ENHANCED MODULAR
CONTROLLER SERIES
MASTER
csmstrle
l Adds Multiple Protocol Conversion Functionality to Data
Acquisition and Multi-Zone PID Control Applications
l Performs Hierarchical Control of Other Modules
in the Modular Controller Series
l Stores Module Configuration Information, and
Automatically Reprograms Replaced Modules
l Extensive Built-In Driver List Allows Easy Data
Mapping to PLCs, PCs, and SCADA Systems
l Independent Serial Ports Provide Virtually
Unlimited Integration Methods
l 10 Base-T/100 Base-TX Ethernet Connection
Provides Networking Capability
l Supports up to 16 Modular Controller Series Modules
l Supports up to 9 Protocols Simultaneously
(With Expansion Card)
Automation Controllers and HMI
The Model CSMSTRLE is a communications and control platform
designed for use with Modular Controller Series slave modules. The
CSMSTR uses a proprietary high speed serial protocol to communicate,
via backplane connection, with up to 16 slave modules. Through the
same connection, the Master also provides power to the modules.
When powered up, the CSMSTR automatically identifies and
addresses connected slave modules. By storing the configuration
information of all of the modules, the CSMSTR is able to automatically
configure modules if they are replaced.
The Master provides high-speed RS232/422/485 communication
ports and an Ethernet port for connection to PCs, PLCs, and SCADA
systems. An extensive list of master and slave protocol drivers are
available to allow the CSMSTR to share and exchange variable data
with external devices. The 10 Base-T/100Base-TX Ethernet port can
also be used to connect and share data with other devices at high speeds.
The design of the Modular Controller Series high density packaging
and DIN rail mounting saves time and panel space. The controller
snaps easily onto standard top hat (T) profile DIN rail.
The CSMSTR is programmed with Crimson 2.0 software for
Windows
graphical interface which provides a means of communication
configuration, as well as commissioning and calibration of new systems.
SPECIFICATIONS
Power: 24 Vdc ± 10% 400 mA min. (1 module)
3.5A max. (16 modules + expansion Card)
must use class 2 or SELV rated power supply
®
2000 or later platforms. The software is an easy to use,
CSMSTRLE,
shown smaller than
actual size.
Communications:
USB/PG Port: Adheres to USB specification 1.1. Device only
using Type B connection
Serial Ports: Format and Baud Rates for each port are
individually software programmable up to 115,200 baud
RS232/PG Port: RS232 port via RJ12
COMMS Ports: RS422/485 port via RJ45, and RS232 port
via RJ12
DH485 TXEN: Transmit enable; open collector,
VOH = 15 VDC, VOL = 0.5 V @ 25 mA max
Ethernet Port: 10 BASE-T / 100 BASE-TX RJ45 jack is
wired as a NIC (Network Interface Card)
LEDs:
STS: Status LED indicates condition of master.
TX/RX: Transmit/Receive LEDs show serial activity
Ethernet: Link and activity LEDs
CF: Compactflash LED indicates card status and read/write activity
Memory:
On-Board User Memory: 4 Mbytes of non-volatile flash memory
On-Board SDRAM: 2 Mbytes
Memory Card: Compactflash type II slot for type I and type II
cards (Used for optional database storage only)
Real Time Clock: Typical accuracy is less than one minute per
month drift
Battery: Lithium coin cell (included). Typical lifetime of
10 years at 25ºC (77°F)
1
Environmental Conditions:
Operating Temperature Range:
0 to 50°C (32 to 122°F)
Storage Temperature Range:
-30 to 70°C (-22 to 158°C)
Operating and Storage Humidity:
80% max relative humidity,
non-condensing, from
0 to 50°C (32 to 122°F)
Vibration According to IEC 68-2-6:
5 to 150 Hz, in X, Y, Z direction for
1.5 hours, 2 g’s
Shock According to IEC 68-2-27:
Operational 25g, 11ms in 3 directions.
Altitude: Up to 2000 meters
Construction: Case body is burgundy
high impact plastic and stainless steel.
