Omcan RS-CN-0200 Operators Manual

Refrigerated Showcase

Model RS-CN-0200

Item 31809

Instruction Manual

Revised - 11/18/2019

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Table of Contents

Model RS-CN-0200

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

--------------------------------------------------------------------------------------- 6 - 7

----------------------------------------------------------------------------------------- 7 - 8

----------------------------------------------------------------------------------------- 8

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

Page

-------------------------------------------------------------------------- 5

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

------------------------------------------------------------------------------------------------- 14

------------------------------------------------------------------------------------- 9

---------------------------------------------------------------------------- 10 - 12

---------------------------------------------------------------------------- 13

---------------------------------------------------------------------------- 15

2

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

3

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

4

Safety and Warranty

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specications

Model RS-CN-0200 Power 1340 W

Electrical Heating Element 490 W Capacity 200 L / 7.06 cu. ft. Electrical 110V / 60Hz / 1Ph

Lamp Power 2.8 W x 3 (LED)

Temperature Range 2°C - 12°C / 35.6°F - 53.6°F Refrigerant and Injection R404a (340g) Type of Climate 6 Rated Current 8A

Shelf Size 37.2” x 9.5” / 945 x 240mm

Shelf Load Capacity 33.1 lbs. / 15 kgs. Dimensions 39.4” x 22” x 49.2” / 1000 x 559 x 1250mm Weight 253 lbs. / 114.8 kgs. Item Number 31809

5

Installation

Power receptacle Earth bar

HANDLE AND ASSEMBLING

Handle with care

Unplug wall socket before moving. Never tilt the refrigerator over 45 degrees during handling.

Storage

Always store refrigerator in a dry place.

Sufcient space

To allow for proper air circulation and increased refrigeration capabilities, the refrigerator must have at least 3 inches of space between wall and unit.

Proper ventilation

Always place the refrigerator in an area with good ventilation. For rst time use, wait at least 2

hours before plugging into wall socket.

Away from heat source

Never place the refrigerator near any type of heat source or in direct sunlight, as it reduces refrigeration capabilities.

No heavy load

Never put heavy items on top of the refrigerator.

No alterations/tampering

Never tamper with, or make changes to the refrigerator. Changes and add-ons should not be installed to the inside or outside of the refrigerator.

Stable location

Unpack and place the refrigerator on at, solid ground.

PREPARATION AND POWER SUPPLY

Exclusive power socket

Power supply should be 110V, single phase AC with exclusive single

Ground

phase three pin outlet and fuse (8A). The power outlet must be in close proximity to the ground.

6

Installation

No shared power outlets

Refrigerator cable should never share the power outlet with any other appliance, as cable

will overheat and may result in a re.

Protect cables

Extra caution should be used when handling cables, as broken or damaged cables can

cause sparking and may result in a re.

No water ushing

Never ush the refrigerator surface. This can cause leakage, which may result in electrical damage or re.

Never store ammables and explosives

No explosives or ammables should be stored in, or in proximity to, the refrigerator, such

as gasoline, alcohol, and adhesives.

No spray

Never spray ammables such as paint or coating near the refrigerator. This may cause re

or malfunction.

After power outage

After a power outage or the unplugging of the refrigerator, wait at least 5 minutes before plugging it back in.

No medicine

Medicine should not be stored inside of the refrigerator.

Operation

USE AND CAUTION

Before use:

• Plug refrigerator into the 110V exclusive socket.

• After the refrigerator is running, conrm that air suction/ltration is in order and that it is sufciently cold.

After checking to make sure the refrigerator is working properly, it may be used.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

7

Operation

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• The operation manual is not suitable for the persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge.

DIGITAL TEMPERATURE CONTROLLER

Features Of Function

Small, integrated digital controller, which is applicable to the compressor of 1 HP.

Main functions are: Temperature Display/Temperature Control/Manual-Automatic Defrost bt burning off/Lighting

Control/Value Storing/Self-Testing/Parameter Locking.

Front Panel Operation

1. Set temperature: Press “SET” button; set temperature will be displayed. Press or button to modify and store the displayed value. Press “SET” button to exit the adjustment and display the cold-room

temperature.

2. If no button is pressed within 10 seconds, the cold-room temperature will be displayed.

3. Lighting: Press button to activate light in refrigerator; press again to turn off.

4. Manual start/stop defrost: Press button and hold for 6 seconds to either defrost or to stop defrost.

5. Refrigeration LED: During refrigeration, the LED is on. When the cold room temperature is constant, the

LED is off. During delay start, the LED ashes.

6. Defrost LED: During defrosting, the LED is on. When it stops defrosting, the LED is off. During the delay of

defrost, the LED ashes.

Maintenance

1. Cabinet Cleaning: The product should be cleaned once a week with power supply disconnected. In cleaning, please use mild-rinsing water or non-corrosive products. Do not wash directly with water faucet.

2. De-Dusting for Condenser: The condenser should be cleaned every three months with power supply

disconnected. To clean condenser, remove rear metal cover and get rid of any dust found on the cooling n

of the condenser using a wire brush or high-pressure air gun.

3. Leak Check: Observe all connectors and welding joints for oil stain, which indicates a need for patching work, which can be done by professionals.

4. Frequently observe the operation of the product. In case of any abnormal noise or smell, cut off the power supply immediately and call professionals. Do not restart the product before source of trouble is found.

5. We will not be responsible for any accidents acquired through failure to follow previous notices.

8

Troubles Causes Solutions

Unusual noise under the bottom shelf.

Non-refrigerating in spite of normal operation.

Troubleshooting

Fan blade broken. Power off and x the blade.

Unit off. Power on. Melting process. Stop melting. Refrigerant leaking. Patch the leak and rell refrigerant.

Unit failure. Call for professionals.

Weak air from air curtain, and higher cabinet temperature.

Normal air curtain, but higher cabinet temperature.

Melting water overown. Heating pipe for melting water

Normal air curtain, but periodical

uctuation of cabinet temperature.

Evaporator blocked by frost. Increase melting frequency. Inside fan damaged. Replace the fan. Too low set point of temperature

controller. Vent blocked by storage. Remove the storage.

Insufcient refrigerant. Rell the refrigerant.

Too high set point of temperature controllers.

The wind curtain disturbed by

strong air ow.

Ambient temperature or humidity beyond standards.

damaged. Water-level controller failure. Replace the water-level controller. Ambient temperature or humidity

beyond standards. Condenser contaminated. Clean the condenser.

Poor venting of the unit. Improve the venting conditions. Heat protection of compressor

failure. Capillary is blocked by ice. Replace the drying lter. Temperature controller failure. Replace the temperature controller.

Adjust the set point.

Adjust the set point for the temperature controller.

Removing the disturbing factors.

Improve the conditions.

Replace the heating pipe.

Improve the conditions.

Replace the heat protection.

REFERENCE

Item Number Model Number Description Manufacturer Model Number

31809 RS-CN-0200

Refrigerated Showcase 200 L / 7.1 cu ft

110V/60/1 CE cQPSus

RTS-200L

9

Parts Breakdown

Model RS-CN-0200 31809

10

Model RS-CN-0200 31809

Parts Breakdown

11

Parts Breakdown

Model RS-CN-0200 31809

Item No. Description Position Item No. Description Position Item No. Description Position

68535 Power Cord for RTS-200L 1 68557 Bottom Shelf for RTS-200L 32 68585 Wind Deector for RTS-200L 63

61224 Dry Filter for RTS-200L 2 79322 Left Shelf Bracket for RTS-200L 33 68586

68536 Accumulator for RTS-200L 3 68558 Top Shelf for RTS-200L 34 70662 Cabinet Frame for RTS-200L 65

60143 Filling Pipe for RTS-200L 4 68559 Left Glass for RTS-200L 35 68587 Waterproof Plug for RTS-200L 66

68537 Base Board for RTS-200L 5 68560 Left Rear Pillar for RTS-200L 36 68588 Waterproof Plug for RTS-200L 66

68538 Left Bottom Base Panel for RTS-200L 6 68561 Pole for Shelf for RTS-200L 37 68589 LED Socket Bracket for RTS-200L 67

68539

61249 Compressor for RTS-200L 8 68563 Rear Body Board Foam for RTS-200L 39 71565 Fan Blade for RTS-200L 69

68540 Rear Cover of Base for RTS-200L 9 68564 Rear Body Board for RTS-200L 40 60682 Evaporator Fan Motor for RTS-200L 70

68541 Beam of Base for RTS-200L 10 68565 Top Left Pillar for RTS-200L 41 71564 Fan Guard for RTS-200L 71

68542 Connecting Pipe 1 for RTS-200L 11 68566 Left Bracket of Front Board for RTS-200L 42 68591 LED Lamp for RTS-200L 72

68452 Connection Pipe for RTS-200L 12 68567 Inside Top Board for RTS-200L 43 68592 Handle for RTS-200L 73

68543 Shelf of Base for RTS-200L 13 68568 Top Cover Foam for RTS-200L 44 68593 Evaporator Front Foam for RTS-200L 74

68544 Wire Ring for RTS-200L 14 68569 Perforated Plate for RTS-200L

68545 Water Chute of Left Glass for RTS-200L 15 68570 Top Cover for RTS-200L 46 68595 Front Top Base Panel for RTS-200L 76

68546 Water Chute of Right Glass for RTS-200L 16 68571 Front Board of Top Cover for RTS-200L 47 68596 Condenser for RTS-200L 77

68547

68548

68549 Insulating Foam for RTS-200L 19 68574 Front Board of Curtain for RTS-200L 50 79366 Fan Blade for RTS-200L 80

68550 Plastic Base of Evaporator for RTS-200L 20 68575 Top Right Pillar for RTS-200L 51 68597 Right Bottom Base Panel for RTS-200L 81

63459 Hose Fitting for RTS-200L 21 68576 Left Bracket of Front Board for RTS-200L 52 68598 Front Bottom Base Panel for RTS-200L 82

68551 Circlip for RTS-200L 22 68577 Right Glass for RTS-200L 53 68599

68552 Bush for RTS-200L 23 68578

68553 Plastic Base for Evaporator for RTS-200L 24 79336 Right Shelf Bracket for RTS-200L 55 68601

68554 Evaporator for RTS-200L 25 68579 Right Rear Pillar for RTS-200L 56 68602 Control Box Bracket for RTS-200L 86

68555

79312 Nut Decoration for RTS-200L 27 71655 Right Shelf Bracket for RTS-200L 58 68604 Switch of LED Lamp for RTS-200L 88

79313 Nut Gasket for RTS-200L 28 68581 Label Board for RTS-200L 59 61245

79314 Decoration Nut Gasket for RTS-200L 29 68582 Top Cover of Base for RTS-200L 60 61246 Wire Clip Holder for RTS-200L 90

68556 Left Top Base Panel for RTS-200L 30 68583 Evaporator Bracket for RTS-200L 61 60562 Front Wheels for RTS-200L 91

71654 Left Shelf Bracket for RTS-200L 31 68584 Right Top Base Panel for RTS-200L 62 60561 Rear Wheels for RTS-200L 92

Components of the Water Box for RTS-200L

Side Front Foam of the Evaporator for RTS-200L

Side Rear Foam of the Evaporator for RTS-200L

Decorative Cover of Screw Nut for RTS-200L

7 68562

17 68572 Curtain for RTS-200L 48 79365 Fan Guard for RTS-200L 78

18 68573 Insulating Foam for RTS-200L 49 7 0111 Evaporator Motor for RTS-200L 79

26 68580 Ventilated Board for RTS-200L 57 68603 Power Clip for RTS-200L 87

Reinforcement for Top Left Pillar for RTS-200L

Reinforcement for Top Right Pillar for RTS-200L

38 68590 Fan Blade of Evaporator for RTS-200L 68

45 68594 Handle Stiffener for RTS-200L 75

54 68600 Mainboard for RTS-200L 84

Left Board of Motor Bracket for RTS200L

Bottom Cover of Set-Up Box for Mainboard for RTS-200L

Top Cover of Set-Up Box for Mainboard for RTS-200L

Wire Clip Cover for RTS-200L 89

64

83

85

12

Model RS-CN-0200 31809

Electrical Schematics

13

Notes

________________________________________________________________________________________

14

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

https://omcan.com/warranty-registration/

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour diffusion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

15

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 5,000 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 5,000 productos con origen a nivel mundial.

Omcan RS-CN-0200 Operators Manual

Specifications and Main Features

Frequently Asked Questions

User Manual