Omega Products FOBS-2 User Manual
Portable Fiber Optic
Data Logger Thermometer
HTFO-101
H
$
2695
⻬
Battery Operated (Included)
⻬ Data Logging on
SD Cards (SD Card
Sold Separately)
⻬
-80 to 300°C (-112 to 572°F)
Range
⻬ RS232 Com Link
⻬ Optional Windows
Software
⻬ Large LCD Display
⻬ No Gage Factor or
Calibration
⻬ Accuracy of ±0.5°C
®
HHTFO-101, $2695,
shown smaller than
actual size.
Applications
⻬ High Voltage
Environments
⻬ EMI, RFI and Microwave
Environments
⻬ Microwave and Food
Processing
⻬
Hazardous Environments
⻬ Civil Engineering
and Geotechnical
The HHTFO-101 offers impressive
versatility. Battery operated for
maximum user freedom, this
single-channel instrument allows
you to freely move from one area to
another to measure temperatures
at various critical sensing points.
The HHTFO-101 runs on standard
“AA” type alkaline or rechargeable
batteries, providing power for at
least 5 hours of continuous use.
It also comes with a universal
power supply.
The HHTFO-101 comes with a
built-in flash card data logging
feature allowing user to save
collected data directly onto a high
capacity SD flash card. SD cards of
up to 1 GB capacity are supported.
The data can be accessed through
any PC equipped with a flash card
reader. The HHTFO-101 also
features the SnapLog feature which
allows recording of 1 temperature
point with time stamp every time
the SnapLog key is pressed.
The HHTFO-101 features a
160 x 160 pixel LCD display
with a LED backlight. It provides
celsius or fahrenheit temperature
readings that are well contrasted
in any condition.
L-13
The HHTFO-101 icon-driven user
interface is built around a 6-button
ruggedized keypad. All functions
are accessible through the display
menu, including data logging on
SD card, instrument setup and
configuration, and expert mode.
Data logging sessions can also be
viewed directly on the display.
This multi-purpose instrument
comes with a built-in RS232
ort for remote interfacing.
p
The instrument is a perfect match
with the optional FOB100-SOFT
software. Software features include
min/max alarm, full data logging
functions, and bar-graph, trend-line,
or statistics display. Moreover,
ll system features are accessible
a
through ASCII commands,
facilitating the development of
custom routines or proprietary
drivers by users.
The HHTFO-101 is a valuable
monitoring tool for a wide range of
applications in energy, industrial
and research activities, such as hot
spot monitoring inside power
transformers during manufacturing
and heat runs. It can also be used
in various high voltage applications
and MW/RF heating applications.
Its accuracy and high degree of
sensitivity to temperature changes
makes it a natural choice for a
wide variety of applications.
The field-proven sensors are
interchangeable and no calibration
or inconvenient gage factors are
required when changing sensors.
The HHTFO-101 comes with a
complete 1-year warranty.
Specifications
Number of Channels:
Single-channel instrument
Resolution: 0.1°C (0.1°F)
Accuracy: ±0.5°C (0.9°F) or 1% FS
Sampling Rate: 5 Hz
Upgradeability—Firmware:
Flash ROM upgradeable through
serial communication
Display: 53 x 53 mm (3" diagonal)
graphic matrix display, 160 x 160 pixels,
transflective display, yellow-green
LED backlight
Units: User selectable,
metric or imperial
Data Logging Memory:
Temperature plus time and date stamp
in ASCII format on removable SD
flash card
Data Logging Rate: Logging
sessions with user selectable rate
from 1 sec to 1-hr
SnapLog™ Feature: Save 1 data
point logging and time stamp when
SnapLog key is pressed
Temperature Measurement
Range: -80 to 300°C (-112 to 572°F)
onnectors:
ommunication And I/O
C
Operating Mode: Front panel keypad,
FOB100-50FT Windows software or
RS232 ASCII commands
Communication (Hardware):
RS232
Communication protocols:
SCII (over RS232)
A
Mechanical and Environmental
Operating Temperature:
-20 to 55°C (0 to 150°F)
Storage Temperature: -30 to 70°C
(0 to 160°F), non-condensing
Form Factor: Handheld unit, anodized
aluminum extrusion and heavy-duty diecast top and bottom
end caps painted with textured black
powder paint (RAL 9005)
Enclosure Protection:
IP54 standard
Recommended Reference Book: Microwave Engineering,
Second Edition, EE-2470, $111.
See Section Y For Additional Books
C
Optical:
connector
erial:
S
1 ST
DB-9
Power-In:
Power jack
connector
SD Card: Push-to-eject
card slot on top panel
Batteries: Battery access port
on bottom side
Dimensions:
180 H x 118 W x 37 mm D
(7 x 4.6 x 1.4")
Weight: 5
without batteries
50 g (1.2 lb),
Power
Power Requirements: 6 Vdc
power-in or 4 “AA” alkaline (included)
or rechargeable batteries
Power Consumption: 1.25 W
HHTFO-101, $2695, with HHTFO-101-EC
protective end caps and shoulder strap,
$95, shown smaller than actual size.
AVAILABLE FOR FAST DELIVERY!
To Order (Specify Model Number)
Model No. Price Description
HHTFO-101 $2695 Fiber optic thermometer
FOBS-2 249
FOBS-10 377
FOBS-20 537
FOBS-30 697
Accessories Price Description
FOB100-SOFT $395 Windows software and RS232 cable
HHTFO-101-WM 275 Wall mount
HHTFO-101-EC 95 Protective end caps and shoulder strap
1GB-SD 29 SD memory card, 1 GB
OS-XL-FCR 39 USB flash card reader
Higher temperature probes are available. Contact sales department and specify cable length
and temperature range from -80 up to 300°C.
Comes with universal charger, 4 “AA” NiMH batteries, and operator’s manual.
Ordering Example: HHTFO-101, 1-channel handheld fiber optic thermometer,
FOBS-2, 2 m (6.6') cable temperature sensor, 1GB-SD, 1 GB SD flash card,
$2695 + 249 + 29 = $2973.
Sensor with 2 m (6.6') cable, -80 to 250°C (-112 to 482°F) range
Sensor with 10 m (33') cable, -80 to 250°C (-112 to 482°F) range
Sensor with 20 m (66') cable, -80 to 250°C (-112 to 482°F) range
Sensor with 30 m (98') cable, -80 to 250°C (-112 to 482°F) range
L-14
L
Loading...