Omega Products CL514 Installation Manual

omega.com

e-mail: [e-mail]

For latest product manuals:

omegamanual.info

User’s Guide

CL514

RTD Calibrator

®

MADE IN

Shop online at

Servicing North America:

U.S.A.: One Omega Drive, Box 4047

ISO 9001 Certified Stamford, CT 06907-0047

Tel: [phone] FAX: [phone]
e-mail: [e-mail]

Canada: 976 Bergar

Laval (Quebec) H7L 5A1, Canada
Tel: [phone] FAX: [phone]
e-mail: [e-mail]

For immediate technical or application assistance:

U.S.A. and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA

®

Customer Service: 1-800-622-2378 / 1-800-622-BEST

®

Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN

®

Mexico: En Espan˜ol: [phone]-7803 e-mail: [e-mail]

FAX: [phone] [e-mail]

Servicing Europe:

Benelux: Postbus 8034, 1180 LA Amstelveen, The Netherlands

Tel: [phone] FAX: [phone]
Toll Free in Benelux: 0800 0993344
e-mail: [e-mail]

Czech Republic: Frystatska 184, 733 01 Karvina´, Czech Republic

Tel: [phone] FAX: [phone]
Toll Free: 0800-1-66342 e-mail: [e-mail]

France: 11, rue Jacques Cartier, 78280 Guyancourt, France

Tel: [phone] FAX: [phone]
Toll Free in France: 0800 466 342
e-mail: [e-mail]

Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany

Tel: [phone] FAX: [phone]
Toll Free in Germany: 0800 639 7678
e-mail: [e-mail]

United Kingdom: One Omega Drive, River Bend Technology Centre

ISO 9002 Certified Northbank, Irlam, Manchester

M44 5BD United Kingdom
Tel: [phone] FAX: [phone]
Toll Free in United Kingdom: 0800-488-488
e-mail: [e-mail]

OMEGAnet®Online Service Internet e-mail

omega.com [e-mail]

It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI
regulations that apply. OMEGA is constantly pursuing certification of its products to the European New
Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in this document is believed to be correct, but OMEGA accepts no liability for any
errors it contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, human applications.

1

CL514

Basic Keypad Operations

1

1

EZ-Check™ Switch

Slide the switch to select from three user stored values for the desired
calibration points. The user can select HI, DIAL, and LO positions.
These values can easily be changed to suit the calibration
requirements.

2

SIMULATE/OFF/READ Switch

Turn the CL514 on to SIMULATE to output a
resistance corresponding to temperature. Turn
the unit to READ to read RTD resistance directly
in temperature.

3

EZ-Dial™ Knob

Turn the knob to change temperature in 0.1º
increments. Push and turn for faster dialing.
Push without turning to store new EZ-Check

™

HI/LO points in SIMULATE mode, or to clear EZ­Check

™

HI/LO points in READ mode.

CL514 Configuration

Instructions for Enabling and Disabling the Configuration Options

1. Turn the Model 512 on to SIMULATE or READ.

2. Press the EZ-Dial

™

Knob while the “PRESS EZ-DIAL KNOB FOR CONFIGURATION”

message is displayed.

3. Select options by turning the EZ-Dial

™

Knob until the arrow points to the desired

option.

4. The option can be enabled or disabled by tapping the EZ-Dial

™

Knob.

The CL514 c onfiguration menu will exit automatically after 5 seconds of inactivity and go
to normal operation with the options selected. These options are recalled at turn on until they
are changed again.

CL514 Configuration Menu

Auto Off ON/OFF

If Auto Off is ON, the unit will turn off after 30 minutes to save battery life, if there is no user activity. If Auto Off is OFF the unit will
stay on until it is turned off from the keypad. This is typically useful for manual loading or continuous use.

Display Units °C/°F

Pressing the EZ-Dial

™

Knob to toggles between °C or °F

RTD Pt100

αα

=3850, Pt100αα=3902, Pt100αα=3916, Pt100αα=3926,

Cu10

αα

=427, Ni110 Bristol, Ni120αα=672, Ω

To change RTD type, press the EZ-Dial™ Knob. Turn the EZ-Dial™ Knob to scroll through the list of available types. Press again to
save and return to the configuration menu.