CN1500 Series
Extended Warranty
Program
SM
Starts at
Wall-Mount, Multi-Zone
Ramp and Soak Process
Controllers
$
595
⻬ Large, 7-Segment,
7-Digit LED Display
20 mm (0.8") High
⻬ 4- and 7-Zone Controller
⻬ On/Off, PID, Heat/Cool
⻬ 7-Segment Ramp and
Soak Profile
⻬ Independent Profile for
Each Zone
⻬ Separate Control
Settings for Each Zone
⻬ Manual Setpoint Entry
for Each Zone
⻬ Indefinite Hold
During Ramp
⻬ Thermocouples, RTDs,
and Thermistors
⻬ 4 to 20 mA,
0 to 10 Vdc, Millivolts
⻬ Scaling for Millivolts,
Voltage, and Current
⻬ Easy to View
from a Distance
⻬ Better Visibility Than
Typical Panel-Mount Units
⻬ Protection from
Dust and Moisture
⻬ Sealed Enclosure with
Clear Plastic Front—
DIN IP65 Protection
Housed in a wall-mount, watertight
plastic enclosure, the CN1514 and
CN1517 Series are versatile,
multi-zone controllers. They feature
multiple control modes that are ideal
for a full range of applications, from
simple to complex processes.
Input type for each zone is selected
independently. Scaling and offset
allow current and voltage signals to
be converted and displayed in
engineering units. Temperature
from thermocouples, RTDs, and
thermistors can be displayed in
°C/°F. In addition, each zone has its
own ramp/soak profile, with up to
7 segments.
CN1517-TC,
$795, shown
smaller than
actual size.
On/off, as well as PID control, is
offered for optimal process stability.
Processes that do not require tight
control through complex tuning of
PID parameters can be run under
simple on/off control. Each zone has
its own set of on/off and PID
parameters, and each zone can be
programmed for heating or cooling.
Setpoint deviation, positive as well
as negative, can be viewed.
Additional functions include
min/max reading for each zone,
indefinite program hold, automatic
scanning and displaying of different
zones, and 3 display modes
(setpoint only, process only, or both
setpoint and process). Power,
P-93
CN1517 has
removable front
cover for easy
access to wiring.
control, and process signal
connections are conveniently made
with Euro style plug-in connectors.
Each zone has a 3-digit-long
engineering label that can be
programmed to indicate the type of
process being controlled (e.g., °C or
°F for temperature, psi for pressure,
etc.). Every controller's run status is
indicated by LEDs. Channel display
time is also programmable.
OMEGACARESMextended warranty program
is available for models shown on this page.
Ask your sales respresentative for full details
when placing an order. OMEGACARE
covers parts, labor and equivalent loaners.
SM
Specifications
Input Types:
l
J, K, T, E, R, S, B, thermistor
(2252 Ω @ 25°C), Pt100 RTD
l
to 20 mA loop current
4
l
Voltage—0 to 5 Vdc, 0 to 10 Vdc
l
Millivolt—0 to 100 mV
CJC Error: ±0.5°C (0.9°F)
[10 to 45°C (50 to 112°F)]
Open Thermocouple Indication:
“HELP” displayed
ACCURACY
Voltage: 0.05% FS
urrent: 0.05% FS
C
Resolution:
1°C/°F for T/Cs, RTDs;
0.1°C/0.2°F for thermistors
Process: 9999, 999.9, 99.99, 9.999
A/D Conversion:
20,000 count A/D converter
Conversion Rate: 7/sec (typical)
Display: Red 7-segment, 7-digit LED
display, 20 mm (0.8") high
Display Test:
8.8.8.8.8.8.8 on power-up
Scan Rate: 2 channels per second
Channel Display Time:
Programmable from 1 to 999 seconds
Power Options:
120 Vac—60 Hz (standard)
220 Vac—50/60 Hz (optional)
15 Vdc @ 900 mA (optional)
Scale: Programmable from 1 to 30,000
Offset:
0 to 20.00 (current)
0 to 100.00 (millivolt)
0 to 10.00 (voltage input)
Rate: 0 to 500 seconds
Proportional Band:
0 to 100% of span
Reset:0 to 50 repeats per minute
On/Off Deadband (Programmable):
0 to FS
Control Output:
5 Vdc drive @ 50 mA per zone
Dimensions/Enclosure
Case: 192 W x 160 H x 103 mm D
(7.55 x 6.29 x 4.05")
Weight: 1.4 kg (3 lb)
Material: Polystyrene with crystal-clear
polycarbonate lid
Ingress Protection:
Up to IP65 (DIN standard)
Type Range Accuracy
200 to 1190°C ±1°C ±1 count
-
-328 to 2174°F) ±2°F ±1 count
(
-170 to 1365°C ±1°C ±1 count
(-274 to 2489°F) ±2°F ±1 count
-155 to 400°C ±1°C ±1 count
(-247 to 752°F) ±2°F ±1 count
-185 to 915°C ±1°C ±1 count
(-300 to 1675°F) ±2°F ±1 count
0 to 1600°C ±3°C ±1 count
(32 to 2900°F) ±6°F ±1 count
0 to 1600°C ±3°C ±1 count
(32 to 2900°F) ±6°F ±1 count
470 to 1800°C ±3°C ±1 count
(900 to 3300°F) ±6°F ±1 count
RTD-385 (2-Wire) -200 to 800°C ±1°C ±1 count
(-328 to 1472°F) ±2°F ±1 count
RTD-392 (2-Wire) -100 to 450°C ±1°C ±1 count
(-148 to 842°F) ±2°F ±1 count
Thermistor -8 to 100°C ±0.5°C ±1 count
(17 to 212°F) ±1.0°F ±1 count
Current 1 to 30,000 counts 0.05% ±1 count
Millivolt 1 to 30,000 counts 0.05% ±1 count
Voltage 1 to 30,000 counts 0.05% ±1 count
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model Number)
Model No. Price Description
CN1514-(*) $595 Wall-mount 4-zone controller
CN1517-(*) 795 Wall-mount 7-zone controller
Note: Select input code from table below.
Input Code* Programable Inputs
TC J, K, T, E, thermocouple, 4 to 20 mA, 0 to 10 Vdc
RTD 100 Ω RTD, 4 to 20 mA, 0 to 10 Vdc
TH Thermistor, 4 to 20 mA, 0 to 10 Vdc
R R thermocouple, 4 to 20 mA, 0 to10 Vdc
S S thermocouple, 4 to 20 mA, 0 to 10 Vdc
B B thermocouple, 4 to 20 mA, 0 to 10 Vdc
MV 4 to 20 mA, 0 to 10 Vdc, 100 mV
*Select one.
P
The CN1500 Series have sturdy,
clear doors that open easily!
Recommended Reference Book:
Controller Tuning, PID
GE-2117, $20
See Section Y
For Additional Books
,
Power Options
Ordering Suffix Price Description
-1 N/C 240 Vac
-2 $25 8 to 15 Vdc
Accessories
Model No. Price Description
RELAY-URM-400 $145 Universal 15 A mechanical 4-relay module
RELAY-URM-800 195 Universal 15 A mechanical 8-relay module
Comes with complete operator’s manual.
Ordering Example: CN1514-TC-1, wall-mount 4-zone controller with T/C input, 240 Vac, $595.
P-94