Omcan IC-CN-0050 User Manual

Ice Shaver

Model IC-CN-0050

Item 43466

Instruction Manual

Revised - 06/26/2017

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Table of Contents

Model IC-CN-0050

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

-------------------------------------------------------------------------------------------- 8

--------------------------------------------------------------------------------------------- 9

----------------------------------------------------------------------------------- 9 - 11

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 7

Page

---------------------------------------------------------------------- 7 - 8

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

------------------------------------------------------------------------------------------- 16 - 18

----------------------------------------------------------------------------------- 12

---------------------------------------------------------------------------- 13 - 14

---------------------------------------------------------------------------- 15

---------------------------------------------------------------------------- 19

2

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

3

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

DANGER

Means that failure to heed this safety statement may result in severe personal injury or death.

4

Safety and Warranty

WARNING

Means that failure to heed this safety statement may result in extensive product damage, severe personal injury or death.

CAUTION

Means that failure to heed this safety statement may result in minor or moderate personal injury, or property or

equipment damage.

All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury, and let you know what would happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of re, electric shock or injury, when using your units, follow these basic

precautions:

• Plug into grounded 3-prong outlet.

• Do not remove grounding prong.

• Do not use an adapter.

• Do not use an extension cord.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFEGUARDS

Before the unit is used, it must be properly positioned and installed as described in this manual, so read the

manual carefully. The warranty may be affected or voided by an incorrect installation. To reduce the risk of re,

electrical shock or injury when using the appliance, follow basic precautions, including the following:

DANGER

• It is recommended that a separate circuit, serving only your appliance, be provided. Use receptacles that cannot be turned off by a switch or pull chain.

• Do not connect or disconnect the electric plug when your hands are wet.

• Never unplug by pulling on the power cord. Always grip the plug rmly and pull straight out from the outlet.

• Never clean the appliance parts with ammable uids. Do not store or use gasoline or other ammable vapors and liquids in the unit or in the vicinity of this or any other appliance. The fumes can create a re

hazard or explosion.

• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.

• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.

• Do not attempt to repair or replace any part of your appliance unless it is specically recommended in this manual. All other servicing should be done by a qualied technician.

WARNING

• The appliance must be installed with all electrical connections in accordance with state and local codes. A standard electrical supply as mentioned on the nameplate, properly grounded in accordance with the

5

Safety and Warranty

National Electrical Code and local codes and ordinances is required.

• Do not kink or pinch the power supply cord between the appliance and the cabinet.

• The fuse (or circuit breaker) size should be minimum 10 amperes for the appliance.

• It is important for the appliance to be well leveled for proper operation.

• Remove the packing materials and clean the appliance before using.

• If the appliance will not be used for a long time, before the next use it must be thoroughly cleaned. Follow

carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any solution inside the appliance after cleaning.

• DO NOT use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or discolor the interior. Use rubber gloves to protect hands.

• Carefully read the material safety instructions on the container of the appliance cleaner.

• Never allow children to operate, play with the appliance.

• DO NOT use this apparatus for other than its intended purpose.

ELECTRICAL CONNECTION

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal

safety, this appliance must be properly grounded. The power cord of this appliance is equipped with a

3-prong grounding plug that mates with a standard 3-prong grounding wall outlet to minimize the possibility

of electric shock hazard from the appliance. Have the wall outlet and circuit checked by a qualied electrician

to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered; it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance, this provides the best performance and also prevents overloading house wiring

circuits which could cause a re hazard from overheated wires. Never unplug your appliance by pulling on the power cord. Always grip the plug rmly and pull straight out from the outlet. When moving the appliance, be

careful not to damage the power cord.

EXTENSION CORD

Because of potential safety hazards under certain conditions, it is strongly recommended that you do NOT use an extension cord with this appliance.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see www.omcan.com/warranty.html for complete info.

6

Safety and Warranty

WARNING:

The packaging components (cardboard, polyethylene, and others) are classied as normal solid urban waste and can therefore be disposed of without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specications

1 Water leakage plate. 8 Lid. 2 Base unit. 9 Ice duct. 3 Foot. 10 Blade adjustment

knob.

4 Outer shell. 11 Melt water drain

outlet. 5 Power switch. 12 Drain pipe. 6 Handle. 13 Accessories. 7 Top cover. 14 Lock.

