Omega Altise OWM75W User Manual

Before using your washing machine,please read this manual carefully and keep it for future reference.

Washing Machine

OWNER’S MANUAL

Read This Manual

Insid e you w ill f ind m any helpfu l hin ts on h ow to use and main tai n y our wash ing machine pr ope rly. Ju st a l itt le p reventative car e on yo ur p art can sa ve y ou a great de al o f ti me a nd m one y over the life of you r washi ng machi ne. You’ll find ma ny an swe rs to commo n probl ems in the chart of troubl esh oot ing tips. I f yo u revie w the cha rt o f Troublesh oot ing Tips first , you m ay no t nee d to call for se rvi ce.

Contents

Safety Precautions

Safety Precautions .............................................................

Overview of Washing Machine Install Washing Machine Operate Washing Machine

...........................................

....................................................

.................................................

Checklist and Preparation before Washing Clothes ............

View of Control Panel ........................................................

.........................................................

Select the procedure

Table of Washing Procedures ............................................

Maintenance

.....

Cleaning and Maintenance of Washing Machine Cabinet

Troubleshooting ...............................................................

Error Codes...........................................................................

Appendix

.......................................................................

...........................................................................

Care Label.................................................................

Product Specifications ...............................................

11 16 18 22 25 25 27 28 29 29 30

Safety Precautions

7 8

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person

responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

- Electrical connection must be made as per local wiring rules and regulations. Do not disconnect the appliance with wet hands or bare feet, and do not disconnect the power cord with extreme force.

- Remove appliance from power supply before cleaning or

performing maintenance.

- The new hose set with this appliance must be used. Do not

reuse old hose sets.

- This appliance is for indoor use only.

- In certain circumstances electrical appliances may be a safety

hazard. Check the conformity of voltage and power settings, which are specified on the information plate attached to the

appliance and/or packaging, with the usage conditions available.

- Do not place heavy objects in or on these appliances, or use for

storage, or let children play or swing from the door. Do not use the appliance until fully installed.

- The electrical connection must be accessible after installation.

- The appliance is not intended to be operated by means of an

external timer or separate remote control system.

P.02

- If the supply cord is damaged, it must be replaced by the manufacturer

or its service agent or a similarly qualified person in order to avoid a hazzard.

- The appliance is not to be used if industrial chemicals have been

used for cleaning.

P.03

Safety Precautions

- CAUTION - If this appliance is supplied from a cord extension set or an electrical portable device, the cord extension set or electrical portable device must be positioned so that it is not subjected to splashing or ingress of moisture.

- After a washing cycle, wait 2 minutes before opening the door. If water is still visible, do not open the door.

- Undergarments that contain metal reinforcements should not be placed in a the appliance. Damage to the appliance can result if metal reinforcements

come loose during the washing cycle.

- Do not cover the air inlet or exhaust openings.

- If appliances has ventilation openings in base, ensure carpet does not obstruct the openings.

- The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the appliance in such a way that a full opening of the appliance door is restricted.

- The maximum mass of dry load for washing is 7.5kg.

- Do not overturn the appliance either during operation or during maintenance.

- This appliance is for indoor use only.

- This appliance is intended to be used in household and similar applications such as:

Staff kitchen areas in shops, offices and other working environments; Farm houses; By clients in hotels, motels and other residential type environments; Bed and Breakfast type environments

- Packaging materials can be dangerous to small children - dispose of wisely.

- Do not install in wet rooms (like bathrooms) or areas with caustic or explosive gases.

- All travelling bolts must be removed before operation, otherwise the appliance will be damaged.

- Run the appliance washing cycle once without clothes before use.

- Do not wash or dry carpets or floor rugs in this appliance.

- Take care of hot water that is released when draining.

- Never refill water by hand during a washing cycle.

- Do not close the door with excessive force.

- This appliance has only one inlet for water (cold).

- Please remember to disconnect water and power supplies when

the appliance will not be used for long periods of time.

- Do not climb the appliance or sit on the top cover.

- This appliance should not be installed in a humid place.

- Do not build this appliance in.

- Before opening the door after a washing or drying cycle, check that the drum has stopped spinning. Do not add or remove clothes while the drum is

spinning.

- The transport bolts should only be reinstalled into this appliance by an authorised person.

- Do not allow the water drained out of the appliance to accumulate.

- When moving the appliance, never hold extruding parts of the appliance (especially the door).

- CAUTION – Do not connect to the hot water supply.

- Flammable and explosive or toxic solvents should NOT be used in this appliance. Petrolium products and alcohol for example, should not be used

as detergents. Only use detergents suitable for front loading washing machines.

P.04

P.05

Overview of Washing Machine

Components

Overview of Washing Machine

Detergent Drawer

Door

Service Panel

Control Panel

Power Plug

Outlet Hose

Detergent Box

P.06

Accessories

Transport

plughole

H plug

ole

( )

optional

Inlet pipe C

P.07

Outlet hose

(optionalsupport )

Install Washing Machine

Unpacking the washing machine

Unpack your washing machine and check if there is any damage during the transportation. Also make sure that all the items in the attached bag are received. If there is any damage to the washing machine during the transportation, or any item is missing, please contact the local dealer immediately.

Dispose the packing materials

The packing materials of this machine may be dangerous to kids. Please dispose them properly and avoid easy touch by kids. Please dispose the related packing materials according to the relevant local regulations. Please do no throw the packing materials away together with the other daily living rubbishes.

