OR914CXA
90cm chimney rangehood, wallmount,
stainless steel with glass canopy
size 900mmW x 480mmD x 823mmH maximum
nish stainless steel and glass
capacity 710m³/hr net, 923m³/hr gross
installation wallmount
ducting 150mm diameter ducting material required
motor 198 watt centrifugal, twin impellors
illumination 2 x 20-watt halogen globes, separate ush
speeds three, separate ush buttons
delay stop 5-minute delay stop, ush button
ltration single 4-ply aluminium grease lter —
noise rating 34–56 dBA maximum
power cable 1.65 metre
current 1.0 amp
warranty two years parts and labour
ID200209
code OR914CXA
NB: can be ducted direct to atmosphere
or recirculated to kitchen
buttons
removable, washable
PERFORMANCE
With a true net air extraction of 710m³/hr net an hour,
the more vigorous styles of cooking, such as pasta
boiling, griddle and stir frying, are catered for. At
the touch of the speed control, the power can be
switched down for the gentlest of simmers.
LOW MAINTENANCE
Easy cleaning is a premium with wipe-over 18/10
grade stainless steel surface. Two lift-out stainless
steel and aluminium four-ply grease lters can be
hand washed. The lighting and speed controls are
underslung and forward away from most of the
vapour trail and there is easy access to the twin light
globes.
QUIETNESS
34 to 56 dBA. The motor/impellor encasement and
internal ue are smooth-walled to eliminate air drag
and noise, hand-nished welded metal joins for no
vibration.
SAFETY
Thermal overload protector or motor; re-retardant
hardened metal and mesh. VO self-extinguishing
polycarbonate for motor housing and internal ue.
DUCTING THE AIR DIRECT TO ATMOSPHERE
Ideally, the ltered air is removed from the kitchen
and household to the outside of the building. This
method of rangehood installation ensures maximum
removal of the heat, vapours, odours and particleladen air.
RECIRCULATING THE AIR TO THE KITCHEN
When it is structurally impossible to duct the ltered
air to the outside of the building, the ltered air is
vented back into the kitchen via the recirculation
vents in the side of the chimney. A more frequent
inspection and washing of the metal grease lters is
recommended for this mode of installation.
The easily-removable grease lters will isolate most
of the grease, oil and food particles. These lters
are washable using warm, soapy water or medium
dishwasher program.
OR914CXA
upper telescopic fluepiece
298mmW x 278mmD
lower telescopic fluepiece
300mmW x 280mmD
ooooo
360
600
900
823 max
300
(298)
405
365 max
385
>
65
>
>
8mm
glass
148
340
530
1030
420
packaged:
net weight 20kg
gross weight 23kg
0.153m³
air exit aperture
50 fit 150mm
diameter ducting
1.65 metre
power cord
glass canopy
<
<
30
900
480
280
(278)
1.65 metre
power cord
300
337
480
165
195 max
with vents
concealed
air exit aperture
for 150mm o
ducting
/
<
<
65
<
<
52
90cm chimney rangehood, wallmount,
stainless steel with glass canopy
motor centrifugal with twin impellors
electrical supply 240 volt, 50 Hz
electrical connection 1.65 metre connected power cord
motor wattage 198 watts
illumination 2 x 20-watt halogen
total wattage 238 watts
current 1.0 amp
packaged dimensions 1180(390)mm x 445mm x 570mm
supplied instructions for installation, •
ID200209
code OR914CXA
with 10 amp 3-pin plug for direct
plugging to standard 10 amp GPO
operation and maintenance
wood screws, raw plugs, dyna •
bolts
FRONT ELEVATION
SIDE ELEVATION
PLEASE NOTE: drawings are not to scale.
They are to assist only.
CHIMNEY PLAN
PLAN
WARNING: technical specications and product sizes can be varied by
the manufacturer without notice. Cutouts for appliances should only be by
physical product measurements. The above information is indicative only.
PACKAGING