Omega Altise OCG90FXB Specifications Sheet

Omega Cooktops

Omega 90cm 5 burner gas cooktop with cast iron trivets, ﬂame failure electronic ignition and stainless steel ﬁnish.

OCG90FXB

* Gas connection point is located rear left

510mm

890mm

55mm

Technical details

Type of cooktop: Gas Ignition: Electronic Burners: 5 Gas type (natural/ULPG): Natural/ULPG ULPG adaptable: Yes, kit supplied Flame failure device: Yes Wok burner: Yes Fish burner: No Total power rating: 40.5 mj/hr over ﬁve burners Power: Far left centre: 13mj/hr Front centre: 3.4mj/hr Rear centre and front right: 6.3mj/hr Rear right: 11.5mj/hr Maximum current: 10 amps Connection: 240V, 50Hz Installation: Flex and plug

Warranty: 24 months parts and labour

Made in: Italy

Aesthetics

Finish: Stainless steel Type of controls: Knob Number of controls: 5 Location of controls: Front right Material of trivets: Cast iron trivets and burner caps Materil of burner: Galsi/pyral black coated

805mm

480mm

Dimensions/weight

Overall dimensions (mm): 55h x 890w x 510d Cut-out dimensions (mm): 805w x 480d

NB: Drawings are not to scale - they are to assist only. WARNING: technical speciﬁcations and product sizes can be varied by the manufacturer without notice. Cut-outs for appliances should only be by physical product measurements. The above information is indicative only.

Updated 30/08/2017

Key features

Flame failure A ﬂame failure device ensures gas cannot ﬂow from the cooktop when no ﬂame is present.

No ﬂame = no gas ﬂow = a safer home.

Cast iron trivets

Wok burner

Cast iron trivets are heavier and more durable than typical enamel coated trivets. This results in a more stable cooking surface and less chance of damage to the cooktop.

Wok burners provide high heat that is needed for effective wok cooking. Not only is it suitable for Asian cuisines it is also a powerful gas burner perfect for accelerating the cooking process.

Beneﬁts