Omega DE VILLE TOURBILLON CO-AXIAL, 513.53.39.21.99.001 User Manual
DE VILLE
TOURBILLON CO-AXIAL NUMBERED EDITION 38.7MM
Red gold on leather strap
Caliber
2635
513.53.39.21.99.001
V
Co-Axial escapement
l
Automatic
U
Chronometer
o
Sapphire crystal
t
Anti-reflective treatment on both sides
g
Gold 750‰ (18K)
C
Numbered Edition
n
Water-Resistant to a relative pressure of 3 bar (30
metres/100 feet)
WATCH FUNCTIONS
Your Tourbillon watch has two crowns:
The crown positioned at 3 o'clock (A) is used to manually wind the watch.
It should be turned gently and cannot be pulled out!
The crown situated on the caseback (B) is used to set the time.
WINDING FUNCTION
Self-winding: automatic with movements of the wrist.
Manual winding (only necessary when the watch has not been worn): turn the
crown anti -clockwise.
When the watch is not being worn, we recommend you place your Tourbillon on
the rotating watch-winder and select program 1.
TIME-SETTING
The crown on the caseback should be pulled out gently with a slight rotating
movement. Once the crown is pulled out, you can turn it in either direction to set
the minute and hour hand.
NB
When setting the minute hand in a clockwise direction and in order to perfectly
synchronise the time, one minute more than the exact time should be added.
When setting the minute hand in an anti-clockwise direction, no adjustment is
necessary.
Push the crown back to its initial position after setting the time.
1 / 2
FOLDOVER CLASPS
Opening (fig. 1): to open the clasp, press the two pushers on either side of the
OMEGA buckle and pull upwards.
Closing (fig. 2): put the watch on your wrist and close the clasp by pushing on it
with your thumb until you hear a click. (fig. 2).
Adjusting the length (fig. 3): free the longer section from the two slideways
(A) and from the catch (B). Adjust the bracelet in the required direction and
reinsert in the catch and the two slideways. Try the watch for size and readjust if
necessary.
2 / 2
Loading...