Omega Products CSDIO14S User Manual

A-36

MODULAR CONTROLLER
SERIES MASTER

 Performs Hierarchical Control of Other Modules

in the Modular Controller Series

 Provides Power and Communications to Modules

Through Backplane Connector

 Stores Module Configuration Information, and

Automatically Reprograms Replaced Modules

 Extensive Built-In Driver List Allows Easy Data

Mapping to PLCs, PCs, and SCADA Systems

 Independent Serial Ports Provide Virtually

Unlimited Integration Methods

 10 Base-T/100 Base-Tx Ethernet Connection

Provides Networking Capability

 Supports Up To 16 Modular Controller

Series Modules

 Supported By Crimson 2.0 Software

Starts at

$

308

The Model CSMSTRV2 is a communications and control platform
designed for use with Modular Controller Series slave modules. The
CSMSTRV2 uses a proprietary high speed serial protocol to
communicate, via backplane connection, with up to 16 slave
modules. Through the same connection, the Master also provides
power to the modules. When powered up, the CSMSTRV2
automatically identifies and addresses connected slave modules. By
storing the configuration information of all of the modules, the
CSMSTRV2 is able to automatically configure modules if they
are replaced.

The Master provides high-speed RS232/422/485 communication
ports and an Ethernet port for connection to PCs, PLCs, and SCADA
systems. An extensive list of master and slave protocol drivers are
available to allow the CSMSTRV2 to share and exchange variable
data with external devices. The 10 Base-T/100 Base-TX Ethernet
port can also be used to connect and share data with other devices
at high speeds.

The CSMSTRV2 was designed as a direct replacement for the
original CSMSTRSE. This new model provides benefits such as
support via Crimson 2.0 software, which allows configuration files
to be uploaded. To save programming time, files originally created
in Crimson 1.0 (.cdb files) may be imported into Crimson 2.0.

The design of the Modular Controller Series high density packaging
and DIN rail mounting saves time and panel space. The controller
snaps easily onto standard top hat (T) profile DIN rail.

The CSMSTRV2 is programmed with Crimson 2.0 software for
Windows

®

2000 or later platforms. The software is an easy to use,
graphical interface which provides a means of communication
configuration, as well as commissioning and calibration of
new systems.

SPECIFICATIONS

Power: 24 Vdc ± 10%

400 mA min (1 module)
3 A max (16 modules)
Must use Class 2 or SELV rated power supply

Communications:

USB/PG Port: Adheres to USB specification 1.1. Device

only using Type B connection
Serial Ports: Format and Baud Rates for each port are

individually software programmable up to 115,200 baud

RS232/PG Port: RS232 port via RJ12
COMMS Ports: RS422/485 port via RJ45, and

RS232 port via RJ12
DH485 TXEN: Transmit enable; open collector,

VOH = 15 Vdc, VOL = 0.5 V @ 25 mA max
Ethernet Port: 10 BASE-T / 100 BASE-TX
RJ45 jack is wired as a NIC (Network Interface Card)

LEDs:

STS: Status LED indicates condition of master
TX/RX: Transmit/Receive LEDs show serial activity
Ethernet: Link and activity LEDs

Memory:

On-Board User Memory:

4 Mb of non-volatile flash memory.

On-board SDRAM: 2 Mb

Environmental Conditions:

Operating Temperature Range: 0 to 50°C (32 to 122°F)
Storage Temperature Range: -30 to 70°C (-22 to 158°F)
Operating and Storage Humidity: 80% max relative

humidity, non-condensing, from 0 to 50°C
Vibration According to IEC 68-2-6: 5 to 150 Hz, in X, Y, Z

direction for 1.5 hours, 2 g’s.
Shock According to IEC 68-2-27: Operational 25g, 11ms

in 3 directions
Altitude: Up to 2000 meters

CSMSTRV2,
$308, shown
smaller than
actual size.

A-37

To Order

(Specify Model Number)

MOST POPULAR MODELS HIGHLIGHTED!

