Omega Research and Development, Inc. www.caralarm.com
Page - 2 Page - 11
Table of Contents
Introduction/System Overview................................................ 3
Valet Switch Overview ................................................................ 3
Remote Starting ....................................................................... 3
Using The Valet Switch .......................................................... 4
Valet Mode ................................................................................... 4
Pit-Stop Feature ............................................................................ 4
Other Remote Start Features ................................................... 4
Turbo Timer Feature .................................................................... 4
Status Light Functions ............................................................. 5
How to Program Features........................................................ 6-7
User Programmable Features .................................................. 7
Installer Programmable Features............................................. 8-10
Complete Programmable Features Matrix .............................. 11
Limited Lifetime Warranty .............................................. Back Cover
- IMPORTANT The RS-110-DP has many programmable features which can offer
more operations than those described in the basic system instructions. Mostly, these extra features and operations are configured
at the time of installation. Please read the sections of this manual
which explain programmable features, and consult your installer
for specifics on how your system is configured, and for installation
options which can be added to system after installation.
Complete Programmable Features Matrix
USER Features Ignition on, off, then press Valet Switch 5 times (BLUE Status Light).
# Feature Brake Pedal x 1 Brake Pedal x 2 Brake Pedal x 3 Brake Pedal x 4
1 Remote Start Run Time 10 Min. 5 min. 15 min. 20 min.
2 Steady/Flash Lights Rem. Start Steady Flashing
INSTALLER Features Ignition on, off, then press Valet Switch 10 times (BLUE Status Light).
1 Remote Start Activation Pulses 1 2 3 4
2 “Tach Wire” or “Tachless “ Tachless Tach Data Tach
3 Gasoline or Diesel Engine Gasoline Diesel
4 Sat. Port Green Wire Function Starter Pulse After Start Pulse After Stop Accessory Output
5 Ext. Starter Cranking Time .7 (minimum) 1.25 1.75 2.5 (maximum)
6 N/A
7 Turbo Timer OFF 1 min. 2 min. 3 min.