Omega LDP63100 User Manual

LLDDPP6633110000

Extra LLarge DDisplay

User’s Guide

LP0689X

Shop online at

omega.com

e-mail: [e-mail]

For latest product manuals:

omegamanual.info

OMEGAnet®Online Service

omega.com

Internet e-mail

[e-mail]

Servicing North America:

U.S.A.: One Omega Drive, P.O. Box 4047

ISO 9001 Certified Stamford, CT 06907-0047

TEL: [phone] FAX: [phone]
e-mail: [e-mail]

Canada: 976 Bergar

Laval (Quebec) H7L 5A1, Canada
TEL: [phone] FAX: [phone]
e-mail: [e-mail]

For immediate technical or application assistance:

U.S.A. and Canada: Sales Service: 1-800-826-6342/1-800-TC-OMEGA

®

Customer Service: 1-800-622-2378/1-800-622-BEST

®

Engineering Service: 1-800-872-9436/1-800-USA-WHEN

®

Mexico: En Español: [phone]-7803 e-mail: [e-mail]

FAX: [phone] [e-mail]

Servicing Europe:

Czech Republic: Frystatska 184, 733 01 Karviná, Czech Republic

TEL: [phone] FAX: [phone]
Toll Free: 0800-1-66342
e-mail: [e-mail]

Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany

TEL: [phone] FAX: [phone]
Toll Free in Germany: 0800 639 7678
e-mail: [e-mail]

United Kingdom: One Omega Drive, River Bend Technology Centre

ISO 9002 Certified Northbank, Irlam, Manchester

M44 5BD United Kingdom
TEL: [phone] FAX: [phone]
Toll Free in United Kingdom: 0800-488-488
e-mail: [e-mail]

It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI
regulations that apply. OMEGA is constantly pursuing certification of its products to the European New
Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in this document is believed to be correct, but OMEGA accepts no liability for any
errors it contains, and reserves the right to alter specifications without notice.

WARNING : These products are not designed for use in, and should not be used for, human applications.

3

z LARGE LED DISPLAY READABLE TO 180 FEET
z VARIOUS ANALOG INPUT MODULES;

DC VOLTAGE AND CURRENT
PROCESS SIGNALS
TRUE RMS VOLTAGE AND CURRENT
THERMOCOUPLE OR RTD
STRAIN GAGE/BRIDGE

z ALARMS, ANALOG OUTPUT, AND COMMUNICA TION
z PROGRAMMABLE USER INPUTS
z UNIVERSAL AC POWERED (85 to 250 VAC)
z PROGRAMMING SOFTWARE
z NEMA 4X/IP65

GENERAL DESCRIPTION

The LDP63100 is a versatile display that can increase productivity by
offering the plant floor or production area a large visual display of their current
status. Whether your measurement is voltage, current, process, temperature, or
strain gage, the LDP63100 can satisfy your requirement. Plug-in option cards
can add alarms, analog output, and communication/bus capabilities, making the
LDP63100 a truly Intelligent Panel Meter.

SAFETY SUMMARY

All safety regulations, local codes and instructions that appear in this and
corresponding literature, or on equipment, must be observed to ensure personal
safety and to prevent damage to either the instrument or equipment connected
to it. If equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.

The protective conductor terminal is bonded to conductive
parts of the equipment for safety purposes and must be
connected to an external protective earthing system.

SPECIFICATIONS

Input specifications, wiring, and programming information is contained in
the corresponding literature shipped with the ordered model.

1. DISPLAY: 4" (101 mm) Red LED

5-Digit: -19999 to 99999

2. POWER REQUIREMENTS:

AC Input Modules: 85 to 250 VAC, 50/60 Hz, 18 VA
LDP63100 Display: 85 to 250 VAC, 50/60 Hz, 10 VA

3. ANNUNCIATORS:
Display Indication: Three vertical dots on the left side of the unit identify

the displays for the following modes:

Setpoint Indication: Four vertical dots on the right side of the unit identify

the setpoint “ON” condition, with SP 1 being the top position through SP
4 at the bottom.

4. LDP63100 Programming: The unit is a large display, designed to be
remotely mounted. Therefore, the unit does not have a programming keypad.
Unit programming should be accomplished by one of the following methods:
Rear Terminal Block: External switches can be wired via the terminal block

to allow unit programming. Aminimum of 3 switches would be required.

Optional Programming Remote (LDP6-PGM): This option provides a 10

foot interconnecting cable and programming box. The Programming
Remote contains buttons allowing easy programming of the display.

Optional Serial Programming: You can purchase an RS232 or RS485 Comms

Card and program the unit via Crimson, a Windows

®

based software

program.

DIMENSIONS In inches (mm)

CAUTION: Risk of Danger

Read complete instructions prior to

installation and operation of the unit.

CAUTION: Risk of electric shock.

