Omega Altise ORT6WXA Specifications Sheet

Omega Rangehoods

ORT6WXA

Omega 60cm slide-out rangehood with halogen lights, white body, two stainless steel fascia panels included – 40mm and 80mm.

Technical details

Profile type: Slide-out
Size: 60cm
Installation type: Built into overhead cabinetry
Airflow: 378m³/hr NET
Number of motors: 2
Watts of motor: 100W
Speeds: 3
Carbon filter: Included (ORCF110)
Filtration: 2 aluminium, removable and
washable filters
Lighting: 2 x 20W halogen
Noise level (DB): 47-56dBA
Air extraction: Ducted or recirculating
Maximum current: 10amps 3 pin plug
Connection: 240V, 50Hz
Warranty: 24 months parts and labour

PLEASE NOTE: THIS PRODUCT IS CURRENTLY FITTED WITH AN
80MM RAIL AND COMES WITH A 40MM RAIL AS AN ACCESSORY.
PLEASE REFER TO INSTRUCTIONS FOR CHANGING RAILS.

Key features

Benefits

Aesthetics

Finish: White body and stainless steel
panel
Front rail: Yes, 80mm
Control type: Concealed sliding switch

Dimensions/weight

Overall dimensions (mm): 175h x 600w x 300d (450d extended)
Chimney height (mm): N/A
Flue diameter: 120mm

Weight: 11.5kg

NB: Drawings are not to scale - they are to assist only. WARNING: technical specifications and product sizes can be varied by the manufacturer without notice. Cut-outs for appliances should only be by physical product measurements. The above information is indicative only.

Page 7
Updated 07/11/2017

Twin rails

Carbon filter

Recirculation

This product comes with an 80mm stainless steel panel and an additional 40mm panel, it offers the
flexibility of 2 panels which will suit all kitchen designs.

A carbon filter does a superior job of cleaning the air before it re-enters the kitchen. This means you
will have less leftover odours and the air will smell fresher.

A recirculating rangehood draws the air inside the appliance, cleans it and pushes it through the
front panel. Because there is no ducting required, these rangehoods are very easy to install.