
HEAT SINKS
SHOP
ONLINE AT
To download information and
to order automation products
online, visit omegamation.com
3
Page 4
1-888-55-663421-888-55-66342
1-888-55-OMEGA1-888-55-OMEGA
TM
HOTLINE TO
AUTOMATION
PRODUCTS
Ambient Temperature (Cº)
Load Current (A)
6
5
4
3
2
15
1
0
With standard heat sink (Y92B-N50) or aluminum plate measuring 75 W x 75 H x t3.2 mm (2.95 x 2.95 x 0.12")
Without heat sink
30200
20
40
60 80
100
Ambient Temperature (Cº)
Load Current (A)
With standard heat sink (Y92B-N50) or aluminum plate measuring 150 W x 150 H x t3.2 mm (5.90 x 5.90 x 0.12")
Without heat sink
30200
20
40
60 80
100
With iron plate measuring 100 W x 100 H x 0.8 mm (3.94 x 3.94 x 0.03")
20 16
10
8
6 5
4
2
0
Load Current (A)
With standard heat sink (Y92B-N100) or aluminum plate measuring 200 W x 200 H x t3.2 mm (7.87 x 7.87 x 0.12")
Without heat sink
30200
20
40
60 80
100
25
20
15
10
8 6
5 4
2 0
With iron plate measuring 100 W x 100 H x 0.8 mm (3.94 x 3.94 x 0.03")
Ambient Temperature (Cº)
Load Current (A)
With standard heat sink (Y92B-N150)
Without heat sink
30200
20
40
60 80
100
With iron plate measuring 100 W x 100 H x t0.8 mm (3.94 x 3.94 x 0.03")
50 45
40
30
20
12 10
6
4 2 0
Ambient Temperature (Cº)
Load Current (A)
With standard heat sink (Y92B-N150)
With (Y92B-A250 or heat sink with a radiation efficiency of 1ºC/W
Without heat sink
30200
20
40
60 80
100
With iron plate measuring 100 W x 100 H x t0.8 mm (3.94 x 3.94 x 0.03")
50 45
40
30
20
12
10
6
4
2
0
Load Current (A)
With standard heat sink (Y92B-P250)
Without heat sink
30200
20
40
60 80
100
60
50
40
30
20
10
6
0
Ambient Temperature (Cº)
Load Current (A)
With standard heat sink (Y92B-N50) or aluminum plate measuring 150 W x 150 H x t3.2 mm (5.90 x 5.90 x 0.12")
30200
20
40
60 80
100
Without heat sink
With iron plate measuring 100 W x 100 H x 0.8 mm (3.94 x 3.94 x 0.03")
20
10
6 5 4
2
0
LOAD CURRENT VS. AMBIENT TEMPERATURE
4
Relays and timers product line
continues to expand, visit
omegamation.com for new details!
G3NA-240B-DC5-24,
$45, shown actual size.
Page 5
omegamation.com omegamation.com
RATINGS INPUT (AT AN AMBIENT TEMPERATURE OF 25°C)
MODEL NO. VOLTAGE VOLTAGE IMPEDANCE
G3NA-2xxB
G3NA-4xxB 5 to 24 Vdc 4 to 32 Vdc 5 mA max G3NA-D210B 100 to 240 Vac 75 to 264 Vac 72 k ±20% 75 Vac max 20 Vac min
RATED OPERATING
5 to 24 Vdc 4 to 32 Vdc 7 mA max 100 to 120 Vac 75 to 132 Vac 36 k ±20% 75 Vac max 20 Vac min 200 to 240 Vac 150 to 264 Vac 72 k ±20% 150 Vac max 40 Vac min
1
2
2
MUST OPERATE MUST RELEASE
VOLTAGE VOLTAGE
VOLTAGE LEVEL
4 Vdc max 1 Vdc min
4 Vdc max 1 Vdc min
OUTPUT
APPLICABLE LOAD
LOAD CURRENT
MODEL NO. VOLTAGE RANGE WITH HEAT SINK2W/OUT HEAT SINK INRUSH CURRENT
G3NA-205B G3NA-210B 0.1 to 10 A (at 40°C) 0.1 to 4 A (at 40°C) 150 A (60 Hz, 1 cycle) G3NA-220B 24 to 240 Vac 19 to 264 Vac 0.1 to 20 A (at 40°C) 0.1 to 4 A (at 40°C) G3NA-420B 200 to 480 Vac 180 to 528 Vac 0.2 to 20 A (at 40°C) 0.2 to 4 A (at 40°C) G3NA-240B 24 to 240 Vac 19 to 264 Vac 0.1 to 40 A (at 40°C) 0.1 to 6 A (at 40°C) G3NA-440B 200 to 480 Vac 180 to 528 Vac 0.2 to 40 A (at 40°C) 0.2 to 6 A (at 40°C) G3NA-450B 200 to 480 Vac 180 to 528 Vac 0.2 to 50 A (at 40°C) 0.2 to 6 A (at 40°C) G3NA-D210B 5 to 200 Vdc 4 to 220 Vdc 0.1 to 10 A (at 40°C) 0.1 to 4 A (at 40°C) 20 A (10 ms)
Notes: 1The input impedance is measured at the maximum value of the rated supply voltage (for example, with the model rated at
100 to 120 Vac, the input impedance is measured at 120 Vac).
2
With constant current input circuit system.