MODEL NO. PRICE MASTER MODULE DESCRIPTION

CSMSTRV2 $308 Modular controller master, multi comms ports and ethernet
SFCRM2MC 62 Modular controller crimson programming software,

manual and download cable

ACCESSORIES

MODEL NO. PRICE DESCRIPTION

G3CF064M $90 64 MB compact flash card

(industrial grade 2 million write cycles)

G3CF256M 235 256 MB compact flash card

(industrial grade 2 million write cycles)

G3CF512M 368 512 MB compact flash card

(industrial grade 2 million write cycles)

CBLPROG0 41 Programming cable for CS, G3, and paradigm
CBLUSB00 26 USB programming cable for G3, DSP and modular

controller, type A-B

PSDR0100 129 Mini power supply 1A
PSDR0200 159 Mini power supply 2A
PSDR0400 199 Mini power supply 4A
RSRSTP00 5 Rail stops (qty 2)
CSTERM00 10 Replacement termination plug
CSBASE00 31 Replacement base
CSTERM00 10 Replacement termination plug

MODULES

MODEL NO. PRICE MODULE DESCRIPTION

CSDIO14R $247 8 inputs 6 relay outputs
CSDIO14S 247 8 inputs 6 solid state outputs
CSINV800 536 8-channel ±10 V input module
CSINI800 536 8-channel 0(4) to 20 mA input module
CSOUT400 280 4-channel analog output
CSPID1R0 227 Single loop module, relay outputs
CSPID1RA 247 Single loop module, relay outputs, analog output
CSPID1RM 247 Single loop module, relay outputs, heater current input
CSPID1S0 227 Single loop module, solid state outputs
CSPID1SA 247 Single loop module, solid state out. Analog output
CSPID1SM 247 Single loop module, solid state, heater current input
CSPID1TA 247 Single loop module, triac outputs, analog output
CSPID2R0 340 Dual loop module, relay outputs
CSPID2RM 371 Dual loop module, relay outputs, heater current input
CSPID2S0 340 Dual loop module, solid state outputs
CSPID2SM 371 Dual loop module, solid state outputs, heater current input
CSPID2T0 340 Dual loop module, triac outputs
CSPID2TM 371 Dual loop module, triac outputs, heater current input
CSRTD600 402 6-channel input, RTD
CSSG10RA 320 Single loop, 1 strain gage input, relay outputs, analog out
CSSG10SA 320 Single loop, 1 strain gage input, solid state out, analog out
CSSG11RA 400 Single loop, 2 strain gage input, relay outputs, analog out
CSSG11SA 400 Single loop, 2 strain gage input, solid state out, analog out
CSTC8000 536 8-channel thermocouple module

Construction: Case body is burgundy
high impact plastic and stainless steel.
Installation category I, pollution degree 2

Power Connection: Removable wire
clamp screw terminal block

Wire Gage Capacity: 24 AWG to 12 AWG
Torque: 4.45 to 5.34 in/lb (0.5 to 0.6 N-m)
Mounting: Snaps onto standard DIN

style top hat (T) profile mounting
rails according to EN50022 -35 x 7.5

and -35 x 15.

Certifications and Compliances:

Safety:

UL Listed, File #E302106, UL508,
CSA 22.2 No. 14-M05 LISTED by
Und. Lab. Inc. to U.S. and Canadian
safety standards IEC 61010-1,
EN 61010-1: Safety requirements for
electrical equipment for measurement,

control, and laboratory use, Part 1

Electromagnetic Compatability:

Emissions and Immunity to EN 61326:

Electrical equipment for measurement,
control and laboratory use

Immunity to Industrial Locations*:

Electrostatic discharge EN 61000-4-2
Criterion A 2

4 kV contact discharge
8 kV air discharge
Electromagnetic RF fields EN 61000-4-3

Criterion A
10 V/m
Fast transients (burst) EN 61000-4-4

Criterion A
2 kV power
2 kV signal
Surge EN 61000-4-5 Criterion A
1kV L-L,2 kV L&N-E power
RF conducted interference EN 61000-4-6

Criterion A
3 V/rms

Emissions:

Emissions EN 55011 Class A
Weight: 365.7g (12.9oz)

*Notes:

1. Criterion A: Normal operation within
specified limits.

2. This device was designed for installation in
an enclosure. To avoid electrostatic discharge
to the unit in environments with static levels
above 4 kV, precautions should be taken
when the device is mounted outside an
enclosure. When working in an enclosure
(ex. making adjustments, setting jumpers
etc.), typical anti-static precautions should be
observed before touching the unit.

Controllers come with termination plug, terminal power block, and complete operator's manual.

Ordering Example: CSMSTRV2, controller, SFCRM2MC, software, G3CF512M, 512 MB
flash card, CSDIO14R, 8 inputs 6 relay output module, PSDR0100, power supply,
$308 + 99 + 368 + 247 + 129 = $1742.