Omcan Food Machinery MSSM70 Installation Manual

7 Gallon Stainless Steel Meat Mixer

MSSM70

7 Gallon Stainless Steel Meat Mixer

WARNING

Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury. Save these instructions in a safe place and on
hand so that they can be read when required.

Technical Details

Tank Capacity
Working Capacity
Overall Size

SAFETY PRECAUTIONS

General Safety Rules

WARNING: Read and understand all instructions.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot

cover all possible conditions or situations that could occur. It must be understood by the operator that

common sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.

WARNING: Please operate according to Operation Method and remain the proper operation procedures

before using. Please assemble and operate carefully, taking care not to scratch skin. Please do not put hands
around the paddles to avoid any possible hurt.

ASSEMBLY AND OPERATION INSTRUCTIONS

7 gallon
Up to 50 lbs. of mixture

24.3"L x 12.4"W x 16.7" H (618mm x 315mm x 425mm)

INSTRUCTION MANUAL

The Stainless Steel Meat Mixer provides a quite easy way to mix meat and your favorable fixing together with
clean steel structure and comfortable wood crank. It is convenient for install and transport, and could be used
at a restaurant, refectory, and private dinning room, etc. Before using the Stainless Steel Meat Mixer, please
read the following instructions carefully.

Assembly
Step 1: Take all parts out of #1 the meat tank, only leaving #6 the axle with paddles inside, with the axle fluted

end towards the hole of shorter axle support outside.

Step 2: Fix crank #15 onto the machine body through bolt #2

Operation
Step 1: Put ground meat into the tank of the mixer, and then put your favorable fixing into it.
Step 2: Turn the crank clockwise or counter-clockwise, and the paddle will mix the meat and fixing together.
Step 3: When the meat and fixing have been mixed well proportioned, take out them from the tank with tools.

Maintenance

The function of the Meat Mixer is to mix up the meat and fixing, or other your favorable food.
Please clean the mixer with water after using and wipe up.

WARNING: Always be as thorough as possible when cleaning and sanitizing components. Any parts

exposed to raw meat may harbor or develop bacteria causes illness or death.

WARNING: When cleaning with sanitizers, always follow the manufacturer's recommendations. Never

use products that cause exposed surfaces to render meat unsafe for consumption. Failure to follow this warning
may lead to sickness or death!

1 OF 2

7 Gallon Stainless Steel Meat Mixer

DIAGRAM & PARTS LIST

Part No.

1
2
3
4
5
6
7
8
9

10

Name
Meat Tank
Screw
Paddle Lock Knob
Short Shaft
Nylon Bushing
Tank Cover
Axle with paddles
Gear Shaft
Key
Gear

Q'ty

1
3
1
1
1
1
1
1
1
1

Part No.

2 OF 2

Name
11
12
13
14
15
16
17
18
19
20

C-Clip

Driving Gear Shaft

Gear Box

Bolt

Crank

Rubber Foot

Large Nylon Bushing

Small Nylon Bushing

Handle Screw

Oil Seal

Q'ty

1
1
1
4
1
4
2
2
1
1