RATED LOAD LOAD VOLTAGE
24 to 240 Vac 19 to 264 Vac
0.1 to 5 A (at 40°C) 0.1 to 3 A (at 40°C) 60 A (60 Hz, 1 cycle)
1
220 A (60 Hz, 1 cycle)
440 A (60 Hz, 1 cycle)
To Order (Specify Model Number)
MODEL NO. PRICE DESCRIPTION
G3NA-205B-DC5-24 $20.50 200 Vac load, 5A, DC control voltage (5 to 24 Vdc) G3NA-210B-DC5-24 21.00 200 Vac load, 10A, DC control voltage (5 to 24 Vdc) G3NA-225B-DC5-24 27.50 200 Vac load, 25A, DC control voltage (5 to 24 Vdc) G3NA-240B-DC5-24 45.00 200 Vac load, 40A, DC control voltage (5 to 24 Vdc) G3NA-420B-DC5-24 61.00 400 Vac load, 20A, DC control voltage (5 to 24 Vdc) G3NA-440B-DC5-24 81.00 400 Vac load, 40A, DC control voltage (5 to 24 Vdc) G3NA-450B-DC5-24 87.00 400 Vac load, 50A, DC control voltage (5 to 24 Vdc) G3NA-D210B-DC5-24 43.50 200 Vdc load, 10A, DC control voltage (5 to 24 Vdc) G3NA-210B-AC100-120 41.00 200 Vac load, 10A, AC control voltage (100 to 120 Vac) G3NA-210B-AC200-240 26.50 200 Vac load, 10A, AC control voltage (200 to 240 Vac) G3NA-220B-AC100-120 31.50 200 Vac load, 20A, AC control voltage (100 to 120 Vac) G3NA-220B-AC200-240 31.50 200 Vac load, 20A, AC control voltage (200 to 240 Vac) G3NA-225B-AC100-120 34.50 200 Vac load, 25A, AC control voltage (100 to 120 Vac) G3NA-225B-AC200-240 34.50 200 Vac load, 25A, AC control voltage (200 to 240 Vac) G3NA-240B-AC100-120 50.00 200 Vac load, 40A, AC control voltage (100 to 120 Vac) G3NA-240B-AC200-240 51.00 200 Vac load, 40A, AC control voltage (200 to 240 Vac) G3NA-440B-AC100-240 91.00 400 Vac load, 40A, AC control voltage (100 to 240 Vac)
MOST POPULAR MODELS HIGHLIGHTED!
HEAT SINKS, DIN RAIL OR PANEL MOUNTING OPTION
MODEL NO. PRICE DESCRIPTION
Y92B-N50 $13 Heat sink for 5A and 10A SSRs Y92B-N100 20 Heat sink for 20A SSRs Y92B-N150 26 Heat sink for 25A and 40A SSRs Y92B-P250 68 Heat sink for 50A SSRs
Ordering Example: G3NA-205B-DC5-24, SSR for AC load, 5A, DC control voltage, and Y92B-N50, heat sink, $20.50 + 13 = $33.50.
SHOP
ONLINE AT
To download information and
to order automation products
online, visit omegamation.com
5
Page 6
One Omega Drive | Stamford, CT 06907 | 1-888-TC-OMEGA (1-888-826-6342) | info@omega.com
EPG05
www.omega.com
UNITED KINGDOM
www. omega.co.uk
Manchester, England
0800-488-488
UNITED STATES
www.omega.com
1-800-TC-OMEGA
Stamford, CT.
CANADA
www.omega.ca
Laval(Quebec)
1-800-TC-OMEGA
GERMANY
www.omega.de
Deckenpfronn, Germany
0800-8266342
Karviná, Czech Republic
FRANCE
www.omega.fr
Guyancourt, France
088-466-342
CZECH REPUBLIC
www.omegaeng.cz
596-311-899
BENELUX
www.omega.nl
Amstelveen, NL
0800-099-33-44
More than 100,000 Products Available!
Temperature
Calibrators, Connectors, General Test and Measurement Instruments, Glass Bulb Thermometers, Handheld Instruments for Temperature Measurement, Ice Point References, Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders Relative Humidity Measurement Instruments, RTD Probes, Elements and Assemblies, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching Devices, Thermistor Elements, Probes and Assemblies,Thermocouples Thermowells and Head and Well Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level Measurement, Magnetic Flowmeters, Mass Flowmeters, Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen Instrumentation, Environmental Instrumentation, pH Electrodes and Instruments, Water and Soil Analysis Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems, Communication Products and Converters, Data Acquisition and Analysis Software, Data Loggers Plug-in Cards, Signal Conditioners, USB, RS232, RS485 and Parallel Port Data Acquisition Systems, Wireless Transmitters and Receivers
Pressure, Strain and Force
Displacement Transducers, Dynamic Measurement Force Sensors, Instrumentation for Pressure and Strain Measurements, Load Cells, Pressure Gauges, Pressure Reference Section, Pressure Switches, Pressure Transducers, Proximity Transducers, Regulators, Strain Gages, Torque Transducers, Valves
Heaters
Band Heaters, Cartridge Heaters, Circulation Heaters, Comfort Heaters, Controllers, Meters and Switching Devices, Flexible Heaters, General Test and Measurement Instruments, Heater Hook-up Wire, Heating Cable Systems, Immersion Heaters, Process Air and Duct, Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...