Omcan RS-CN-0186 Service Manual

Refrigerated Showcases

Models RS-CN-0186, 0370-L

Items 44379, 44544

Instruction Manual

Revised - 01/21/2020

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Table of Contents

Model RS-CN-0186 / Model RS-CN-0370-L

Section

Disclaimer

General Information

Safety and Warranty

Technical Specications

Operation

Maintenance

-------------------------------------------------------------------------------------------- 3

--------------------------------------------------------------------------- 4 - 5

--------------------------------------------------------------------------- 5 - 7

----------------------------------------------------------------------------------------- 8 - 9

----------------------------------------------------------------------------------------- 9

Page

-------------------------------------------------------------------------- 7

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

------------------------------------------------------------------------------------------- 17 - 18

------------------------------------------------------------------------------- 9 - 10

---------------------------------------------------------------------------- 11 - 14

---------------------------------------------------------------------- 15 - 16

---------------------------------------------------------------------------- 19

2

Disclaimer

OMCAN IS NOT RESPONSIBLE FOR

ANY DAMAGES DUE TO WATER LEAKS.

WARRANTY FOR WATER LEAKS IS VOID

IF THE AMBIENT ROOM TEMPERATURE

EXCEEDS 75°F AND 55% RELATIVE

HUMIDITY, AND THE APPLIANCE DRAIN IS

NOT CONNECTED DIRECTLY TO A FLOOR

DRAIN.

3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

4

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

HANDLING AND INSTALLATION

Handle with care

Unplug wall socket before moving. Never tilt the refrigerator over 45 degrees during handling.

Storage

Always store the refrigerator in a dry place.

5

Safety and Warranty

Su󰀩cient space

To allow for proper air circulation and increased refrigeration capabilities, the refrigerator must have at least 4 inches of space between wall and unit.

Away from heat source

Never place the refrigerator near any type of heat source or in direct sunlight, as it reduces refrigeration capabilities.

No altercations/tampering

Never tamper with or make changes to the refrigerator. Changes and add-ons should not be installed to the inside or outside of the refrigerator.

PREPARATION AND POWER SUPPLY

Exclusive power outlet

Power supply should be 115-120V, single phase AC with exclusive single phase three pin outlet

(250V/10A) and fuse (6A). The power outlet must be

in close proximity to the ground.

Protect cables

Extra caution should be used when handling cables, as broken or damaged cables can cause sparking

and may result in a re.

Never store ammables and explosives

No explosives or ammables should be stored in,

or in proximity to, the refrigerator, such as gasoline, alcohol, and adhesives.

After power outage

After a power outage or the unplugging of the refrigerator, wait at least 5 minutes before plugging it back in.

Proper ventilation

Always place the refrigerator in an area with good

ventilation. For rst time use, wait at least 2 hours

before plugging into wall socket.

No heavy load

Never put heavy items on top of the refrigerator.

Stable location

Unpack and place the refrigerator on at, solid

ground.

No shared power outlets

Refrigerator cable should never share the power outlet with any other appliance, as cable will overheat

and may result in a re.

No water ushing

Never ush the refrigerator surface. This can cause leakage, which may result in electrical damage or re.

No spray

Never spray ammables such as paint or coating near the refrigerator. This may cause re or

malfunction.

No medicine

Medicine should not be stored inside of the refrigerator.

OMCAN IS NOT RESPONSIBLE FOR ANY DAMAGES DUE TO WATER LEAKS. WARRANTY FOR WATER LEAKS IS VOID IF THE AMBIENT ROOM TEMPERATURE EXCEEDS 75°F AND 55% RELATIVE HUMIDITY, AND THE APPLIANCE DRAIN IS NOT CONNECTED DIRECTLY TO A FLOOR DRAIN.

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

6

Safety and Warranty

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of without di󰀩culty.

In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specications

Model RS-CN-0186 RS-CN-0370-L Capacity 186 L / 6.6 cu.ft. 370 L / 13.1 cu.ft.

Compressor Power 0.75 HP 1 HP

Rated Current 11.6 A 14.5 A Refrigerant R404a Temperature Range 2 - 10°C / 35.6 - 50°F Electrical Heating

Element

Lamp Power 2.6W 3.2W

Number of Shelves 1 Electrical 110V / 60Hz / 1

Dimensions

Weight 198.4 lbs. / 90 kgs. 346 lbs. / 157 kgs. Item Number 44379 44544

26” x 35.9” x 42”

660 x 912 x 1067mm

450W

51.7” x 35.9” x 42”

1313 x 912 x 1067mm

7

Operation

BEFORE USE

• Plug refrigerator into the 110-120V exclusive socket.

• After the refrigerator is running, conrm that air suction/ltration is in order and that it is su󰀩ciently cold.

