Benchtop Temperature Controllers
MCS-2110J-R, $605, shown
smaller than actual size.
MCS-2110 Series
Starts at
$
605
⻬ On/Off or
Proportional Control
⻬ Convenient Receptacles
for Input and
Output Connections
⻬ Compact Benchtop Design
⻬ 15 A Maximum Output
⻬ J, K Thermocouple or
RTD Input
⻬ On/Off Power Switch
The MCS-2110 and CS-2110 series
benchtop controllers are ideal for
laboratory use and applications
requiring portable temperature
control. Pre-wired input and output
receptacles at the back of the case
enable quick and easy connections
to power, thermocouple or RTD
input and power output.
Thermocouple models use universal
female connector to accept either a
miniature or standard male connector.
RTD models use a 3-prong female
connector to accept an OTP-U-M
type connector. A 120 Vac, 15 A
maximum output receptacle can be
used to control heaters or other
devices up to 1800 watts. The
P-95
MCS-2110 and CS-2110 controllers
operate in either on/off or
proportional control modes,
selectable by a simple front
panel adjustment.
Control Modes
The CN2110 provides precise, solid
state proportion control with
automatic reset (PI) that will control
most heating applications. On/off
control may be selected for
applications where maximum output
life (load switching) is needed.
All models operate on 120 Vac,
15 A and include a 1.5 m (5')
power cord.
Specifications
Extended Warranty
Program
SM
ontrol Modes: On/off, PI-proportional
C
with integral
ontrol Adjustments
C
Proportional Band: sensor range
Automatic Reset:
0.0 to 99.9 repeats/minute
Cycle Time: 0.1 to 60.0 seconds
On/Off Deadband: 1° to 100°F or °C
Setpoint Upper Limit:
Sensor range °F or °C
Setpoint Lower Limit:
ensor range °F or °C
S
Output Limit: 0 to 100%
Alarm Adjustments:
Type: Absolute high or low
Setpoint: Sensor range °F or °C
Alarm Dead Band: 0° to 100°F or °C
Control/Alarm Outputs
Relay: Form “A”, 120 Vac
resistive loads at 30 seconds, cycle
time; 15 A, 500,000
operations; 15 A, 1 million operations;
5 A, 5 million operations
Solid State Relay: Up to 10 A at 40°C
Sensor Input: Switch selectable,
J, K thermocouple or RTD
Input Update Rate: 4 samples/s
Readout Stability:
J and K Thermocouple: ±1°F/10°F
change in ambient temperature
RTD: ±0.5 per 10°F change
in ambient temperature
Open Sensor and Out-of-Range
Conditions: Displays “SENS”; control
output 0%
Instrument Power: 120 Vac <10 Va
Operating Environment: 0° to 65°C
(32°to 150°F)
Enclosure Material: High-temperature
ABS plastic rated for 0° to 175°F
Front Panel: NEMA 4X construction
Influence of Line Voltage Variation:
±0.1% of sensor span per 10% change
in nominal line voltage
Noise Rejection:
Common Mode Noise: <2°F with
230 Vac, 60 Hz applied from sensor
input to ground
Series Mode Noise: <2°F with
100 mV, peak-to-peak series
mode noise
RFI: Typically <0.5% of sensor span
at distance of 1 m (3.1') from a
transmitter of 4 W at 464 MHz
Sensor Leadwire Effect:
RTD: ±0.1% of sensor span per
20Ω balanced leadwire resistance
OMEGACARESMextended warranty program is
available for models shown on this page. Ask
your sales representative for full details when
placing an order. OMEGACARE
labor and equivalent loaners.
SM
covers parts,
MCS-2110
Rear View
MC Output
AC power
The UPJ-K-F universal connector accepts either
a miniature or standard male connector.
Input Specifications
Input Type Range °F Range °C 25°C (77°F) Ambient
Iron–Constantan -100 to 1400°F -73 to 760°C 0.2% span ± 1 LSD
CHROMEGA®–ALOMEGA®-300 to 2400°F -184 to 1316°C 0.2% span ± 1 LSD
100Ω Pt, 3 wire -200 to 1000°F -128 to 538°C 0.2% span ± 1 LSD
Accuracy at
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model Number)
Model Number Price Input Type Range Description
MCS-2110J-R $605
MCS-2110K-R 605
MCS-2110RTD-R 605
MCS-2110J-T 635
MCS-2110K-T 635
MCS-2110RTD-T 635
CS-2110J-R 505
CS-2110K-R 505
CS-2110RTD-R 505
CS-2110J-T 535
CS-2110K-T 535
CS-2110RTD-T 535
Comes complete with operator’s manual.
Ordering Examples: MCS-2110J-R, benchtop controller, single 15 A relay output,
Type J thermocouple input, -73 to 760°C (-100 to 1400°F) range, $605.
OCW-3, OMEGACARESMextends standard 1-year warranty to a total of 4 years ($151),
$605 + 151 = $756.
P-96
Iron – -73 to 760°C Monogram®benchtop,
Constantan (-100 to 1400°F) relay, 15 A
CHROMEGA®- -184 to 1316°C Monogram®benchtop,
ALOMEGA
®
(-300 to 2400°F) relay, 15 A
100Ω Pt, -128 to 538°C Monogram®benchtop,
3-wire (-200 to 1000°F) relay, 15 A
Iron- -73 to 760°C Monogram®benchtop,
Constantan (-100 to 1400°F) AC SSR, 10 A
CHROMEGA®- -184 to 1316°C Monogram®benchtop,
ALOMEGA
®
(-300 to 2400°F) AC SSR, 10 A
100Ω Pt, -128 to 538°C Monogram®benchtop,
3-wire (-200 to 1000°F) AC SSR, 10 A
Iron – -73 to 760°C Economical benchtop,
Constantan (-100 to 1400°F) relay, 15 A
CHROMEGA®- -184 to 1316°C Economical benchtop,
ALOMEGA
®
(-300 to 2400°F) relay, 15 A
100Ω Pt, -128 to 538°C Economical benchtop,
3-wire (-200 to 1000°F) relay, 15 A
Iron – -73 to 760°C Economical benchtop,
Constantan (-100 to 1400°F) AC SSR, 10 A
CHROMEGA®- -184 to 1316°C Economical benchtop,
ALOMEGA
®
(-300 to 2400°F) AC SSR, 10 A
100Ω Pt, -128 to 538°C Economical benchtop,
3-wire (-200 to 1000°F) AC SSR, 10 A
P