Omcan CE-CN-0004-C Service Manual

Convection Oven

Model CE-CN-0004-C

Item 44307

Instruction Manual

Revised - 03/10/2020

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Table of Contents

Model CE-CN-0004-C

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

--------------------------------------------------------------------------------------- 6 - 7

----------------------------------------------------------------------------------------- 7 - 8

----------------------------------------------------------------------------------------- 8

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 6

Page

-------------------------------------------------------------------------- 6

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

------------------------------------------------------------------------------------------- 12 - 14

-------------------------------------------------------------------------------- 8 - 9

----------------------------------------------------------------------------- 9 - 10

---------------------------------------------------------------------------- 11

---------------------------------------------------------------------------- 15

2

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

3

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions carefully and completely.

2. For commercial use only.

3. Do not touch hot surfaces.

4. Protect against electrical shock by keeping all cords, plugs, and other electrical components away from

water or other liquids.

5. Unplug this unit when not in use and before cleaning.

4

Safety and Warranty

6. Allow the unit to cool before putting on or taking o󰀨 parts.

7. Do not operate this or any appliance with a damaged electrical cord or plug.

8. Do not operate this or any appliance after it has malfunctioned or been damaged in any way.

9. Do not use outdoors.

10. Do not place on or near a hot gas or electric burner.

11. Attach plug to appliance rst, then plug electrical cord into the wall outlet.

12. Disconnect the unit by turning the temperature and timer control to “OFF”, then removing the electrical plug from the wall outlet.

13. Do not use appliance for any application other than intended use.

14. Do not insert metal utensils or over sized foods into this unit as they may cause a re and heighten the risk of electrical shock.

15. Do not store any item on top of this unit when in operation.

16. Do not allow this oven to touch or be covered by ammable material, such as curtains, draperies, walls, etc., when in operation.

17. Do not clean with metal scouring pads as pieces can break o󰀨 and touch electrical components, heightening the risk of electrical shock

18. Never place materials such as paper, cardboard, plastic, etc. in this oven.

19. Do not cover interior of this unit with metal foil as it may cause the oven to overheat.

20. Avoid scratching the surface or nicking the edges of this unit’s tempered, safety glass door. If the oven door has a scratch or nick, contact customer service before use.

21. Turn the appliance o󰀨 by turning the temperature and timer control to the “OFF” position.

22. Note that the use of accessories not recommended by the manufacturer may result in injury.

23. Children should be supervised to ensure that they do not play with the oven.

24. This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

25. When using the appliance in shops, snack bars, hotels etc., check the voltage and outlet to make sure the appliance is correctly connected with power.

26. Place unit on a at surface that is well ventilated. The appliances must be supervised during operation, DO

NOT leave appliance without powering o󰀨.

NOTE: Save these instructions for future reference.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop o󰀨 to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

5

Safety and Warranty

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of without di󰀩culty.

In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specications

Model CE-CN-0004-C Power 4500 W Number of Racks 4 Pans Size* Full Size - 26” x 18.1” x 1” / 660 x 460 x 25mm

Temperature Range 65 - 300°C / 150 - 500°F Capacity 100 L / 3.53 cu. ft. Electrical 220V / 60Hz / 1 Adjustable Timer 0 - 120 minutes Weight 100.5 lbs. / 45.6 kgs.

Packaging Weight 126 lbs. / 57.2 kgs.

Dimensions 31.8” x 28.8” x 22.8” / 807 x 732 x 578mm

Packaging Dimensions 37” x 32.5” x 26.2” / 940 x 825 x 665mm

Item Number 44307

*Pans not included.

Installation

All electrical connections must comply with specication and power standard, the installation operation must be done by qualied personnel.

All models are countertop type, put the oven in a at surface, and leave enough space (suggested 100mm / 4” on all sides) for the air ventilation.

The oven comes with a humidity control function, please install the oven close to a water source and connect

6

Installation

the faucet well before operating.

Before cooking anything in your oven for the rst time, please follow these simple instructions:

• Using a small amount of detergent, wash the handle and roasting racks with soapy water. (NOTE: Do not use a spray or abrasive polishing agent.) Gently wipe down interior walls with a damp cloth.

While washing this unit, do not to touch the electric heating element. Do not soak the inside of the oven with water.

• After washing and thoroughly drying the surfaces noted above, place the roasting racks back inside the oven.

• Close the oven door and preheat the oven to its highest temperature setting for 5 minutes.

• Turn o󰀨 the heating elements and open the oven door in order to remove any smoky residue from inside the oven. The heating elements are well lubricated and this initial use will help burn o󰀨 the extra grease. A

light amount of smoke is normal during this process.

Operation

To start your oven, you need to turn on the temperature dial to set your desired cooking temperature, and turn on the timer dial to set the cooking time.

Push the humidity button to get the desired humidity for the foods

CAUTION: During the baking process, make sure that no metal accessory comes in contact with the

electric heating elements.

CAUTION: Foods baked in this oven will be hot. Wear protective hand coverings when reaching into

oven to retrieve food.

TIMER

The range of the timer on this unit is 0-120 minutes. Turning the timer to the “0” position, the timer will “ding” to alert. If you need to reset the baking time while the oven is in operation, simply turn the timer to a new position.

The oven will reset the time according to the revised requirement without needing to be turned o󰀨.

TEMPERATURE CONTROL KNOB

The temperature range of this unit is 150-550°F. This thermostatic switch controls the temperature inside the oven and helps to maintain the proper temperature during various heating, roasting, and baking applications.

POWER AND TEMPERATURE INDICATOR LIGHT

Anytime this appliance is connected to the power supply with the temperature knob turned on, the power and heating indicator light will be on and the fan motor will begin to operate.

PROTECTION COMPONENT

If the temperature of this oven reaches an unsafe limit, the electrical components will shut o󰀨 and it will stop

operating in order to prevent overheating.

7

Operation

TYPICAL OPERATION SEQUENCE

Action Result

Plug in your oven. Power is connected but power light will go on after

turning the temperature dial.

Adjust temperature control knob. Heating indicator light comes on; heating elements

begin to heat up. Temperature light shuts o󰀨. Oven has reached desired temperature. Load product into oven. Product will begin to cook. Set timer to desired cook time between 0-120 min. Timer starts timing down. Timer reaches zero. Timer chimes. Unload oven. Product will be cooked/hot; use caution removing it

from the oven.

Maintenance

To clean, rst remove the power cord’s plug from the wall outlet. Wait for the oven to cool. Use a damp cloth

or sponge to gently wipe down the inside of the oven. Avoid soaking the inside of the oven or washing it in running water as this will cause serious damage to the unit.

Troubleshooting

PROBLEM: THE OVEN DOES NOT BECOME HOT AFTER BEING SWITCHED ON.

• Be sure that the timer switch is set.

• Be sure that the temperature control knob is set.

PROBLEM: THERE IS A METALLIC SOUND WHEN THE OVEN IS IN USE.

• Do not attempt to dismantle the oven.

• Contact your service agent right away to examine the fan.

PROBLEM: FOOD IS OFTEN OVERCOOKED OR BURNED, EVEN WHEN COOKED ACCORDING TO THE RECIPE.

• Check that the fan motor is operating normally.

• Contact your service agent to examine the temperature control knob.

8

REFERENCE

Troubleshooting

Item Number Model Number Description

Convection Oven 220V/60/1 4.6 KW with

44307 CE-CN-0004-C

4 Full Size Chrome Shelves Manual/

Humidity Control cETLus ETL Sanitation

Model CE-CN-0004-C 44307

Manufacturer Model

Number

FD-100

Parts Breakdown

9

Parts Breakdown

Model CE-CN-0004-C 44307

Item No.

67238 Power Cord for FD-100 1 67256 Tray Grid for FD-100 17 67276 Door Seal for FD-100 37

67239 Wire Buckle for FD-100 2 67257 Interior for FD-100 18 67277 Control Panel for FD-100 38

67240 Space Holder for FD-100 3 67258 Bottom Plate for FD-100 19 67278 Grid Screws for FD-100 39

67241 Rear Board for FD-100 4 67259 Feet for FD-100 20 67279 Hinge Assembly for FD-100 40

67242 Fan Motor Clockwise for FD-100 5 67260 Control Box for FD-100 21 67280 Shell for FD-100 41

67243

67244 Temperature Limiter for FD-100 6 67262 Thermostat Knob for FD-100 23, 26 67282 Internal Light for FD-100 43

67245 Motor Base for FD-100 7 67263 Heating Light for FD-100 24, 25 62246 Exhaust Pipe for FD-100 44

67246 AC Contactor for FD-100 8 67266 Door Trim for FD-100 27 67284 Water Pipe Fixture for FD-100 45

67247 Terminal for FD-100 9 67267 Right Door Frame for FD-100 28 67285 Water Pipe Joint for FD-100 46

67248 Middle Board for FD-100 10 67268 Outer Glass for FD-100 29 67286 Solenoid Valve for FD-100 47

67249 Fan Blade Clockwise for FD-100 11 67269 Front Door Frame for FD-100 30 67287 Timer for FD-100 48

67250

67251 Heating Element for FD-100 12

67252 Wind Plate for FD-100 13 67272 Baking Tray for FD-100 33 67290 Insulation Wire for FD-100 51

67253 Connection Pole for FD-100 14 67273 Left Door Frame for FD-100 34 62255 Motor Insulation for FD-100 52

67254 Water Spray Pipe for FD-100 15 67274 Inner Glass for FD-100 35

67255 Connection Plate for FD-100 16 67275 Insulation for FD-100 36

Description Position

Fan Motor Counter-Clockwise for FD-100

Fan Blade Counter-Clockwise for FD-100

5 67261 Humidity Control Switch for FD-100 22 67281 Sensor Fixture for FD-100 42

11 67270 Handle for FD-100 31 67288 Thermostat for FD-100 49

Item No.

67271 Full Size Sheet Pan for FD-100 32 67289 Switch Bottom for FD-100 50

Description Position

Item No.

Description Position

10

Model CE-CN-0004-C 44307

Electrical Schematics

11

Notes

________________________________________________________________________________________

12

Notes

________________________________________________________________________________________

13

Notes

________________________________________________________________________________________

14

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

https://omcan.com/warranty-registration/

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour di󰀨usion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

15

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 5,000 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 5,000 productos con origen a nivel mundial.

Omcan CE-CN-0004-C Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual