Omega Products DPF11 User Manual

1
8 DIN BATCH CONTROLLER
for Amplified Frequency Inputs
DPF11
U 5-Digit Scaling Factor U Display Rate, Batch
Size and Batch/Total or Grand Total
U Second B Relay
Programmable for Output at Prewarn or Selected Batch/Grand Total
U Security Lockout U NEMA 4X (IP65) Front U Optional RS422 or RS232 U Analog Output Available
The DPF11 miniature batcher is ideal for all batching applications. The display will show batch amount, rate and batch/grand total at the push of a button. The start and stop buttons make batching simple.
The DPF11 is a 6-digit totalizer and
4.5 digit ratemeter with two relay outputs. One output is dedicated to the batch amount (preset A), the other can be activated for prewarn or batch/grand total. The unit can count up to the preset (reset to 0) or down from the preset (set to preset). start, stop and reset functions can be activated from the front panel or remote inputs.
An analog output (assignable for rate or batch amount) is optional for data logging.
Up to 99 units can communicate to a host computer on a single RS232 or RS422 loop.
SPECIFICATIONS
Accuracy: 0.01% FS (±1 display digit) Display: 6-digit, 13.97 mm (0.55") high
LED (±1 display digit) Input Power: 110 Vac ±15%,
220 Vac ±15%, 24 Vac ±15%
Current: 250 mA dc max or 6.5 VA AC Output Power: (AC powered units only)
12 Vdc @ 50 mA, unregulated -10 +50%
Temperature: Operating: 0 to 54°C (32 to 130°F) Storage: -40 to 93°C (-40 to 200°F)
Humidity: 0 to 90% RH, non-condensing Memory: EEPROM stores data for
10 years if power is lost
Approvals: CE approved Pulse Input:
Low: 0 to 1 Vdc High: 4 to 30 Vdc 10 kΩ impedance, up to 10 kHz; min 0.05 Hz for rate indication
Mag. Input: 30 mV input, (50V max) signals 10 kΩ imp. 5 kHz max
Output Relays: (2) rated 5 A, 120/240 Vac or 28 Vdc (NC relay contacts and NPN transistor output available with solder jumpers)
To Order Visit omega.com/dpf11_12 for Pricing and Details
Model No. Description
DPF11 4/30V pulse input (FLSC-AMP-A may be needed) DPF12 Low level MAG. input (No FLSC-AMP-A required)
Options
Ordering Suffix Description
-A Analog output, 0 or 4 to 20 mA proportional to rate/total*
-220VAC 220 Vac power
-24VAC 24 Vac power
-RS232 RS232 communications*
-RS422 RS422 communications*
“-A”, “-RS232” and “-RS422” options are mutually exclusive. Only one may be ordered
*
with a unit.
Accessories
Model No. Description DPP-5 ¹⁄₈ DIN panel punch FLSC-AMP-A Amplifies low-level turbine and paddlewheel sensors
Comes complete with operator’s manual.
Ordering Examples: DPF11-RS232 is a ratemeter/batch controller with RS232 output, OCW-3 OMEGACARESM extends standard 2-year warranty to a total of 5 years.
DPF12-A, ratemeter/batcher with 4 to 20 mA output.
DPF11
1
8 DIN shown actual size.
M-23
Panel Cutout:
92 W x 45 H x 108 mm D (3.622 x 1.772 x 4.245")
Dimensions: 113 W x 67 H x 126 mm D (4.44 x 2.63 x 4.95")
Shipping Weight: 9 kg (2 lb)
Extended Warranty
OMEGACARE is available for models shown on this page. Ask your sales representative for full details when placing an order. OMEGACARESM covers parts, labor and equivalent loaners.
SM
extended warranty program
Program
SM
Loading...