Omega Altise OTK30MX Specifications Sheet
Omega Microwaves OTK30MX
Omega stainless steel trim kit for microwaves
Technical details
Capacity: To fit 30 litre microwaves
OM30X
OM30CX
OM30GX
Cabinetry ventilation: An opening on the upper cavity
panel must be cut for air
circulation. This opening should
be placed at the rear with
minimum of 600mm x 100mm
Parts: Fascia assembly, 4x plastic female
clips, base assembly, 8x 6 gauge
screws and 2x 6 gauge screws
Aesthetics
Finish: Stainless steel
Installation type: Integrated
Aesthetics
Finish: Stainless steel
Installation type: Integrated
Dimensions/weight
Overall kit dimensions (mm): 376h x 592w x 20d (front fascia)
Cavity dimensions (mm): 376h x 566w x 600d
NB: Drawings are not to scale - they are to assist only. WARNING: technical specifications and product sizes can be varied by the manufacturer without notice. Cut-outs for appliances should only be by physical product measurements. The above information is indicative only.
Page 1
Updated 06/01/2017
Loading...