7

Technical Specications

Model IC-CN-0050 Voltage 115V / 60Hz

Power 200W Capacity (1 cubic inch) 70 cubes

Max. Ice Shaving Capacity per Minute

Dimensions 12.8” x 15.75” x 17.9” / 325 x 400 x 455mm Weight 33.7 lbs. / 15.3 kgs. Item Number 43466

16.5 lbs. / 7.5 kgs.

Installation

UNPACKING

Remove packaging materials

IMPORTANT: Do not remove any permanent instruction labels or the data labels on your appliance.

• Remove the appliance from the packaging. Make sure that all protective plastic lm and coatings are

thoroughly removed from all inner and outer surfaces.

• Do not use sharp instruments, rubbing alcohol, ammable uids, or abrasive cleaners to remove tape or

glue.

NOTE: Before using the appliance for the rst time, clean the internal cabinet with soapy water and sanitizing solution (See the Maintenance section of manual).

LOCATION REQUIREMENTS

Make sure the unit is installed on a at surface and in a stable condition while in use. Keep away at least 10” from the edge of the surface to reduce the risk of the unit falling. Keeping away from a heat source is essential.

NOTE: The appliance is for indoor use only.

8

Operation

• Open the lid, and clean the inside hopper with dry cloth. Then carefully press on the at surface of the blade to make sure it is well xed.

NOTE: It is extremely important that:

• WHEN CHECKING THE BLADE BE SURE THE UNIT IS LOW ENOUGH SO YOU MAY SEE INSIDE THE HOPPER. DO NOT REACH IN WITHOUT FULL VISIBILITY OF THE LOCATION OF THE BLADE.

• DO NOT TOUCH THE END OF THE BLADE. IT IS SHARP AND MAY RESULT IN SERIOUS INJURY.

• Before plug the power cord in please examine the cord, plug if there is any damage or hidden danger of

leakage, or the contact is good. The unit has power on demand and is always off.

• Open the lid and put in dened amount of ice cubes, then cover it. Kindly take note that the maximum of ice

cubes in the hopper should be at least 5cm deep from the top surface of the machine.

• Close the lid and Switch it on by the power switch on the side of the machine. For your safety, shaving will not start with lid open.

• You can adjust the size of ice ake from big to small by turning the adjusting knob.

• For its full utilization and optimum efciency, it is suggested that the diameter of the ice cubes should be

around 1”. Big ice should be hammered into small pieces to make sure the size is suitable.

IMPORTANT: DO NOT HAMMER ICE INSIDE OF THE HOPPER OR YOU MAY DAMAGE THE EQUIPMENT.

• If ice is stuck together in the hopper and will not separate with a gentle tap, carefully remove the ice in order to break it apart for standard operation.

Maintenance

WARNING

Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected.

CLEANING

• Switch off and disconnect from the power supply before cleaning.

• Clean the interior of the appliance as often as possible.

• Do not use abrasive cleaning agents. These can leave harmful residues.

• Always use mild soapy water to clean the interior of the appliance. Rinse thoroughly with fresh water and

wipe dry after cleaning.

SANITIZING SOLUTION

To sanitize the unit, prepare a sanitizing solution made with ½ oz of household bleach mixed with 1 gallon of

hot water. Wipe the hopper and water proong rings and blade let stand for at least 3 minutes. Rinse and dry

thoroughly.

Use extreme caution when cleaning the interior of the appliance. Sharp blade can cut and cause injury.

9

Maintenance

CLEANING AND SANITIZING PROCESS

• Open the locks by hand, remove the top cover (DRAWING-A).

• Detach the big water-proong ring, and then the small waterproong ring (DRAWING-B).

• Using a clean cloth, wipe the plate and rings and exert caution to avoid injuries from the blade (DRAWING-C).

CLEANING

1. Clean the big waterproong ring with mild soapy water and rinse thoroughly with fresh running tap water.

2. Clean the small waterproong ring with mild soapy water and rinse thoroughly with fresh running tap water.

3. Clean the interior of the appliance with mild soapy water and rinse thoroughly.

4. Wipe dries all parts that have been cleaned. Please exercise

caution when handling or cleaning near the blade (DRAWING-C).