TOP Maximum

MIDDLE Minimum

BOTTOM Total

C

US LISTED

U

L

R

IND. CONT. EQ.

51EB

4

WARNING: Disconnect all power to the unit before

installing Plug-in cards.

Adding Option Cards

The LDP63100 series meters can be fitted with up to three optional plug-in
cards. The details for each plug-in card can be reviewed in the specification
section of the included manual. Only one card from each function type can be
installed at one time. The function types include Setpoint Alarms (LDP6-CDS),
Communications (LDP6-CDC), and Analog Output (LDP6-CDL). The plug-in
cards can be installed initially or at a later date.

SETPOINT ALARMS PLUG-IN CARDS (LDP6-CDS)

The LDP63100 series has 4 available setpoint alarm output plug-in cards.
Only one of these cards can be installed at a time. (Logic state of the outputs can
be reversed in the programming.) These plug-in cards include:

LDP6-CDS10 - Dual Relay, FORM-C, Normally open & closed
LDP6-CDS20 - Quad Relay, FORM-A, Normally open only
LDP6-CDS30 - Isolated quad sinking NPN open collector
LDP6-CDS40 - Isolated quad sourcing PNP open collector

ANALOG OUTPUT PLUG-IN CARD (LDP6-CDL)

Either a 0(4)-20 mA or 0-10 V retransmitted linear DC output is available
from the analog output plug-in card. The programmable output low and high
scaling can be based on various display values. Reverse slopes output is possible
by reversing the scaling point positions.

LDP6-CDL10 - Retransmitted Analog Output Card

COMMUNICATION PLUG-IN CARDS (LDP6-CDC)

A variety of communication protocols are available for the LDP63100 series.
Only one of these cards can be installed at a time. When programming the unit
via Crimson, the RS232 or RS485 Cards must be used.

PROGRAMMING SOFTWARE

DP6-SOFT is a Windows®based program that allows configuration of the
LDP63100 meter from a PC. This software offers standard drop-down menu
commands, that make it easy to program the LDP63100 meter. The program can
then be saved in a PC file for future use. A serial plug-in card is required to
program the meter using the software.

5. CERTIFICA TIONS AND COMPLIANCES:

SAFETY

UL Recognized Component, File #E313607, UL61010A-1, CSA C22.2
No. 1010-1

Recognized to U.S. and Canadian requirements under the Component
Recognition Program of Underwriters Laboratories, Inc.

UL Listed, File #E313547, UL508, CSA C22.2 No. 14-M95

LISTED by Und. Lab. Inc. to U.S. and Canadian safety standards

Type 4X Indoor Enclosure rating (Face only), UL50

IEC 61010-1, EN 61010-1: Safety requirements for electrical equipment

for measurement, control, and laboratory use, Part 1.

IP65 Enclosure rating (Face only), IEC 529

ELECTROMAGNETIC COMPATIBILITY

EMC specifications determined by the model.

6. ENVIRONMENTALCONDITIONS:

Operating Temperature Range: Determined by the model
Storage Temperature Range: -40 to 60°C
Operating and Storage Humidity: 0 to 85% max. RH (non-condensing)
Altitude: Up to 2000 meters

7. MOUNTING REQUIREMENTS:

Max. panel thickness is 0.375" (9.5 mm)
Min. panel thickness for NEMA 4/IP65 sealing is 0.060" (1.52 mm)

8. MODULE INSTALLATION:

24-pin shrouded connector on LDP63100 engages connector on input module

upon installation. Shroud ensures proper alignment by providing a lead-in for

the module connector.

9. CONNECTIONS: Wiring connections are made to the LDP63100 terminal

block and input module via high compression cage-clamp terminal blocks.

Input Module Wiring: Instructions are provided in the included bulletin.

LDP63100 Terminal Block Wiring:

Wire Strip Length: 0.3" (7.5 mm)
Wire Gage: 30-12 AWG copper wire
Maximum Torque: 5-7 inch-lbs (0.58-0.81 N-m)

CAUTION: DISCONNECT ALL POWER BEFORE
INSTALLING OR REMOVING MODULE

10. CONSTRUCTION: Aluminum front panel, enclosure, and rear cover with

textured black polyurethane paint for scratch and corrosion resistance

protection. Sealed front panel meets NEMA 4X/IP65 specifications for

indoor use when properly installed. Installation Category II, Pollution Degree

2. Panel gasket and keps nuts included.

11. WEIGHT: 5 lbs (2.25 kg) (less module)

OPTIONAL PLUG-IN CARDS AND ACCESSORIES

LDP6-CDC4C - Modbus (Connector)LDP6-CDC40 - Modbus (Terminal)

LDP6-CDC1C - RS485 Serial (Connector)

LDP6-CDC2C - RS232 Serial (Connector)

LDP6-CDC10 - RS485 Serial (Terminal)

LDP6-CDC20 - RS232 Serial (Terminal)