Blenders
Models BL-BR-0015, 0025
Items 37969, 31502
Instruction Manual
Revised - 05/25/2018
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: service@omcan.com
www.omcan.com
Table of Contents
Model BL-BR-0015 / Model BL-BR-0025
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
--------------------------------------------------------------------------------------- 7 - 8
----------------------------------------------------------------------------------------- 8 - 9
----------------------------------------------------------------------------------- 9 - 11
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 6
Page
-------------------------------------------------------------------------- 7
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
------------------------------------------------------------------------------------------------ 18
---------------------------------------------------------------------------- 12 - 15
---------------------------------------------------------------------- 16 - 17
---------------------------------------------------------------------------- 19
2
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
3
General Information
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
Safety and Warranty
The High Performance Tilting Blenders are simple to use and clean. However, for your safety read the
following instructions in order to avoid accidents:
1. Always unplug the machine when cleaning, servicing or when any other maintenance operation is needed.
2. Never use tools that do not belong to the machine during operation.
3. Never spray water on the machine.
4. Do not operate the machine while wearing wet clothes or wet shoes.
5. Before operating the machine, make sure it is properly grounded.
4
Safety and Warranty
6. When washing inside of the Cup Nº02 (Pic. 01) ensure power is off and unit is unplugged. Be careful with
the blade as it has sharp edges.
GENERAL SAFETY PRACTICES
The following safety instructions are addressed to both the operator of the machine as well as the person in
charge of maintenance. The user shall operate the machine only after being well acquainted with the safety
procedures described in the present manual. READ THIS MANUAL THOROUGHLY.
BASIC OPERATION PRACTICES
Dangerous parts
Some parts of the electric devices are connected to high voltage points. These parts when touched may cause
severe electrical shocks or can even be FATAL. Never touch commands such as buttons, switches and knobs
with wet hands, wet clothes and/or shoes. By not following these instructions, operators could be exposed to
severe electrical shocks or even to a FATAL situation.
Warnings
The operator has to be well familiar with the position of ON/OFF Switch to make sure the Switch is easily
accessible when necessary. Before any kind of maintenance, physically remove plug from the socket. Provide
space for a comfortable operation thus avoiding accidents. Water or oil spilled on the oor will cause additional
hazards. Make sure the oor is clean and dry. Before giving any manual command (switch, buttons, turn keys
or lever) be sure the command is the correct one. Check this manual for further details if necessary. Never
use a manual command (switch, buttons, lever) unadvisedly. If any work is to be made by two or more people,
coordination signs will have to be given for each operation step. Every step of the operation shall be taken only
if the sign has been made and responded.
Advices
In case of power shortage, immediately turn the machine OFF. Use recommended or equivalent lubricants, oils
or greases. Avoid mechanical shocks as they may cause failures or malfunction. Avoid penetration of water,
dirt or dust into mechanical or electrical components of the machine. DO NOT MODIFY original characteristics
of the machine. DO NOT REMOVE, TEAR OFF or MACULATE ANY SAFETY or IDENTIFICATION LABELS
stuck on the machine. If any label has been removed or is no longer legible, contact your nearest dealer for
replacement.
5
Safety and Warranty
SAFETY PROCEDURES AND NOTES BEFORE SWITCHING MACHINE ON
IMPORTANT: Carefully read ALL INSTRUCTIONS of this manual before turning the machine ON. Be
sure to be familiar with the instructions and that you have understood all information contained in this
manual. If you have any questions contact your supervisor or your nearest Dealer.
Danger
An electric cable or electric wire with damaged jacket or bad insulation could cause electrical shocks as well as
electrical leak. Before use, unplug and check conditions of all wires and cables.
Advices
Be sure ALL INSTRUCTIONS in this manual have been thoroughly understood. Every function and operational
procedure have to be very clear to the operator. Contact your nearest Dealer for further questions. Any manual
command (switch, button or lever) shall be given only after being sure it is the correct one.
Precautions
The electric cable has to be compatible with the power required by the machine. Cables touching the oor or
close to the machine need to be protected against short circuits.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components (cardboard, polyethylene, and others) are classied as normal solid urban waste
and can therefore be disposed of without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
6
Technical Specications
MAIN COMPONENTS
All components are made with carefully selected materials, in accordance with Omcan experience and
standard testing procedures.
