Omega Products FPB1402 User Manual

PLASTIC PADDLEWHEEL
FLOWMETERS

FPB1400 Series

U Easy to Install and Operate
U Mounts in Any Direction
U Only One Moving Part
U Visual Flow Indication
U Female NPT Ports
U Polypropylene or

PVDF Models

FPB1406-RTD shown smaller than actual size.

Fluid flowing through the FPB1400
causes the paddlewheel to spin.
As the magnets embedded in
the paddle spin past the sensor,
electrical pulses are produced in
which frequency is proportional to
the flow rate. The number of pulses
per desired time interval and the
K‑factor (number of pulses/gallon)
make it is easy to calculate the flow
rate and volume passing through
the unit.

SPECIFICATIONS

Accuracy: ±1% FS
Maximum Temperature: 60°C (140°F)
Maximum Pressure: 10 bar (150 psig)
Power: 5 to 24 Vdc @ 2 mA
Output Signal: NPN open collector

(load 30 mA maximum)
Body Dimensions:

56 H x 108 L x 53 mm D
(2.2 x 4.25 x 2.2")

To Order

Maximum Difference Range
Model No. Description Model No. with RTD Ports NPT Pressure bar (psi) GPM

FPB1402 Polypropylene flowmeter FPB1402-RTD ³⁄₈ 1 (15) 0.5 to 5
FPB1404 Polypropylene flowmeter FPB1404-RTD
FPB1406 Polypropylene flowmeter FPB1406-RTD
FPB1408 Polypropylene flowmeter FPB1408-RTD 1 1.4 (20) 3.5 to 35
FPB1412 PVDF flowmeter FPB1412-RTD
FPB1414 PVDF flowmeter FPB1414-RTD
FPB1416 PVDF flowmeter FPB1416-RTD
FPB1418 PVDF flowmeter FPB1418-RTD 1 1.4 (20) 3.5 to 35

Accessory

DPF701 ¹⁄₈ DIN digital display, 115 Vac 7.5 to 13 Vdc powered

Comes complete with operator’s manual.

Ordering Example: FPB1408, polypropylene flowmeter with DPF701, digital display meter.
FPB1406-RTD, polypropylene flowmeter with RTD temperature sensor and DPF701, digital display meter.

Visit omega.com/fpb1400 for Pricing and Details

Cable: Flow 1.8 m (6'), RTD 0.3 m (1')
(‑RTD models)

RTD: Platinum 0.00385 TCR, meets
EN 60751, Class B (‑RTD models)

Maximum Pressure Drop: 15 psi on
size 2 units 20 psi on all other sizes

Viscosity: Calibrated 1 cSt, up to
50 cSt with field calibration

Response Time: At 1 sec 10 to 90%
of full scale, at 2 sec below 10% of
full scale

Wetted Materials
Polypropylene Models

Body: Polypropylene
LID: Acrylic
Paddlewheel: PVDF
Shaft: Nickel tungsten carbide
Bearings: Sapphire jewels
O-Rings: EPDM
RTD: 316 SS casing

F-1

PVDF Models

Body: PVDF
LID: PVDF
Paddlewheel: PVDF
Shaft: Zirconia ceramic
Bearings: Sapphire jewels

O-Rings: PTFE
RTD: 316 SS casing (‑RTD models)

DPF701 smaller than actual size.
Visit omega.com/dpf701

¹⁄₂ 1.4 (20) 1 to 10
³⁄₄ 1.4 (20) 2 to 20

³⁄₈ 1 (15) 0.5 to 5
¹⁄₂ 1.4 (20) 1 to 10
³⁄₄ 1.4 (20) 2 to 20

F