Specifications and Main Features
- Model: CYD218
- Type: 8 channel monitor for temperature with the capability to accommodate input on 8 external temperature sensors.
Supported Sensors:
- Silicon Diode (Range of 1.4 k to 475 k).
- PTC RTDs: 100 ohm Platinum (Range of 30 k to 675 k), 1000 ohm Platinum (Range of 30 k to 800 k)
- Measurement Type: Four Lead Method
- Excitation: Eight CC Source Channels
- Accuracy/Resolution:
- Maximum Update Rate: 16 Update Readings every second.
- Resolution: Between 0-99.99 Range could measure with accuracy of 0.001 degree. While 100-999.9 Range with 0.01 degree accuracy and above 1000 Range with 0.1 degree accuracy.
- Display: 4X20 character back light LCD.
- The number of input displays can be set from 1 to 8: Each Input feeder Maximum input on the Display is 2 times a second, yielding, an adjustable reading display and operation output readings of 5 or more a second.
- Number of Relays: (in case of CYD218s) the capacity of the system would be as high as 8 relays.
- Relay Contacts Types: NO (Normally Open) / NC (Normally Closed) and C (Common) contacts relays.
- Maximum rating of Relay Contacts: (30VDC 5 Amp available)
- For model CYD218S corrective output measurement is +10V as the Scale while Range would be from -10 up to +10V.
- Maximum of 1500 single reading data record log non – volatile.
- Maximum temperature range with the application safe and stable is between the range of 5 to 40 degree centigrade.
- Power Requirement: AC 100, 120, 220, 240 V; allows for variance of ±5% -10% / 50 or 60 Hz / 18VA.
- Size: 217mm width by 90mm height and 317mm depth.
- Weight: 3kg or roughly 6.6lbs. Πρόσθετες πληροφορίες Συχνές ερωτήσεις
Frequently Asked Questions
Q: What types of sensors can be used with the Model CYD218?
A: The Model CYD218 supports Silicon Diodes and PTC RTDs, including the 100 Ω and the 1000 Ω platinum RTDs
Q: What’s the range of the sensors?
A: The range of the silicon diode sensor is between 1.4 475 to 475K while the range for the platinum RTDs is 30 800 to 800K.
Q: And the temperature readings;how close can they be?
A: While the accuracy may vary by device and sensor, model CYD218 provides accuracy in the ranges which extends up to 0.001° of the set value.
Q: More than one display at a go, is it possible?
A: The display can read up to 1 to 8 independent inputs, whichever input configuration the user prefers. Thus, yes.
Q: From CYD218 data how can I do the logins?
A: This device has the capability to data log up to 1500 records of single reading, these readings may be set to a link or network computers, or alternatively may be stored in paper or printer material to be printed out.
Q: What type of outputs does Model CYD218S have?
A: Model CYD218S has two analog voltage outputs, which may be wired up to carry out the ratio function at parasited temperature.
Q: How do I get assistance in the event of error messages?
A: The Omega Instrumentation 8050 which is now integrated into the Omega engineering has certain technical glitches attached to its operation. There are times when the instrument on usage might not power on properly due to certain infrastructural issues and gives out an error message instead. The best course of action in such scenarios is to reach out directly to Omega engineering for assistance.
User Manual
Loading...