01- Lid
02- Cup
03- On/Off Switch
04- Stand
05- Motor
06- Lock Pedal
Picture 1
Model BL-BR-0015 BL-BR-0025
HP 1.5
Cup Capacity 15 L / 16 QT 25 L / 26 QT
Rotation 3500
Electrical 110V/60/1
Weight 41.75 lbs. / 18.9 kgs. 45.2 lbs. / 20.5 kgs.
Packaging Weight 65 lbs. / 29.5 kgs. 70.3 lbs. / 31.9 kgs.
Dimensions
Packaging Dimensions
Item Number 37969 31502
20.75” x 14.25” x 41.75”
527 x 362 x 1060mm
23” x 16” x 44”
584 x 406 x 1118mm
20.9” x 16.1” x 46.5”
531 x 409 x 1181mm
23” x 16” x 50”
584 x 406 x 1270mm
Installation
The High Performance Tilting Blenders were developed to be used in 110V. Grounding is mandatory.
7
Installation
PRE OPERATION
First of all check if the Blender is rm on its position. Check if Motor (Nº01) is perfectly tted on the Lock Pedal
(Nº02) as shown on Picture 2.
01 - Motor
02 - Pedal Lock.
Picture 2
IMPORTANT: Before doing any maintenance to the machine switch it OFF and unplug it.
Operation
STARTING
The Blender is activated by turning the On/Off Switch Nº03 (Pic.01) to ON position.
OPERATING PROCEDURES
The High Performance Tilting Blender works at high speed (approximately 3.500 rpm, 50Hz). To feed it
proceed as follows:
1. Remove the Lid Nº01 (Pic.01).
2. Put product inside the Cup Nº02 (Pic.01) with the machine switched OFF.
3. Place the Lid Nº01 (Pic.01) back on top of the Cup and switch the machine ON.
NOTE: Due to turbulence generated when machine is ON do not turn it ON without the Lid Nº01
(Pic.01). The processing time depends on the kind of product.
IMPORTANT: NEVER SWITCH THE MACHINE ON WITHOUT PRODUCT IN IT BECAUSE IT WILL CAUSE
IRREPARABLE DAMAGES.
IMPORTANT: It is not recommended to blend products without the addition of any liquid, otherwise it
will overheat and damage the Cup seal.
8
DISCHARGING PROCEDURES
To discharge processed product from Blender Models
proceed as follows:
1. Turn machine OFF.
2. Remove Lid Nº01 (Pic. 01).
3. Press Lock Pedal Nº06 (Pic. 01) down.
4. Tilt Cup Nº02 (Pic. 01) holding its handle and discharge
processed product as needed.
Operation
Maintenance
CLEANING
The new Blenders cup has stamped ribs that facilitate cleaning. Wash the Lid Nº01 and the Cup Nº02 (Pic. 01)
with water and neutral soap. Wipe up the other parts with a damp cloth.
IMPORTANT: Never do cleaning with machine plugged in. Always unplug machine before cleaning.
When washing inside the Cup be careful with the blade.
MAINTENANCE
Danger
Any maintenance with the machine in working situation is dangerous. TURN IT OFF BY PULLING THE PLUG
OFF THE SOCKET DURING MAINTENANCE.
IMPORTANT: Always unplug the machine when emergency cases arise.
Advice
Electrical or mechanical maintenance must be done by qualied personal for such operation. Person in charge
has to be sure that the machine is under TOTAL SAFETY conditions when working.
ROUTINE INSPECTION - UNPLUG MACHINE
Advice
When checking the tension of the belts or chains, DO NOT introduce your ngers between the belts and the
9
Maintenance
pulleys and nor between the chain and the gears.
Precautions
Check if motors and sliding or turning parts of the machine produce abnormal noises. Check the tension of the
belts and chains and replace the set when belt or chain show signs of being worn out. When checking tensions
of belts or chain DO NOT introduce your ngers between belts and pulleys, nor between the chains and gears.
Check protections and safety devices to make sure they are working properly.
OPERATION
Advice
Be sure your hair is not loose in order to avoid getting caught by turning parts which could lead to a serious
accident. Tie your hair up and/or cover your head with a scarf. The operation performed by untrained personnel
shall be forbidden. Never touch turning parts with your hands or in any other way. NEVER operate machine
without all original safety devices under perfect conditions.
CAUTIONS WITH STAINLESS STEEL:
The Stainless Steel may present rust signs, which ARE ALWAYS CAUSED BY EXTERNAL AGENTS,
especially when the cleaning or sanitization is not constant and appropriate. The Stainless Steel resistance
towards corrosion is mainly due to the presence of chrome, which in contact with oxygen allows the formation
of a very thin protective coat. This protective coat is formed through the whole surface of the steel, blocking
the action of external corrosive agents. When the protective coat is broken, the corrosion process begins,
being possible to avoid it by means of constant and adequate cleaning. Cleaning must always be done
immediately after using the equipment. For such end, use water, neutral soap or detergent, and clean the
equipment with a soft cloth or a nylon sponge. Then rinse it with plain running water, and dry immediately with
a soft cloth, this way avoiding humidity on surfaces and especially on gaps. The rinsing and drying processes
are extremely important to prevent stains and corrosion from arising.
IMPORTANT: Acid solutions, salty solutions, disinfectants and some sterilizing solutions
(hypochlorites, tetravalent ammonia salts, iodine compounds, nitric acid and others), must be
AVOIDED, once it cannot remain for long in contact with the stainless steel.
These substances attack the stainless steel due to the CHLORINE on its composition, causing corrosion
spots (pitting). Even detergents used in domestic cleaning must not remain in contact with the stainless steel
longer than necessary, being mandatory to remove it with plain water and then dry the surface completely.
Use of abrasives:
Sponges or steel wool and carbon steel brushes, besides scratching the surface and compromising the
stainless steel protection, leave particles that rust and react contaminating the stainless steel. That is why such
products must not be used for cleaning and sanitization. Scrapings made with sharp instruments or similar
must also be avoided.
Main substances that cause stainless steel corrosion:
Dust, grease, acid solutions such as vinegar, fruit juices, etc., saltern solutions (brine), blood, detergents
10
Maintenance
(except for the neutral ones), common steel particles, residue of sponges or common steel wool, and also
other abrasives.
ANALYSIS AND PROBLEMS SOLVING
Problems, causes and solutions
The High Performance Tilting Blenders were designed to operate with the need of minimum maintenance but
the natural wearing caused by long use of the equipment may occasionally cause some malfunctions. If such
problem occurs with your Blender refer to Table below in which the most common situations are listed with
recommended solutions.
Problems Causes Solutions
The machine does not turn on. Lack of power. Check if machine is plugged in
and if there is power in the power
supply source.
Problem in the electric circuit of the
machine.
Cup is leaking. Damaged seal. Call technical assistance.
Call technical assistance.
REFERENCE
Item Number Model Number Description Manufacturer Model Number
37969 BL-BR-0015
31502 BL-BR-0025
Blender Tilting 15 L / 4 Gal
1.5 HP / 1119 W 110V/60/1
Blender Tilting 25 L / 7 Gal
1.5 HP / 1119 W 110V/60/1
LAR-15
LAR-25
11
Parts Breakdown
Model BL-BR-0015 37969
12
Model BL-BR-0015 37969
Parts Breakdown
Item
Description Position
No.
38109 Skymsen Logo Small for LAR-15PMB 00047.7 30045 Bracer K22-LM(T-80I) for LAR-15PMB 12469.9 38299 Pedal (Grey) for LAR-15PMB 34320.0
30234 Washer L 1/4x1 6 ZB for LAR-15PMB 00100.7 38208 Wire Passer Molde 0922231 for LAR-15PMB 13737.5 27754
38217 Elastic Pin 6x22 for LAR-15PMB 00212.7 38292 Screw M6x8 DIN 84 ZB for LAR-15PMB 14174.7 38322 Rubber Foot for LAR-15PMB 34895.3
30186 Wire Passer Molde 0922231 for LAR-15PMB 00218.6 16434 Motor 1.5HP 60HZ 110V for LAR-15PMB 14211.5 38202 Motor Support for LAR-15PMB 35057.5
16395 Lock Pin for LAR-15PMB 00267.4 38319 Distance Washer for LAR-15PMB 14644.7 79052 CS Easel Gray for LAR-15PMB 35111.3
Six Sided Screw UNC 3/8 x 7/8 RTZB for
30324
LAR-15PMB
27692 Insult Term EF-4228 for LAR-15PMB 01213.0 38314 Lower Nut M22x1.5 for LAR-15PMB 14653.6 38289 Plastic Conduit for LAR-15PMB 35613.1
30350 Nylon Cover CN-4472 for LAR-15PMB 02031.1 38295 Fiber Washer 20x13x0.7 for LAR-15PMB 14654.4 79055 Sleeve for LAR-15PMB 39691.5
38557 Screw Nut DIN 934 ZB for LAR-15PMB 02729.4 38312 Nut 10x1.25 for LAR-15PMB 14660.9 70157 Cap Cover for LAR-15PMB 40753.4
27693 Washer L.A8.4 ZB for LAR-15PMB 02730.8 38308 Complete Clutch for LAR-15PMB 15815.1 38215 Lid for LAR-15PMB 40774.7
38180 Screw Nut M6 DIN 934 ZB for LAR-15PMB 03099.6 38316 Cover for LAR-15PMB 17456.4 27845 Blade for LAR-15PMB 40830.1
38320 Nut M5 DIN 934 ZB for LAR-15PMB 03145.3 79037 Positive Terminal Lock for LAR-15PMB 17581.1 38214 CS Cup for LAR-15PMB 40857.3
27695 Allen Screw M6x8 for LAR-15PMB 03188.7 30050 Terminal Cover for LAR-15PMB 17582.0 38213
24023 The Spring Rocker for LAR-15PMB
38220 Distanc. Washer for LAR-15PMB 05041.5 79041 Bafe for LAR-15PMB 19148.5 38315 Center Axis for LAR-15PMB 40868.9
38297 PFS M8x40 DIN 933 ZB for LAR-15PMB 09008.5 38087 Washer L.A5.3 DIN 125 INOX for LAR-15PMB 20194.4 38284
Cord 3x1 5mm2 with PGRE 2PC1PR for
38171
LAR-15PMB
38318 Bearing Seal Ring for LAR-15PMB 09167.7 27720 Omcan Logo (Machines) for LAR-15PMB 27154.3 79065
38296 Washer L A10.5 ZB for LAR-15PMB 09338.6 38302 PFS Auto BROC 4.2x13 ZB for LAR-15PMB 29442.0 78551
16419 Washer L.A6 4 125 INOX for LAR-15PMB 12442.7 45648
00711.0 38317 Central Bearing with Bush for LAR-15PMB 14650.1 38288 Motor Support (Grey) for LAR-15PMB 35112.1
04870.4 27709 Screw M8x16 DIN 933 ZB for LAR-15PMB 19059.4 79061 Bearing Complete for LAR-15PMB 40867.0
09104.9 38313 Seal V-Ring 16.5x10.5x5.5 for LAR-15PMB 20378.5 38300
Item
Description Position
No.
On/Off Switch Black C/PROT.30223 M2FT2FE3V for LAR-15PMB
Item
Description Position
No.
Maintenance/Cleaning Label Comm for
LAR-15PMB
Complete Bearing Set with Beaker for
LAR-15PMB
CS Tilting Base Support (Grey) for LAR15PMB
PE Rectangular (MOL 483753) for LAR15PMB
CB. Ground 1.5mm 2x420mm for LAR15PMB
Cleaning Maintenance Label for LAR15PMB
30565.0 79067 Pedal Separator for LAR-15PMB 51024.6
34686.1
40866.2
41009.8
46767.7
48415.6
50665.6
13
Parts Breakdown
Model BL-BR-0025 31502
14
Model BL-BR-0025 31502
Parts Breakdown
Item
Description Position
No.
38109 Skymsen Logo Small for LAR-25PMB 00047.7 30045 Bracer K22-LM(T-80I) for LAR-25PMB 12469.9 38299 Pedal (Grey) for LAR-25PMB 34320.0
30234 Washer L 1/4x1 6 ZB for LAR-25PMB 00100.7 38208 Wire Passer Molde 0922231 for LAR-25PMB 13737.5 27754
38217 Elastic Pin 6x22 for LAR-25PMB 00212.7 38292 Screw M6x8 DIN 84 ZB for LAR-25PMB 14174.7 38322 Rubber Foot for LAR-25PMB 34895.3
30186 Wire Passer Molde 0922231 for LAR-25PMB 00218.6 16434 Motor 1.5HP 60HZ 110V for LAR-25PMB 14211.5 38202 Motor Support for LAR-25PMB 35057.5
16395 Lock Pin for LAR-25PMB 00267.4 38319 Distance Washer for LAR-25PMB 14644.7 79052 CS Easel Grey for LAR-25PMB 35111.3
Six Sided Screw UNC 3/8x7/8 RTZB for
30324
LAR-25PMB
27692 Insult Term EF-4228 for LAR-25PMB 01213.0 38314 Lower Nut M22x1.5 for LAR-25PMB 14653.6 38289 Plastic Conduit for LAR-25PMB 35613.1
30350 Nylon Cover CN-4472 for LAR-25PMB 02031.1 38295 Fiber Washer 20x13x0.7 for LAR-25PMB 14654.4 79055 Sleeve for LAR-25PMB 39691.5
38557 Screw Nut DIN 934 ZB for LAR-25PMB 02729.4 38312 Nut 10x1.25 for LAR-25PMB 14660.9 70157 Cap Cover for LAR-25PMB 40753.4
27693 Washer L.A8.4 ZB for LAR-25PMB 02730.8 38308 Complete Clutch for LAR-25PMB 15815.1 65872 Cover 25 (FE006-112) for LAR-25PMB 40775.5
38180 Screw Nut M6 DIN 934 ZB for LAR-25PMB 03099.6 38316 Cover for LAR-25PMB 17456.4 27845 Blade for LAR-25PMB 40830.1
38320 Nut M5 DIN 934 ZB for LAR-25PMB 03145.3 79037 Positive Terminal Lock for LAR-25PMB 17581.1 38304 Cup Set for LAR-25PMB 40859.0
27695 Allen Screw M6x8 for LAR-25PMB 03188.7 30050 Terminal Cover for LAR-25PMB 17582.0 79061 Bearing Complete for LAR-25PMB 40867.0
24023 Spring Rocker for LAR-25PMB 04870.4
38220 Distanc. Washer for LAR-25PMB 05041.5 79041 Bafe for LAR-25PMB 19148.5 38303 Complete Cup for LAR-25PMB 40872.7
38297 PFS M8x40 DIN 933 ZB for LAR-25PMB 09008.5 38087 Washer L.A5.3 DIN 125 INOX for LAR-25PMB 20194.4 38284
Cord 3x1 5mm2 with PGRE 2PC1PR for
38171
LAR-25PMB
38318 Bearing Seal Ring for LAR-25PMB 09167.7 27720 Omcan Logo (Machines) for LAR-25PMB 27154.3 79065
38296 Washer L A10.5 ZB for LAR-25PMB 09338.6 38302 PFS Auto Broc 4.2x13 ZB for LAR-25PMB 29442.0 78551
16419 Washer L.A6 4 125 Inox for LAR-25PMB 12442.7 45648
00711.0 38317 Central Bearing with Bush for LAR-25PMB 14650.1 38288 Motor Support (Grey) for LAR-25PMB 35112.1
09104.9 38313 Seal V-Ring 16.5x10.5x5.5 for LAR-25PMB 20378.5 38300
Item
Description Position
No.
27709 Screw M8x16 DIN 933 ZB for LAR-25PMB 19059.4 38315 Center Axis for LAR-25PMB 40868.9
On/Off Switch Black C/PROT.30223 M2FT2FE3V for LAR-25PMB
30565.0 79067 Pedal Separator for LAR-25PMB 51024.6
Item
Description Position
No.
Maintenance/Cleaning Label Comm for
LAR-25PMB
CS Tilting Base Support (Grey) for LAR25PMB
PE Rectangular (MOL 483753) for LAR25PMB
CB. Ground 1.5mm 2x420mm for LAR25PMB
Cleaning Maintenance Label for LAR25PMB
34686.1
41009.8
46767.7
48415.6
50665.6
15
Electrical Schematics
Model BL-BR-0015 37969
16
Model BL-BR-0025 31502
Electrical Schematics
17
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
18
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specied below. You can also register online by visiting:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
www.omcan.com/warrantyregistration.html
For mailing in Canada
Pour postale au Canada
Por correo en Canadá
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
For mailing in the US
Pour diffusion aux États-Unis
Por correo en los EE.UU.
OMCAN
Niagara Falls, New York
USA, 14305
or email to: service@omcan.com
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan
19
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 3,500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 3,500 productos con origen a nivel mundial.
Loading...