Remove transport bolts

Before using this washing machine, transport bolts must be removed from the backside of this machine. Please take the following steps to remove the bolts:

1.Loosen all bolts with spanner and then remove them.

2.Stop the holes with transport hole plugs.

3.Keep the transport bolts properly for future use.

Select the location

Before installing the washing machine, the location characterized as follows shall be selected:

- Rigid, dry, and level surface (if not level, please make it level with reference to the following figure “Adjust Leg”)

- Avoid direct sunlight

- Sufficient ventilation

- Room temperature is above 0 C

- Keep far away from the heat resources such as coal or gas. Make sure that the washing machine will not stand on power cord. Do not install the washing machine on the carpet floor.

Adjust Leg

1.When positioning the washing machine, please first check if the legs are closely attached to the cabinet. If not, please turn them to their original positions with hand or spanner and tighten the nuts with spanner.

2.After po four corners on top cover of washing machine in sequence. If the washing machine is not stable when being pressed, this leg shall be adjusted.

sitioning the washing machine, press

3.Ensure the positioning status of washing machine. Loosen the lock nut with spanner and turn the leg with hand until it closely contacts with the floor. Press the leg with one hand and fasten the nut closely to the cabinet with the other hand.

4.After being locked properly, press four corners again to make sure that they has been adjusted properly. If it is still unstable, it has to repeat Steps 2 and 3.

5.Put a solid cylinder (e.g. pop cans) oppositely on the top cover of the washing machine from in

the left, right, front and back directions. If the cylinder keeps stable, the washing machine is positioned level. If it rolls, the washing machine is positioned unlevel. The rolling direction is the direction of lower ground surface. Then, the two legs in this direction shall be raised at the same time until the washing machine is level. Steps 1~3 are repeated to make the bottom legs closely against the ground and the nuts shall be locked tightly.

Connect inlet pipe Connect the inlet pipe as indicated in the figure.

Install inlet pipe

1.Connect the elbow to tap and fasten it clockwise.

2.Connect the other end of inlet pipe to the inlet valve at the backside of washing machine and

fasten the pipe tightly clockwise.

Notes: after connection, if there is any leakage with hose, then repeat the steps to connect inlet pipe. The most common type of tap shall be used to supply water. If tap is square or too big, then standard tap shall be changed.

Place outlet hose

Put it beside the water trough.

Hole plug

This Hole plug is used to jam the hole on the back cabinet.

P.08

P.09

Install Washing Machine

2.Connect it to the branch drain pipe of the trough.

Max.100cm

Min.60cm

Position outlet hose properly so that the floor will not be damaged by water leakage. Notes: If the machine has

- When installing outlet hose, fix it properly with a rope.

- Position outlet hose properly so that the floor will not be damaged by water leakage.

outlet hose support, please install it like the following pictures.

Trough

Hose Retainer

Max.100cm Min.60cm

- If outlet hose is too long, do not force it into washing machine as it will cause abnormal noises.

Bind

Max.100cm

Min.60cm

Max.100cm

Electrical Connection

- As the maximum current through the unit is 10A when you are using its heating function, please make sure the power supply system (current, power voltage and wire) at your

home can meet the normal loading requirements of the electrical appliances.

- Please connect the power to a socket which is correctly installed and properly earthed.

- Make sure the power voltage at your place is same to that in the machine's rating label.

- Power plug must match the socket and cabinet must be properly and effectively earthed.

- Do not use multi-purpose plug or socket as extens

ion cord.

- Do not connect and pull out plug with wet hand.

- When connecting and pulling out the plug, hold the plug tightly and then pull it out. Do not pull power cord forcibly.

- If power cord is damaged or has any sign of being broken, special power cord must be selected or purchased from its manufacturer or service center for replacement.

WARNING

！

1.This machine must be earthed properly. If there is any short circuit, earthing can reduce the danger of electrical shock. This machine is equipped with power cord, which includes plug, earthing wire at earthing terminal.

2.Washing machine shall be operated in a circuit separate from other electrical appliances. Otherwise, power protector may be tripped or fuse may be burned out.

Operate Washing Machine

Checklist and Preparation before Washing Clothes Please read this operation method carefully to avoid the troubles of washing machine and damages of clothes.

Check if the first-washed clothes will be decolourised

After a white towel touched with liquid detergent is used to wash the invisible corners of the clothes, check if the white towel is stained with clothes' original color. As for the scarves and those clothes that easily get decolour ised among imported clothes, please wash them separately before washing. As for the stains on sleeves, collars and pockets,

use the liquid d gently. Finally put them into the washing machine to achieve more ideal washing effects. As for temperature-sensitive clothes, they shall

be washed as required in the labels. Otherwise,

it may cause colour change or distortion.

Keep in Mind:

Never put the clothes to be washed in washing machine for a long period of time.

Otherwise it may get moldy and cause spots. Therefore, please wash the clothes in time.

The clothes also may get colour changed or distorted if they are not washed according to

the stated washing temperature.

Clothes that can not be wa

The clothes that may get distorted if being immersed in water: Ties, waistcoats, western-style clothes, outer garments etc. may have obvious shrinkage

if being immersed in water; the decolourised clothes such as blended spinning clothes of

artificial fiber etc.

etergent and wash it with brush

shed by washing machine

P.10

P.11

+ 11 hidden pages