Omega k9 mundial ssx Reference Manual

Remote Control Quick Reference Guide
Arming: Press & Release the “Lock” button
CHIRP ONCE
THE PARKING LIGHTS
WILL FLASH ONCE
THE DOORS WILL LOCK
(IF CONNECTED)
Silent Arming: Press & Release the “3rd” button Twice in 3 sec.
2 X
THE DOORS WILL LOCK
(IF CONNECTED)
THE PARKING LIGHTS
WILL FLASH ONCE
2 X
Disarming: Press & Release the “Unlock” button
THE SIREN WILL
CHIRP TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
THE PARKING LIGHTS
WILL FLASH TWICE
Silent Disarming:
2 X
Press & Release the “3rd” button Twice in 3 sec
THE PARKING LIGHTS
WILL FLASH TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
2 X
Emergency Override:
THEN WITHIN 10 SECONDS
PRESS & RELEASE
VALET BUTTON
Panic: Press & Hold the “Lock” Button for 3 Sec’s, with the ignition “Off”
Hold 3 seconds
Hold 3 seconds
THE SIREN WILL SOUND
THE PARKING LIGHTS
WILL FLASH
Shock Sensor & Prewarn Bypass:
1) Arm the alarm by, Pressing & Releasing the “Lock” button
2) Within 2 seconds Press & Release the “3rd” button.
1.
Then
2.
1.
Then
2.
To Activate the Auxiliary Channel: Press & Hold The “3rd” Button
for 3 Seconds
Operate Remote Start Unit
Hold 3 seconds
Operate Window Roll-Up Unit
Open Electric Trunk
Hold 3 seconds
To Activate the 3rd Channel: Press & Hold The “4th” Button for 3
Hold 3 seconds
To Activate Remote Anti-Carjack: (programmable feature
Press & Hold the “4th” button, for 3 Secs, with the ignition “On”
Operate Remote Start Unit
Seconds
Operate Window Roll-Up Unit
Hold 3 seconds
Hold 3 seconds
Hold 3 seconds
#
10)
Arming the Alarm
The system may be "Armed" by any of 3 methods:
1) Remote Control Arming: Press & Release the “Lock” button
CHIRP ONCE
THE DOORS WILL LOCK
(IF CONNECTED)
THE PARKING LIGHTS
WILL FLASH ONCE
2) SILENT Remote Control Arming: Press & Release the “3rd” button
Twice within 3 seconds
THE PARKING LIGHTS
2 X
THE DOORS WILL LOCK
(IF CONNECTED)
Upon Arming: • The siren will chirp one time. (3 times if there is open zone)
• The parking lights will flash once.
• The doors will lock. (If an optional interface is connected)
• The starter interrupt will engage.
• The LED Status Indicator will begin to flash slowly.
WILL FLASH ONCE
2 X
- If a zone is open, (for example a car door), when arming, the alarm will still arm, but will bypass the open zone until the zone is secured (siren will chirp 3 times).
3) To Passively Arm: Turn Ignition “Off”, Then Close all Doors.
Automatic “Last Door Arming” is a programmable feature which allows the alarm to arm itself and, if desired, lock the doors upon arming.
If on, anytime the ignition is turned off, and then a door is opened and closed:
• The Siren will chirp once to confirm arming countdown has begun.
• The LED Status Indicator will begin to flash rapidly.
Thirty seconds later:
• The siren will chirp & the lights will flash once.
• The LED Status Indicator will begin to flash slowly.
• The starter interrupt will engage.
- The alarm is now fully armed. The doors will lock at this time, if programmed to do so, and if the vehicle is equipped.
- The system can not Last Door Arm if a protected zone is open. Should a ve­hicle door be opened during the arming countdown, the countdown will stop and start over again when the door is closed.
AUTO REARM (programmable) allows the Alarm to Rearm itself, if it is Disarmed.
Disarming the Alarm
The system may be "Disarmed" by any of 3 methods:
1) Remote Control Disarming: Press & Release the “Unlock” button
THE SIREN WILL
CHIRP TWICE
THE DOORS WILL UNLOCK
(IF CONNECTED)
THE PARKING LIGHTS
WILL FLASH TWICE
2) SILENT Remote Control Disarming: Press & Release the “3rd”
button Twice within 3 sec
THE PARKING LIGHTS
WILL FLASH TWICE
2 X
THE DOORS WILL UNLOCK
(IF CONNECTED)
Upon Disarm: • The siren will chirp twice. (4 chirps if alarm has activated & reset)
• The parking lights will flash twice. (4 times if alarm has activated)
• The doors will unlock. (If an optional interface is connected)
• The starter interrupt will disengage.
• The LED Status Indicator begins flashing rapidly for Automatic Rearming, until alarm Rearms or a vehicle door is opened.
2-STAGE DISARM: If Disarming the alarm while it is triggered (siren sounding), the first press of any remote control button will only silence the siren/horn. A second press of the “Unlock” button will Disarm the alarm.
2 X
IMMOBILIZER MODE: If this mode is programmed “On”, the starter interrupt will
remain engaged after the alarm is Disarmed, until the ignition is turned “On” and you Press & Release the Valet button.
(Refer to programmable feature # 5)
To Start Vehicle: .
1. Disarm the alarm, then Turn “On” the vehicle’s ignition
2. Press & Release the Valet Button.
Emergency Override
Step 1: With the system in the armed condition, enter the vehicle via the driver's
door (be aware that the alarm will trigger when the door is opened). Step 2: Using your key, turn the vehicle’s ignition to the "On" position. Step 3: Within 10 seconds, Press & Release the Valet/ Override Switch.
THEN WITHIN
10 SECONDS
System Armed & Activated
Regardless of method used to Arm the alarm, once Armed, the alarm will monitor all protected zones, and if an intrusion attempt is detected it will activate, or “trigger”.
A trigger consists of the following:
• The electronic siren, or optionally the vehicle’s horn, will start sounding.
• The exterior parking lights will flash on and off repeatedly.
An activation has a 30 second duration unless the system is disarmed using the remote control or the Valet /Override switch. If all protected zones are secure at the end of the trigger, the system will stop and rearm itself to detect further entry attempts. If a protected zone is still open at the end of the trigger cycle, the alarm will continue to re-trigger itself for up to six activated cycles before it resets itself and ignores the violated zone.
Remote Panic Operation
Should it be needed in a threatening situation, or you feel the need to attract attention, the alarm can be triggered using the remote control. Your alarm fea­tures “Panic Mode”, which allows you to activate “Panic” from the “Arm/Lock” button.
To Activate Remote Panic: Press & Hold the “Arm/Lock” Button,
for 3 seconds, with the ignition “Off”.
THE SIREN WILL SOUND
Hold 3 seconds
THE PARKING LIGHTS
WILL FLASH
Hold 3 seconds
Sensor By-pass
The shock sensor & Prewarn zone can be by-passed using the remote control. This may be useful in stormy weather.
1) Arm the alarm by, Pressing & Releasing the “Lock” button.
2) Within 2 seconds, Press & Release the “3rd” button.
1.
Then
2.
1.
Then
2.
- The siren will chirp once to confirm sensor has been by-passed.
- Upon Disarming the alarm, the sensor zone will reset.
Loading...
+ 9 hidden pages