Omega Altise ORT9WXA Specifications Sheet

Omega Rangehoods

ORT9WXA

Omega 90cm slide-out rangehood with halogen lights, white body, two stainless steel fascia panels included – 40mm and 80mm.

Technical details

Profile type: Slide-out
Size: 90cm
Installation type: Built into overhead cabinetry
Airflow: 352m³/hr NET
Number of motors: 2
Watts of motor: 100W
Speeds: 3
Carbon filter: Included (ORCF110)
Filtration: 2 aluminium, removable and
washable filters
Lights: 2 x 20W halogen
Noise level (DB): 48-57dBA
Air extraction: Ducted or recirculating
Maximum current: 10amps 3 pin plug
Connection: 240V, 50Hz
Warranty: 24 months parts and labour

PLEASE NOTE: THIS PRODUCT IS CURRENTLY FITTED WITH AN
80MM RAIL AND COMES WITH A 40MM RAIL AS AN ACCESSORY.
PLEASE REFER TO INSTRUCTIONS FOR CHANGING RAILS.

Key features

Benefits

Aesthetics

Finish: White body and stainless steel
panel
Front rail: Yes, 80mm
Control type: Concealed sliding switch

Dimensions/weight

Overall dimensions (mm): 175h x 900w x 300d (450d extended)
Chimney height (mm): N/A
Flue diameter: 120mm

Weight: 12kg

NB: Drawings are not to scale - they are to assist only. WARNING: technical specifications and product sizes can be varied by the manufacturer without notice. Cut-outs for appliances should only be by physical product measurements. The above information is indicative only.

Page 8
Updated 08/11/2017

Carbon filter

Recirculation

Twin rail

A carbon filter does a superior job of cleaning the air before it re-enters the kitchen. This means you
will have less leftover odours and the air will smell fresher.

A recirculating rangehood draws the air inside the appliance, cleans it and pushes it through the
front panel. Because there is no ducting required, these rangehoods are very easy to install.

This product comes with an 80mm stainless steel panel and an additional 40mm panel, it offers the
flexibility of 2 panels which will suit all kitchen designs.