M-60
M
To Order
(Specify Model Number)
Model No. Price Description (Display Meter Only, No Outputs)
DP63700-AC $317 AC inputs, red display, 85 to 250 Vac, 50/60 Hz
DP63700-AC-GN 334 AC inputs, green display, 85 to 250 Vac, 50/60 Hz
DPP-5 525
1
⁄
8 DIN panel punch
EE-1319 85 Reference Book: Grounding and Shielding Techniques
Optional Plug-in Output Cards (Field Installable)
*
Free DP6-SOFT software download available at omega.com/dp63700.
Comes complete with operator’s manual.
Note: Adding option cards—meters can be fitted with up to 3 optional plug-in cards, however, only 1 card from each function type can be
installed at a time. The function types include setpoint alarms, analog output and communications. The cards can be installed initially or at a
later date. Each optional plug-in card is shipped with installation and programming instructions.
Ordering Example: DP63700-AC, AC inputs, red display, 85 to 250 Vac, 50/60 Hz, LDP6-CDC20, RS232 serial communications output card
with terminal block, $317 + 48 = $365.
Dimensions: mm (in)
Model No. Price Description
Setpoint Alarms (Only 1 Alarm Card Can Be Installed Into Base Meter)
LDP6-CDS10 $37 Dual setpoint relay output card
LDP6-CDS20 37 Quad setpoint relay output card
LDP6-CDS30 37 Quad setpoint sinking open collector output card
LDP6-CDS40 37 Quad setpoint sourcing open collector output card
Analog Output
LDP6-CDL10 $74 Analog output card
Communications (Only 1 Communications Card Can Be Installed Into Base Meter)*
LDP6-CDC10 $48 RS485 serial communications output card with terminal block
LDP6-CDC1C 48 Extended RS485 serial communications output card with dual RJ11 connector
LDP6-CDC20 48 RS232 serial communications output card with terminal block
LDP6-CDC2C 48 Extended RS232 serial communications output card with 9-Pin D connector
LDP6-CDC40 58 MODBUS communications card
LDP6-CDC4C 58 Extended MODBUS communications card with dual RJ11 connector
Input Max DC Impedance Continuous
Range Accuracy* Blocking (60 Hz) Overload Resolution
200 mV 0.1% of rdg
+ 0.4 mV ±10V 686 kΩ 30V 0.01 mV
2V 0.1% of rdg
+ 2 mV ±50V 686 kΩ 30V 0.1 mV
20V 0.1% of rdg
+ 20 mV ±300V 686 kΩ 300V 1 mV
300V 0.2% of rdg
+ 0.3V ±300V*** 686 kΩ 300V 0.1 V
200 µA 0.1% of rdg
+ 0.4 µA ±15 mA 1.11 kΩ 15 mA 0.01 µA
2 mA 0.1% of rdg
+ 2 µA ±50 mA 111 Ω 50 mA 0.1 µA
20 mA 0.1% of rdg
+ 20 µA ±150 mA 11.1 Ω 150 mA 1 µA
200 mA 0.1% of rdg
+ 0.2 mA ±500 mA 1.1 Ω 500 mA 10 µA
5 A 0.5% of rdg
+ 5 mA ±7 A*** 0.02 Ω 7 A** 1 mA
True RMS Voltage/Current Inputs
*
Conditions for accuracy specification: 20 minutes warm-up, 18 to 28°C (64 to 82°F)
temperature range, 10 to 75% RH non-condensing, 50 Hz to 400 Hz sine wave input, 1% to
100% of range. Add 0.1% reading + 20 counts error over 0 to 50°C (32 to 122°F) range, 0.2%
reading + 10 counts error for crest factors up to 3, add 1% reading up to 5, 0.5% reading
+ 10 counts of DC component and 1% reading + 20 counts error over 20 Hz to 10 KHz range.
**
Non-repetitive surge rating: 15 A for 5 seconds
***
Inputs are directly coupled to the input divider and shunts. Input signals with high DC
component levels may reduce the usable range.
Note: Recommended
minimum clearance
(behind the panel)
for mounting clip
installation is 53.4
(2.1) H x 127 (5) W.