Installation category I, pollution degree 2
Power Connection: Removable wire
clamp screw terminal block
Wire Gage Capacity: 24 AWG to 12 AWG
Torque: 4.45 to 5.34 in/lb (0.5 to 0.6 N-m)
Mounting: Snaps onto standard DIN style
top hat (T) profile mounting rails according
to EN50022 -35 x 7.5 and -35 x 15
Certification and Compliances:
Safety: UL Listed: File #E302106,
UL508, CSA 22.2 No. 14-M05 LISTED
by Und. Lab. Inc. to U.S. and Canadian
safety standards IEC 61010-1, EN
61010-1: Safety requirements for
electrical equipment for measurement,
control, and laboratory use, Part 1
Electromagnetic Compatibility:
Emissions and Immunity to EN 61326:
Electrical equipment for measurement,
control and laboratory use
Immunity to Industrial Locations*:
Electrostatic discharge EN 61000-4-2
Criterion A 2
4 kV contact discharge
8 kV air discharge
Electromagnetic RF fields EN 61000-4-3
Criterion A 10 V/m
Fast transients (burst) EN 61000-4-4
Criterion A
2 kV power
2 kV signal
Surge EN 61000-4-5 Criterion A
1kV L-L,2 kV L&N-E power
RF conducted interference EN 61000-4-6
Criterion A
3 V/rms
Emissions:
Emissions EN 55011 Class A
Weight: 456.4 g (15.1 oz)
To Order Visit omega.com/csmstrle for Pricing and Details
MODEL NO. MASTER MODULE DESCRIPTION
CSMSTRLE Modular controller master, multiple protocol converter (only)
SFCRM2MC Modular controller crimson programming software,
ACCESSORIES
MODEL NO. DESCRIPTION
G3CF064M 64 MB compact flash card
G3CF256M 256 MB compact flash card
G3CF512M 512 MB compact flash card
CBLPROG0 Programming cable for CS, G3, and paradigm
CBLUSB00 USB programming cable for G3, DSP and modular
PSDR0100 Mini power supply 1A
PSDR0200 Mini power supply 2A
PSDR0400 Mini power supply 4A
RSRSTP00 Rail stops (qty 2)
CSTERM00 Replacement termination plug
CSBASE00 Replacement base
CSTERM00 Replacement termination plug
MODULES
MODEL NO. MODULE DESCRIPTION
CSDIO14R 8-inputs 6 relay outputs
CSDIO14S 8-inputs 6 solid state outputs
CSINV800 8-channel ±10 V input module
CSINI800 8-channel 0(4) to 20 mA input module
CSOUT400 4-channel analog output
CSPID1R0 Single loop module, relay outputs
CSPID1RA Single loop module, relay outputs, analog output
CSPID1RM Single loop module, relay outputs, heater current input
CSPID1S0 Single loop module, solid state outputs
CSPID1SA Single loop module, solid state out. Analog output
CSPID1SM Single loop module, solid state, heater current input
CSPID1TA Single loop module, triac outputs, analog output
CSPID2R0 Dual loop module, relay outputs
CSPID2RM Dual loop module, relay outputs, heater current input
CSPID2S0 Dual loop module, solid state outputs
CSPID2SM Dual loop module, solid state outputs, heater current input
CSPID2T0 Dual loop module, triac outputs
CSPID2TM Dual loop module, triac outputs, heater current input
CSRTD600 6-channel input, RTD
CSSG10RA Single loop, 1 strain gage input, relay outputs, analog out
CSSG10SA Single loop, 1 strain gage input, solid state out, analog out
CSSG11RA Single loop, 2 strain gage input, relay outputs, analog out
CSSG11SA Single loop, 2 strain gage input, solid state out, analog out
CSTC8000 8-channel thermocouple module
Controllers come complete with termination plug, terminal power block, lithium battery, and
operator’s manual.
Ordering Example: CSMSTRLE, controller, SFCRM2MC, software, G3CF512M, 512 MB flash
card, CSDIO14R, 8 inputs 6 relay output module, PSDR0100, power supply.
manual and download cable
(industrial grade 2 million write cycles)
(industrial grade 2 million write cycles)
(industrial grade 2 million write cycles)
controller, type A-B
*Notes:
1. Criterion A: Normal operation within specified limits.
2. This device was designed for installation in an enclosure. To avoid electrostatic discharge to the unit in environments with static levels above
4 kV, precautions should be taken when the device is mounted outside an enclosure. When working in an enclosure (ex. making adjustments,
setting jumpers etc.), typical anti-static precautions should be observed before touching the unit.
2
Loading...