After checking to make sure the refrigerator is working properly, it may be used.

DIGITAL TEMPERATURE CONTROLLER

FEATURES OF FUNCTION

• Small, integrated digital controller, which is applicable to the compressor of 1 Hp.

• Main functions are: Temperature Display/Temperature Control/Manual-Automatic /Light Control/Value Storing/Self-Testing/Parameter Locking.

FRONT PANEL OPERATION

1. Set temperature: Press button; set temperature will be displayed. Press or button to modify and store the displayed value. Press button to exit the adjustment and display the cold-room temperature.

2. If no button is pressed within 10 seconds, the cold-room temperature will be displayed.

3. Lighting: Press button to activate light in refrigerator; press again to turn o󰀨. Manual start/stop defrost:

Press button and hold for 6 seconds to either defrost or to stop defrost.

4. Refrigeration LED: During refrigeration, the LED is on. When the cold room temperature is constant, the LED is o󰀨. During delay start, the LED ashes.

5. Defrost LED: During defrosting, the LED is on. When it stops defrosting, the LED is o󰀨. During the delay of defrost, the LED ashed.

6. Digital controller reset: When the display shows “Disorder”, press button for 2 seconds until buzzer rings. Quickly press button for 6 seconds until the buzzer rings again, the display will ash for 3 seconds and it

will restore to the factory settings.

CAUTION

• Minimizing time the time and frequency that the door is open will maintain temperature.

• Never block the air outlet and suction to keep the air circulation and refrigeration capability constant.

• Do not overll refrigerator with food, as it will inuence the cooling e󰀨ect. If needed, adjust the rack height

for proper food storage.

• Cool down hot food to room temperature before placing inside the refrigerator.

• When power supply has been cut o󰀨, reduce opening times and maintain cool temperature in refrigerator.

8

Operation

• To avoid scalding, never touch the compressor.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualied persons in order to avoid hazard.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

Maintenance

1. Cabinet Cleaning. The product should be cleaned once a week with the power supply disconnected. Please use mild detergent and water. Do not wash it directly with a water faucet or by submerging the unit in any way.

2. De-dusting the condenser. The condenser should be cleaned every three months with the power supply disconnected. To clean the condenser, use a wire brush carefully.

3. Leaking check. Observe all connectors and welded joints for oil stains, is oil stains are visible please call Omcan.

4. Frequently observe the operation of the product. In case of any abnormal noise or smell, cut o󰀨 the power supply immediately and call professionals. Do not restart the product before source of trouble is found.

5. We will not be responsible for any accidents acquired through failure to follow previous notices.

Troubleshooting

DIGITAL CONTROLLER TROUBLESHOOTING

Fault Code Causes Solutions

EE1 Open or short circuit of

temperature probe.

EE2 Open or short circuit of defrosting

probe.

EE3 Open or short circuit of overheating

probe.

EE4 Overheating probe starts

protecting program 58°C / 136.4°F.

Check if the plug on the mainboard is loose, or change the temperature probe.

Check if the plug on the mainboard is loose, or change the defrosting probe.

Check if the plug on the mainboard is loose, or change the overheating probe.

Clean the condenser. Repair or replace the Condenser motor. Ensure the unit is at least 50cm away from the wall. Ensure the ambient temperature is within the range

specied on the rating label.

9

Troubleshooting

GENERAL TROUBLESHOOTING

Problems Possible Causes Solutions

Strange noise under the bottom shelf.

Non-refrigerating in spite of normal operation.

Weak air from air curtain, and higher cabinet temperature.

Normal air curtain, but higher cabinet temperature.

Melting water overown. Heating pipe for melting water

Normal air curtain, but periodical

uctuation of cabinet temperature.

Fan blade broken. Power o󰀨 and x the blade.

Unit o󰀨. Power on.

Melting process. Stop melting. Refrigerant leaking. Patch the leak and rell refrigerant. Unit failure. Call Omcan. Evaporator blocked by frost. Increase melting frequency. Inside fan damaged. Replace the fan. Too low set point of temperature

controller. Vent blocked by storage. Remove the storage.

Insu󰀩cient refrigerant. Rell the refrigerant.

Too high set point of temperature controller.

The wind curtain disturbed by

strong air ow.

Ambient temperature or humidity beyond standards.

damaged. Water-level controller failure. Replace the water-level controller. Ambient temperature or humidity

beyond standards. Condenser contaminated. Clean the condenser. Poor venting of the unit. Improve the venting conditions.

Heat protection of compressor

failure. Capillary is blocked by ice. Replace the drying lter. Temperature controller failure. Replace the temperature controller.

Adjust the set point.

Adjust the set point for the temperature controller.

Remove the disturbing factors.

Improve the conditions.

Replace the heating pipe.

Improve the conditions.

Replace the heat protection.

