Omega Products FOB101 User Manual

Fiber Optic Thermometer

FOB102 shown larger than actual size.

FOB100 Series

Standard

U NIST Certiﬁcate Included U 1, 2, or 4 Channels U Large Display U No Calibration Required U Voltage or Current Output U RS232 or Optional

Software Available

U Ideal for Microwave-Type

Applications

The FOB100 Series comprises high-accuracy, multipurpose ﬁber optic thermometers with 1, 2, or 4 channels. They use an original algorithm to analyze incoming signals, measuring the temperature on each channel.

The standard analog output is 0 to 10V; 4 to 20 mA is optional. Sensors are sold separately in various cable lengths (see To Order chart, next page), are interchangeable, and do not require calibration.

With the optional FOB100-SOFT software for Windows

(see Accessories chart, next page), the user can download data to a PC via the RS232 communications port on the front panel. Software features include min/max alarm; full data logging functions; and bar-graph, trend-line, or statistics display.

The FOB100’s rugged enclosure and immunity to EMI/RFI interference make it ideal for demanding industrial and laboratory applications.

Speciﬁcations

Number of Channels: 1, 2 or 4 Resolution: 0.1°C (0.2°F) Precision: ±0.8°C (1.6°F) or 1% FS Response Time:

Single-Channel Version: 10 Hz sampling rate 2- and 4-Channel Versions: 250 ms switching rate between each channel

Operating Temperature: 0 to 50°C (32 to 122°F)

Storage Temperature: -20 to 60°C (-4 to 140°F)

Display: VFD, 2 lines x 16 characters Communication Port: RS232 Operating Mode: Front panel,

FOB100-SOFT PC software (optional) or RS232 commands

Analog Outputs: 120 to 240 Vac, 50/60 Hz AC adaptor Standard: 0 to 10V (4) Optional: 4 to 20 mA

Power: 18 to 24 Vdc, 8 W (included)

FOBS-2 sensor with 2 m (6.6') cable

ø = diameter

Silicone

Tip

Ø 400 microns Sensitive Area

Ø 1.15 mm PTFE

2 m (6.6') standard

ST Connector

9.5 mm 1.15 mm

M-97

Dimensions:

141.4 W x 64.0 H x 227.3 mm L (5.57 x 2.52 x 8.95")

Weight: 1.2 kg (2.6 lb)

Probe Speciﬁcations

Temperature Range:

-80 to 250°C (-112 to 482°F); cryogenic range available (down to 5 Kelvins)

Resolution: 0.1°C (0.2°F) Accuracy: ±1°C or 1% FS Response Time: 250 ms or faster

FOB100 Series Thermometer Dimensions

FRONT

FIBER OPTIC TEMPERATURE SENSOR

CH1

FNC

POWER

OFF

RS-232 SENSOR

Tx Rx 1 2 3 4

CH2

CH4 CH3

FOB102 shown actual size.

BACK

1 2 3 4

ANALOG OUTPUTS

1 2 3 4

-+-+-+-+

4-20 mA

0-10V

MADE IN CANADA

114 (4.5)

PRODUCT NO. / SERIAL NO.

NEOPTIX INC.

WWW.NEOPTIX.COM

POWER

18-24 Vdc, 500 mA

SIDE

Dimensions: mm (inch)

227.3 (9)

To Order Visit omega.com/fob100 for Pricing and Details

Model No. Description FOB101 1-channel ﬁber optic benchtop thermometer FOB102 2-channel ﬁber optic benchtop thermometer FOB104 4-channel ﬁber optic benchtop thermometer Model No. Required Sensors FOBS-2 Sensor with 2 m (6.6') cable FOBS-10 Sensor with 10 m (33') cable FOBS-20 Sensor with 20 m (66') cable FOBS-30 Sensor with 30 m (98') cable**

Note: For corrosive environments, add “-PTFE” to the model number for an additional cost.

Accessories

Model No. Description

FOB100-SOFT Windows software FOBS-CAB-(*) Polyurethane, sensor extension cable, 2 m (6.6')

Add number of meters. Each additional meter over 2 m, there will be an additional cost.

Maximum available cable length is 30 m (98').

Comes complete with operator’s manual, NIST certiﬁcate, and 100 to 240 Vac, 50/60 Hz AC adaptor. To change the 0 to 10V output to a 4 to 20 mA output, add “-PV” to the model number, no additional cost. Ordering Example: FOB101, 1-channel benchtop ﬁber optic thermometer, and FOBS-2, 2 m (6.6') cable temperature sensor.

64 (2.5)

M-98