Omega Lift MagicLift 32066, MagicLift 32126 User Manual

MagicLift™ Jack Stands

Model

32066
32126

Model 32066

Patent Pending

Capacity per pair

6 Ton
12 Ton

Model 32126

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

!

Read this manual and follow all the Safety Rules and Operating Instructions before using this product.

Obey all safety messages that follow this symbol to avoid possible injury or death.

! WARNING

To avoid crushing and related injuries:

NEVER work on, under or around a

load supported only by a hydraulic jack.
ALWAYS use adequately rated jack
stands.

SFA Companies

SAFETY AND GENERAL INFORMATION

Save these instructions.

pair of jack stands before using. The owner and operator of this equipment shall have an understanding of the jack
stands and safe operating procedures before attempting to use. The owner and operator shall be aware that use of
this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the
operator's native language before use of these jack stands is authorized. If any doubt exists as to the safe and proper
use of these jack stands, remove from service immediately.

Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
jack stand that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
immediately. If you suspect that the jack stand was subjected to a shock load (a load dropped suddenly, unexpectedly
upon it), immediately discontinue use until the stand has been checked by a factory authorized service center (contact
distributor or manufacturer for list of Authorized Service Centers). It is recommended that an annual inspection be

done by qualied personnel. Labels and owner’s manuals are available from manufacturer.

For your safety read, understand, and follow the information provided with and on this

PRODUCT DESCRIPTION

Omega "MagicLift™"
of a vehicle. Your Omega Jack Stands have a special Magic-Lift feature which allows the ratchet bar to automatically

adjust till it makes contact. Use as a matched pair to support one end of a vehicle only.

WARNING: Never use automotive jack stands to support both ends or one side of a vehicle! Use only one (1)

!

pair per vehicle. Rated capacity is per pair only!

WARNING: The "Magic Lift" adjustment function of this jack stand is not designed to support a load. The

!

Locking Pawl must be properly engaged for the jack stand to support weight.

Jack Stands are designed to support rated capacity, partial vehicle loads consisting of one end

SPECIFICATIONS

Model Capacity (per pair) Base Size Min. Height Max. Height

32066 6 Ton 11” x 9-3/4” 15-3/4” 24-3/8”

32126 12 Ton 14-3/4” x 12-3/4” 19-3/4” 30-1/4”

Ratchet Bar

Ratchet Bar Collar

Locking Handle

Spring

Ratchet Bar

Locking Pin

Locking Pawl

Air Spring

Figure 1 - Models 32066 & 32126 Components (model 32126 shown)

Base Frame

2