Omega 8005 User Manual

Instruction Manual For The Omega Model 8003/8005 Nutrition Center
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed including the following:
Read all instructions.
To protect against risk of electrical shock, do not put the motor base in water or other liquid.
Unplug from outlet when not in use, before putting on or taking off parts and before
cleaning.
Avoid contact with moving parts.
DO NOT operate any appliances with a damaged cord or plug, or after the appliance
malfunctions or is dropped or damaged in any manner.
Return appliance to the nearest authorized service facility for examination, repair or
electrical adjustment.
The use of attachments not recommended or sold by the manufacturer may cause fire,
electric shock or injury.
DO NOT use outdoors.
DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
DO NOT place on or near a hot gas or electric burner or in a heated oven. DO NOT use appliance for other than intended use.
Be sure to switch to off position after each use of your juicer.
DO NOT put your fingers or other objects into the juicer opening while it is in operation. If
food becomes lodged in the opening, use the plunger or another piece of fruit to push it down. When this method is not possible, turn the motor off and disassemble juicer to remove the remaining food.
DO NOT plug in until familiar with all the instructions and operating procedures.
DO NOT unplug from electrical outlet by pulling on the cord. To unplug, grasp the plug, not
the cord, and pull.
Turn off all controls before unplugging from or plugging into an electrical outlet.
WARNING: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
SAVE THESE INSTRUCTIONS.
OMEGA MODEL 8003/8005 NUTRITION CENTER
This heavy-duty juicer features a patented, stone mill-like auger, made of hygienic U.S. FDA­approved melamine, which prevents poisonous heavy metals from mixing with your fresh juices.
The Omega 8003/8005 Nutrition Center’s low speed of 80 RPM's ensures full taste and the highest nutritional value.
The Omega 8003/8005 Nutrition Center is easy to assemble and disassemble for quick cleaning. The Omega 8003/8005 Nutrition Center assures you many years of trouble-free, dependable
service. Ten-year warranty on all parts and labor.
MULTI-PURPOSE JUICER/FOOD PROCESSOR
FRUIT JUICE EXTRACTOR Omega 8003/8005 Nutrition Center efficiently juices
hard and soft fruits: even citrus fruits, usually one of the hardest fruits to juice.
VEGETABLE JUICE The Omega 8003/8005 Nutrition Center juices all kinds of
vegetables including carrots, beets, celery, peppers, and radishes without destroying the natural flavor and nutritional benefits. Fresh taste and full nutrition are guaranteed with this unique extraction process.
WHEAT GRASS AND LEAFY GREENS Wheat grasses, kale, cabbage, spinach, and
pine tree needles are just some of the natural products that can be juiced with the Omega 8003/8005 Nutrition Center. Enjoy the best that nature offers in raw foods of all kinds and juice them for full nutritional benefits.
FOOD PROCESSOR The Omega 8003/8005 Nutrition Center chops and minces,
providing natural flavor and nutrition from garlic, scallions, red pepper, ginger, and most other foods, including herbs and seasonings. Soft foods for special diets for babies and geriatric patients are quick and easy to prepare with the mincing set-up.
PASTA EXTRUDER Homemade spaghetti, linguini or breadsticks can be extruded in just
minutes with the included pasta nozzles.
HOMOGENIZES Make fresh frozen desserts, natural baby food and nut butters using your
fresh fruit and vegetables.
GRINDER Grind coffee beans and flour.
SPECIFICATIONS Model Omega 8003/8005 Nutrition Center
Width 7 inches Weight 15 lbs.
Length 10 1/4" (Base Only) 15 3/8" (Assembled) Height 7 3/8" (Base Only)
Parts
1 Hopper 2 Drum 3 Auger 4 Juicing Screen 5 Blank Cone 6 Drum Cap
Height 11 1/4" (Assembled)
Voltage 120V/60Hz Motor 1/3 HP single-phase induction
Auger RPM 75 to 85
7 Plunger 8 Brush 9 Bowl (2) 10 Sieve 11 Nozzles
Loading...
+ 8 hidden pages