Omega 5200, 5200A, 5200B Technical Manual

CALIBRE

5200

10 1/2’’’

Ø 23.90 mm

Version A Version B

1 2 3

Height on movement 4.70 mm

Number of rubies

23

RoHS model

No Yes

 

Omega personalised quartz movement, featuring circular graining, rhodium-plating and gilded engraving.

Three-hand display - hours, minutes and seconds. Chronograph with minute and 30-minute counters and

1/10 second and 60 second counters. Rate adjustment by inhibition. Stepper motor, with sixty impulses per

minute. Chronograph with two push-pieces. Time zone. ADD, SPLIT.

Technical Guide TG-19-C-052-E A

Prod. by: pelrom Date: 23.05.2007

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-052-E - A - 5200

/1

 

Page

Contents

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-052-E - A - 5200

/2

Differences between 5200A and 5200B 4

Spare parts list for Calibre 5200 5

Electrical tests 7

General information for Calibre 5200

Major points

Information on the battery (ref. 1449917)

1,55 V «Low Drain»

Ø 9,50 mm H 3,60 mm

Renata 394

Vartachron V394

UCAR, Energizer, Ray-O-Vac 394

Maxell, Sony, Panasonic SR616SW

Battery limitation spring position

Points to comply with

The battery limitation spring MUST be used to keep the

battery rmly in place.

Move the setting stem switch to position 3 to extract or
insert the setting stem.

It is not recommended to remove the gear-train from the
motor module without the specially-adapted holder,
ref. 506 0005

Movement exchange is recommended

According to Working Instruction 31. Repair and
movement exchange policy.

Information on setting of hands

The hands must be tted by means of force-compensated
broaches. All hands must be tted with the appropriate

movement-holder ref. 507 0041 with jewel support.

Mandatory tools :

Hand tting Ref.

Movement-holder for fitting 507 0041
center & counter hands

Movement holder for hand setting 507 0041

Tweezers

Plastic tweezers 502 310 0051

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-052-E - A - 5200

/3