NOTE

Following occurrences are not problems:

• The murmur of water is heard when the refrigerator is working. It is a normal occurrence as the coolant is circulating in the system.

• When the weather is damp, condensation might be found on the outside of the refrigerator. It is caused by high humidity. Simply use cloth to wipe it o󰀨.

10

Model RS-CN-0186 44379

Parts Breakdown

11

Parts Breakdown

Model RS-CN-0186 44379

Item No. Description Position Item No. Description Position Item No. Description Position

60670 PPR Pipe Strap for RTS-186L 1 68311 Evaporator Cover for RTS-186L 26 68336 Fan for RTS-186L 52

68298 Switch Base for RTS-186L 2 68312 Front Decorating Board for RTS-186L 27 68337 Motor for RTS-186L 53

68299 Switch Base Lid for RTS-186L 3 68313 Left Board for RTS-186L 28 68338

68300 Display for RTS-186L 4 68314 Windshield Strip for RTS-186L 29 68339 Windshield for RTS-186L 55

70105 Switch for RTS-186L 5 68315 Air Intake for RTS-186L 30 68340 Front Decorating Board for RTS-186L 56

68301 Strong Magnet for RTS-186L 6 68316 Windshield of Air Intake for RTS-186L 31 60932 Flange for RTS-186L 57

61224 Dry Filter for RTS-186L 7 68317 Left Board for RTS-186L 32 60933 Fan for RTS-186L 58

68302 Pressing Plate of Dry Filter for RTS-186L 8 68318 Left Glass for RTS-186L 33 68341 Motor for RTS-186L 59

60669 Slot for RTS-186L 9 68319 Rear Ventilation for RTS-186L 34 60674 Driver for RTS-186L 60

61246 Wire Clip Holder for RTS-186L 10 68320 Rear Board Assembly for RTS-186L 35 68342 Condenser for RTS-186L 61

61245 Cable Clip Lid for RTS-186L 11 68321 Curtain for RTS-186L 36 68343 Condenser Motor Support for RTS-186L 62

60561 Caster for RTS-186L 12 68322 LED for RTS-186L 37 68344 Supporting Bar for RTS-186L 63

60562 Caster with Brake for RTS-186L 12 60637 Jump Ring of LED for RTS-186L 38 79368 Air Filter for RTS-186L 64

67641 Compressor for RTS-186L 13 68323 Top Decorating Plate for RTS-186L 39 68345

68303 Base Net for RTS-186L 14 68324 Top Decorating Plate for RTS-186L 40 68346 Window-Shades Board for RTS-186L 66

68304 Mufer for RTS-186L 15 68325 LED Assembly for RTS-186L 41 68347 Base for RTS-186L 67

68305 Copper Heating Element for RTS-186L 16 68326 Honeycomb Fixed Plate for RTS-186L 42 68348 Window-Shades for RTS-186L 68

60651 Curtain Hook for RTS-186L 17 68327 Honeycomb Plate for RTS-186L 43 68349 Base Stiffening Board for RTS-186L 69

60587 Water Tray Assembly for RTS-186L 18 68328 Right Glass for RTS-186L 44 61167 Circuit Board Box for RTS-186L 70

79304 Water Evaporating Pipe for RTS-186L 19 68329 Right Board for RTS-186L 45 67649 Mainboard for RTS-186L 71

68306 Leakage for RTS-186L 20 68330 Right Board for RTS-186L 46 60594 Mainboard Box Lid for RTS-186L 72

68307 Heating Element for RTS-186L 21 68331 Windshield Clamp for RTS-186L 47 79290 Power Line for RTS-186L 73

68308 Heating Element Support for RTS-186L 22 68332 Temperature Sensor for RTS-186L 48 60668 Drainage for RTS-186L 74

71562 Evaporator for RTS-186L 23 68333 Over-Heating Sensor for RTS-186L 49 67643 Terminal Box for RTS-186L 75

68309

68310

Right Fixed Plate of Evaporator Motor for RTS-186L

Fixed Plate of Evaporator Motor for RTS-186L

24 68334

25 68335 Flange for RTS-186L 51 60590 PVC Trunking for RTS-186L 77

Right Fixed Plate of Evaporator Motor for RTS-186L

50 67642 Terminal Box Lid for RTS-186L 76

Evaporator Base Board Assembly for RTS-186L

Base Cover Assembly for RTS-186L 65

54

12

Model RS-CN-0370-L 44544

Parts Breakdown

13

Parts Breakdown

Model RS-CN-0370-L 44544

Item No. Description Position Item No. Description Position Item No. Description Position