SANITIZING

Disassemble the blade from the machine before performing this step (see Changing the Blades).

1. With the prepared sanitizing solution made with ½ oz of household bleach mixed with 1 gallon of hot water.

2. Wipe the hopper, the big water proong ring, the small

waterproong ring, and the blade and Ice duct and let stand for 3

minutes.

3. Apply the sanitizing solution to the drain outlet and let stand for 3 minutes.

4. Rinse all parts that were sanitized and dry them thoroughly.

5. Re-assemble the unit.

Note: Check the appliance again for safe and proper operation

after cleaning and reassembling.

10

CHANGING THE BLADES

Maintenance

PREPARING THE APPLIANCE FOR LONG STORAGE

CAUTION

If your appliance is left unused for a long time, before the next use it must be thoroughly cleaned. Follow carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any solution inside your appliance after cleaning.

If the appliance will not be used for a long time or is to be moved to another place:

• Shut off the electric supply at the main electrical power source.

• Clean the interior of the appliance.

11

Troubleshooting

Before taking the unit for servicing check the following:

• If the unit appears to be malfunctioning, read through the OPERATION section of this manual rst.

• If the problem persists, check the Troubleshooting Guide below. The problem may be simple and solvable

without servicing.

Problem Possible Cause Probable Correction

The appliance does not operate. No power. Connect the electric plug.

Overheat protection of motor. Wait for fall of temperature. The fuse in the outlet is blown. Replace fuse. The power switch is damaged. Replace power switch.

Unusual noise or vibrate excessively.

The appliance has not been installed in a level or stable position.

The xed bolt on the appliance is

loose. Ice cubes frozen together. Separate them with ice-wimble. Larger ice. Hammer into small pieces to make

Check installation position and change if necessary.

Screw down the bolt.

sure the size is suitable.

REFERENCE

Item Number Model Number Description Manufacturer Model Number

43466 IC-CN-0050 Ice Shaver 110V/60HZ/1 cETLus/ETL IS45

12

Model IC-CN-0050 43466

Parts Breakdown

13

Parts Breakdown

Model IC-CN-0050 43466

Item No. Description Position Item No. Description Position Item No. Description Position

61503 Metal Plate for IS45 1 61518 Axle for IS45 16 61533 Motor Protected Board for IS45 31

61504 Lid for IS45 2 61519 Small Belt Pulley for IS45 17 61534 Blade Adjustment Knob for IS45 32

61505 Cotter Pin for IS45 3 61520 Bearing for IS45 18 61535 Blade Bottom Holder for IS45 33

61506 Top Cover for IS45 4 61521 Belt for IS45 19 61536 Blade Top Holder for IS45 34

61507 Big Water Proong Ring for IS45 5 61522 Big Belt Pulley for IS45 20 61537 Support for IS45 35

61508 Small Water Proong Ring for IS45 6 61523 Handle for IS45 21 61538 Spring for IS45 36

61509 Impeller for IS45 7 61524 Back Shell for IS45 22 61539 Blade for IS45 37

61510 Bearing for IS45 8 61525 Lock for IS45 23 61540 Support for IS45 38

61511 Main Unit for IS45 9 61526 Capacitor for IS45 24 61541 Inner Drain Pipe for IS45 39

61512 Pole for IS45 10 61527 Foot for IS45 25 61542 Front Shell for IS45 40

61513 Bushing for IS45 11 61528 Base Plate for IS45 26 61543 Ice Duct for IS45 41

61514 Microswitch Holder for IS45 12 61529 Drain Pipe for IS45 27 61544 Power Switch for IS45 42

61515 Microswitch for IS45 13 61530 Melt Water Drain Outlet for IS45 28 61545 Power Supply Code for IS45 43

61516 Motor Base for IS45 14 61531 Base Unit for IS45 29 61546 Wiring Harness for IS45 44

61517 Motor for IS45 15 61532 Shutter for IS45 30

14

Model IC-CN-0050 43466

Electrical Schematics

15

Notes

________________________________________________________________________________________

16

Notes

________________________________________________________________________________________

17

Notes

________________________________________________________________________________________

18

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

www.omcan.com/warrantyregistration.html

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour diffusion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

19

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 3,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 3,500 productos con origen a nivel mundial.

Omcan IC-CN-0050 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual