Omcan BL-020B Instruction Manual

High Performance Commercial Blender

Owner’s Manual

Model: BL-020B

Read and Save These Instructions

Important Safeguards

1. Read all instructions.

2. To protect again st r isk of electrical shock, do not put motor base in water or other liquid.

3. Close adult supervision is necessary when the appliance is use d by or near children.

4. Unplug the power cord from the wall outlet when the ma chine is not in use. Unplug before putting on
or taking off par ts, and before cleaning other than washing the container.

5. Never touch or make cont act with moving parts.

6. Do not operate any appliance with a damaged cord or plug; or after the appliance malfunctions; or is
dropped or damaged in any manner. Call service at once for possible replacement, examination,
and repair, electrical or mechanical adjustment.

7. Do not use outdoors.

8. Do not let the power cord hang over edge of table or counter, or touch hot sur f aces .

9. Keep hands and utensils out of the container while motor is running to prevent the possibility of
severe personal injury and/or damage to the blender. A rubber scraper may be used, but only when
the blender is not running.

10. CAUTION: Blade is sharp. Handle carefully .

 Never try to remove blade w hile c ontainer is sitting on the motor base.
 Do not operate with loose or da mag ed blades.
 To reduce the risk of personal injury, never place blade assembly on motor base without the

blender container properly attached.

11. Always operate with the lid in place.

12. Display window area will scratch when contacted with a scouring pad or sharp object. Use a soft
cloth to wipe the control panel area clean.

Features

This blender was developed based on years of experience and technology. The powerful motor with
stainless steel blades are designed for blending various foods.

 The Industrial high-speed motor can reach a maximum speed of 29,000 rpm
 The thermally protected m ot or is Fan cooled.
 The speed control is desig ned t o pr ovide a steady current, while protecting the motor.
 Over current protection system.
 Durable Stainless steel driven c onnect or.
 Blades group is geared by ball b earings.
 Built with spe cial durab le mater ials an d w aterpr oo f adhesiv e

.

Operation Instruction

Fruit Smoothies

1. Ingredients: Ice, Fruits, Wat er. They are all necessary.

2. Put the material into the container; cover with the lid; when make thick drinks, please insert the
blending stick.

3. Set the variable button to a hig h speed (or the highest speed.)

4. Turn on the un it; if water is limited, please use the blending stick.

5. After 3-5 seconds, when the blending sound suddenly diminishes, the ingredients have been
blended enough. Over blending will cause turn the ice into water.

Blending Fruit & Vegetable

1. Put fruit or vegetable and little water into the container.

2. Set medium speed or high speed.

3. Turn on the unit; after 4 -6 seconds of blending, the ingredients should roll smoothly. Do not over
blend.

Note:

1. Inching switch is m ainly for testing or blending special materials do not use i t frequently.

2. Do not run more than 2 minutes when blendi ng dry materials .

Control Panel

Mechanical Control Panel

ON/OFF Switch

Up for ON; Down for OFF.

HIGH/LOW Pulse Switch

Up for High speed at 29000rp m; Down for Low speed at 16000rpm.
Pulse button can only be used when the power switch is ON, The PULSE switch can be used to quickly
refresh product in the container by depressing the switc h and holding down as long as needed.

Variabl e S peed Dial

It allows the user to select contin uous variable speeds ranging from 16000rpm to 29000rpm.
The PULSE switch overrides the variable speed dial.

Remark:

1. On all units the built-in thermal sensor keeps track of how hot the motor gets and will

automatically shut down the motor if it is overheating. User should remove the container and
wait until the machine cools down. This takes about 2 minutes.

2. Special Note:

Please check your operation when the motor is overheated. If the machine runs all day or the
material is too thick, it can easily overheat.

Specification

Voltage

110V-120V /60Hz

Capacity

2000c.c

Endurance of Container

-40℃~180℃

Power

1300W

Weight

5.5kgs

Length of Cord

1.8M

Dimension

200x230x490mm

Protector

Current protector, The rmal protector for m otor

*110V-120V machine is available in 15A plug.