60562 Caster with Brake for RTS-370L 1 68363 Rear Ventilation Board for RTS-370L 30 66351 Fan for RTS-370L 58

60561 Caster for RTS-370L 2 68327 Honeycomb Plate for RTS-370L 31 60932 Flange for RTS-370L 59

68351 Base Assembly for RTS-370L 3 68364 Honeycomb Fixing Plate for RTS-370L 32 68337 Condenser Fan Motor for RTS-370L 60

61246 Wire Clip Holder for RTS-370L 4 68365 Honeycomb Fixing Plate for RTS-370L 33 68382

61245 Wire Clip Cover for RTS-370L 5 68366

60726 Power Line for RTS-370L 6 68367 Left Bafe of Air Duct for RTS-370L 35 68384 Evaporator for RTS-370L 63

67690 Compressor Protect Probe for RTS-370L 7 68317 Left Plate for RTS-370L 36 68385

68353 Temperature Sensor for RTS-370L 8 68318 Left Glass for RTS-370L 37 68386 Right Bafe of Air Ducts for RTS-370L 65

68313 Left Side Board for RTS-370L 9 68306 Leakage for RTS-370L 38 68387

68354 Compressor Base Board for RTS-370L 10 68368 Snap Ring for RTS-370L 39 68388 Evaporator Water Tray for RTS-370L 67

68355 Compressor for RTS-370L 11 68369 Base Board for RTS-370L 40 68389

67642 Cover of Terminal Box for RTS-370L 12 68370 Rear Board for RTS-370L 41 68390 Base Cover for RTS-370L 69

68356 Driver for RTS-370L 13 68371 Curtain for RTS-370L 42 68391

60590 PVC Trucking for RTS-370L 14 68372 LED for RTS-370L 43 60652

60594 Cover of Mainboard Box for RTS-370L 15 60637 Jump Ring of LED for RTS-370L 44 68392 Water Tray Support for RTS-370L 72

67649 Mainboard for RTS-370L 16 68373 Upper Decorative Sheet for RTS-370L 45 68393

61167 Circuit Board Box for RTS-370L 17 68374 Top Fixing Plate for RTS-370L 46 68394 Seal Ring for RTS-370L 74

67643 Terminal Box for RTS-370L 18 68375 Top Decorative Sheet for RTS-370L 47 68395 Bibcock for RTS-370L 75

68357 Stiffening Plate of Base for RTS-370L 19 68328 Right Glass for RTS-370L 48 60587 Water Tray Assembly for RTS-370L 76

68358 High Pressure Joint Pipe for RTS-370L 20 68329 Right Plate for RTS-370L 49 68396 Motor for RTS-370L 77

61224 Dry Filter for RTS-370L 21 68376 Air Intake Support for RTS-370L 50 68397 Condenser for RTS-370L 78

68359 Pressing Plate of Dry Filter for RTS-370L 22 68377 Windshield of Air Intake for RTS-370L 51 60670 PPR Tube Strap for RTS-370L 79

68360 Net in Base for RTS-370L 23 68378 Air Intake for RTS-370L 52 68398 Copper Connection for RTS-370L 80

68361 Switch Panel for RTS-370L 24 68379 Windshield for RTS-370L 53 60668 Stainless Steel Drainage for RTS-370L 81

68298 Switch Panel Base for RTS-370L 25 68331 Windshield Clamp for RTS-370L 54 68301 Strong Magnet for RTS-370L 82

68299

70105 Switch for RTS-370L 27 68402 Front Decorating Board for RTS-370L 56-1 68400

68300 Display for RTS-370L 28 68403 Front Dead Plate for RTS-370L 56-2 68330 Right Board for RTS-370L 85

68362 Baseboard for RTS-370L 29 68381 Evaporator Support for RTS-370L 57 68401

Cover Plate of Switch Panel Base for RTS-370L

26 68380 Saddle Bar for RTS-370L 55 68399 Window-Shades Assembly for RTS-370L 83

Left Support of Evaporator Motor for RTS-370L

34 68383 Air Deector for RTS-370L 62

Dead Plate of Evaporator Motor for RTS-370L

Evaporator Extended Board for RTS370L

Right Support for Evaporator Motor for RTS-370L

Bottom Foam of Evaporator for RTS370L

High Pressure Copper Pipe for RTS370L

Pressing Plate of High Pressure Pipe for RTS-370L

Pan of High Temperature Pipe for RTS-370L

Supporting Plate of Window-Shades for RTS-370L

Stiffening Strip of Switch Panel for RTS-370L

61

64

66

68

70

71

73

84

86

14

Model RS-CN-0186 44379

Electrical Schematics

15

Electrical Schematics

Model RS-CN-0370-L 44544

16

Notes

________________________________________________________________________________________

17

Notes

________________________________________________________________________________________

18

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

https://omcan.com/warranty-registration/

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour di󰀨usion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

19

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 5,000 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 5,000 productos con origen a nivel mundial.

Omcan RS-CN-0186 Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual