Omcan 44007 Instruction Manual

Manual Meat Slicer

Model MS-IT-0319-M

Item 44007

Instruction Manual

Revised - 04/20/2018

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: service@omcan.com

www.omcan.com

Table of Contents

Model MS-IT-0319-M

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Parts Breakdown

---------------------------------------------------------------------------------------------------------- 6

------------------------------------------------------------------------------------------------------ 6 - 7

-------------------------------------------------------------------------------------------------- 7 - 9

----------------------------------------------------------------------------------------- 3 - 4

---------------------------------------------------------------------------------------- 4 - 5

----------------------------------------------------------------------------------------- 10 - 19

Page

---------------------------------------------------------------------------------------- 5

Notes

Warranty Registration

-------------------------------------------------------------------------------------------------------- 20 - 22

----------------------------------------------------------------------------------------- 23

2

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

3

General Information

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

Safety and Warranty

MECHANICAL SAFETY DEVICES

The slicer is manufactured according to the EEC 2006/42 Machinery Directive. The mechanical safety devices are the following:

• The 360° unmovable blade guard ring protects the blade.

• A specic device allows to expose only the part of the blade used for cutting.

4

Safety and Warranty

IMPORTANT

The front support feet can be unscrewed and replaced as required according to the dimensions of the working surface.

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see www.omcan.com/warranty.html for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specications

Model MS-IT-0319-M Blade Size 12.5” / 319mm Cutting Size 8” x 8.7” / 203 x 220mm Cut Thickness Range 0.01” - 0.16” / 0.3 - 4mm

Weight 110 lbs. / 50 kgs. Dimensions 32.7” x 23” x 22” / 831 x 584 x 559mm Item Number 44007

5

Installation

The slicer must be placed horizontally on a stable, robust and non-slip base adequate to support its weight.

The suggested height of the working surface is about 800mm. Check out that the product tray motion has no hindrance and that the product can be easily loaded. It is possible to move the front support feet according to the depth of the working surface.

WARNING: To prevent the risk of crushing, position the machine so as to leave a clear space between

the moving parts and the permanent structure.

PRELIMINARY CLEANING

The machine has to be cleaned from the protection oil. Please follow the instructions detailed in Maintenance.

WARNING

The working surface must always be cleaned.

Operation

SLICER FUNCTIONING AND USE

This slicer is suitable only for cutting ham and prosciutto

WARNING

The following products cannot be sliced:

• Inedible products.

• Foodstuff with bones.

• Frozen products.

1. Check out that the blade is protected by the blade guard

2. By manually moving the ywheel, bring the foodholding plate towards the operator side.

WARNING: Turn the ywheel only in clockwise direction.

3. Distance the food-holding plate using the fast plate shifting lever.

4. Place the product on the food-holding plate, press down on the pusher vertical sliding handle and lock it with the self-clamping pusher.

Note: To avoid slicing anomalies (irregular thickness, broken slices, etc.) it is suggested not to let an excessive quantity of the product jut out from the self-clamping pusher.

Note: When it is necessary to cut a substantial amount of the product, it is suggested to repeat

several times the product re-positioning and re-locking operation by using the self-clamping

pusher.

5. Arrange the thickness desired slice thickness control is working on cutting.

Note: Turning the slice thickness control in clockwise direction increases the slice thickness, whereas turning it in counterclockwise direction reduces it. The knob is equipped with a graduate scale from 1 to 11 (from 0 to 2 mm).

6

Operation

6. Bring the product in the cutting position by using the fast plate shifting lever or the slow plate shifting knob.

WARNING: Leave a 0,5 to 1,0 cm space between product and blade.

7. Turn in counterclockwise direction the blade protection block. The blade guard will move away from the blade, exposing just the part used for cutting.

DANGER: The part of the blade used for cutting is not protected.

8. With your right hand rotate the ywheel in clockwise direction.

With such an action you will start the slicing operation.

To unload the product, do the reverse operations.

WARNING

Once you nished the cutting operation, do not forget to put back the blade protection by following the

described instructions in reverse.

Maintenance

BLADE SHARPENING

If the quality of the cut is not satisfying, the blade must be sharpened. The time interval between the

sharpening operations depends on the use of the slicer and on the kind of products to be cut. This operation

must be accomplished by qualied personnel. The blade must be replaced when its diameter is 10mm shorter

than the original one.

WARNING

The replacement of the blade is a dangerous operation. If the sharpening quality is not satisfying, replace both

of the grinding stones. Please contact Omcan customer service.

WARNING

Check that the blade guard covers the part of the blade used for cutting.

SHARPENING OPERATION

For a correct blade sharpening please proceed following the instructions hereafter:

1. Clean the blade, especially from fat leftovers.

2. Distance the food-holding plate from the blade.

3. Lift up the sharpener and rotate it 180°.

WARNING: Risk of injury - Once you have removed the sharpening device, a section of the blade

remains uncovered.

4. Replace carefully the sharpener, the grinding stones will position themselves on either side of the blade.

5. With your right hand rotate the ywheel clockwise.

6. Sharpening: Press and hold the “A” button to bring the grinding stones in contact with the blade. Perform

7

Maintenance

20/30 blade rotations with the ywheel. Then release the “A” button and stop the rotation of the blade.

7. Honing: Press and hold the “B” button and bring it in contact with the blade. Perform 1/2 blade rotations with the ywheel. Then release the “B” button and stop the blade rotation.

8. With your right hand rotate the ywheel clockwise.

9. Lift and rotate by 180° degrees the sharpener and reposition it in its initial position.

GRINDING STONES CLEANING

To obtain an excellent sharpening the grinding stones must always be clean. Remove dirt and grease with alcohol and the supplied brush.

MAINTENANCE

SPARE PARTS

Please request only original spare parts.

CLEANING

After long periods of inactivity, always perform the cleaning operations before using the machine again. Clean all the accessible parts by using a cloth damped with water.

WARNING

Please avoid water jets.

DANGER Please be careful during the cleaning operations: danger of injury.

WARNING

Check that the front blade protection covers the part of the blade used for cutting.

COMPONENTS REMOVAL

FOOD-HOLDING PLATE

• Turn the food-holding plate locking lever counterclockwise

• Pull up and remove the food holding plate.

SLICE-DEFLECTOR

• Loosen the screw and remove the slice deector.

SLICER RECEIVING TRAY

• Loosen the two handles and pull out the tray

8

Maintenance

BLADE CLEANING

DANGER

During the blade cleaning operations, carefully avoid accidental contacts with the blade.

• Clean the blade front side with a wet cloth and move it slowly outwards from the centre, as indicated by the arrow. Dry with another cloth, then clean the back side of the blade in the same way.

BLADE PROTECTION CLEANING

• Clean the blade guard ring front side with a wet cloth.

• Turn in counterclockwise direction the blade protection block.

DANGER: The part of the blade used for cutting is now uncovered.

• Clean the blade guard ring back side with a wet cloth.

• Once you nish the cleaning operation, turn the blade protection block clockwise, the blade guard will cover

the blade.

IMPORTANT: All the disassembled parts have to be cleaned individually with water and dishes detergent (do not use strong detergents), using a brush or a cloth. Then rinse them in warm water and

dry them.

LUBRICATION

LUBRICATION OF THE CARRIAGE GUIDE BAR

This operation must be performed after cleaning the machine or whenever there are sliding problems. We

suggest to use SHELL ONDINA 15 or ESSO MARCOL 82 oils.

• By activating the ywheel, move the carriage with the food-holding plate towards the operator.

• Squeeze the lubricating oil into the specic carriage guide bar lubricator.

• By activating the ywheel, let the carriage run back and forth several times.

REFERENCE

Item Number Model Number Description Manufacturer Model Number

44007 MS-IT-0319-M

Volano Flywheel Slicer Heritage - Manual

Slicer 319mm Diameter of Blade

HRT

9

Parts Breakdown

Model MS-IT-0319-M 44007

10

Model MS-IT-0319-M 44007

Parts Breakdown

11

Parts Breakdown

Model MS-IT-0319-M 44007

12

Model MS-IT-0319-M 44007

Parts Breakdown

13

Parts Breakdown

Model MS-IT-0319-M 44007

14

Model MS-IT-0319-M 44007

Parts Breakdown

15

Parts Breakdown

Model MS-IT-0319-M 44007

16

Parts Breakdown

Model MS-IT-0319-M 44007

Item No. Description Position Item No. Description Position Item No. Description Position

65116 Sharpener Assembled Cream for HRT A1151C 65134 Bush Ingr. V.S.F. for HRT B6375 36646 Nut U5588 M6 Stainless Steel for HRT D0163X

65117 Sharpener Assembled Black for HRT A1151N 65135 Arm Pressamerce Ass. for HRT B7984 36648 Nut U5588 M8 for HRT D0165X

65118 Sharpener Assembled Red for HRT A1151R 65136 Arm Pressam.Cromato Ass. for HRT B7984CR 64366 Nut M14x1 for HRT D0188

65119 Sharpener Assembled Custom for HRT A1151X 65137 Aluminum Hood Cream for HRT C1640C 36652 Nut M25x1.5 for HRT D0198

65120 Tree Flyer for HRT A3176 65138 Aluminum Hood Black for HRT C1640N 65160 Flywheel Spacer for HRT D5312

65121 Shaft for Wheel IN. (Z.36) for HRT A3177 65139 Aluminum Hood Red for HRT C1640R 65161 Spacer Shaft Corona for HRT D5313

65122 Shaft for Paral.Est.Mob Sledge for HRT A3178 65140 Aluminum Hood Custom for HRT C1640X 65162 Spacer Bar Øi7x18x10 for HRT D5314

65123 Blade Door Shaft for HRT A3180 65142 Flywheel Cart for HRT C1896 65163 Conical Spacer Øi7x18x22x10 for HRT D5315

65124 Compensator Ring 42x12 for HRT A5016 65143 Trolley Ass. for HRT C1945 65164 Spacer Bar2 BCT for HRT D5316

17279 Ring EL.Benzing 5 for HRT A5403 65144 Cart Ass. for HRT C1952 65165 Spacer for HRT D5317

16902 Ring EL.Benzing 8 for HRT A5406 65656 Cart Part Crome Assy. for HRT C1952CR 65167 Distance Lever AZ.Paral.Est. for HRT D576101

64355 Ring EL.Seeger Ext.12 for HRT A5444 65146

36541 Ring EL.Seeger INT.35 for HRT A5470 64360

19174 Ring for HRT A5475 65147 Flywheel Hinge Imp. for HRT C3668 64367 Wheel Eccentric 104 for HRT E1430

64356 Oil Seal OR 3043 for HRT A5849 36599 Rivet 3.85 for HRT C4621 65169 Feltro Cart for HRT F1616

17287 O-Ring 123 17.86x2.62 for HRT A5852 36601 Rivet 1.9x5 for HRT C4640 65170 Flat Floor for HRT F6084

65125 Flange Ring for HRT A5960 36623 Foot Cover for HRT C6682 65171

65126 Bar 12x20 Scorr.Carr for HRT B1067 65612 Sharpener Body for HRT C680764 65174 Ring Adjusting Device for HRT G5117

65127 Cart Bar for HRT B1746 65150 Trolley Bar Cover for HRT C7184 64368 Handle Bar Verticale L250 for HRT I1938

65128 Cart Bar Transport for HRT B1747 65151 Cover Inf. Shoulder for HRT C7185 65657 Grip. Chrome Vertical Bar 105 for HRT I1938CR

65129 Round Bar Ø19x310 Arm for HRT B1749 65152 Ant. Cover Shoulder S5227 for HRT C7186 17357 Deector Screw for HRT I1942

65130 Round Bar Ø19x320 Arm for HRT B1753 65153 Supp. Cover for HRT C7188 65176 Handle 6 Lobe D.30 Hole M6 for HRT I1963

65131 Rod Vernic for HRT B4010 65154 Rack Pressamerce for HRT C7255 36719 Cover Handle for HRT I2102

19618 Bushing 8x10x8 for HRT B6009 65155 Rack Advance. for HRT C7258 65178 Handle Regul.Avanz Handle for HRT I2138

19619 Bushing 8x10x12 for HRT B6020 36629 Bearing 2Z-6003 17x35x10 for HRT C8006 65179

16904 Bushing Sharpener for HRT B6048 19538 Bearing 20x42x12 for HRT C8008 65180

17303 Bushing DU 12x14x15 for HRT B6052 64362 Bearing 2Z-626 6x19x6 for HRT C8012 65181

16905 Bushing DU 16x18x15 for HRT B6053 17335 Bearing.2RS-6203 17x40x12 for HRT C8022 65182 Flying Handle for HRT I2147

17304 Bushing for HRT B6056 16926 Bearing 2RS-6000 (10x26x8) for HRT C8067 65183 Imp. for Leva Mov. V.S.F. for HRT I2161

16906 Bush Sharpening for HRT B6075 65157 Ball Holder 51103 17x30x9 for HRT C8114 65184 Imp. Chromed Movement Lever for HRT I2161CR

16907 Bush. Sharpening for HRT B6076 36636 Nut U5589 M6 Stainless Steel for HRT D0133X 65185 Hand Assembly for HRT I2177

17307 Bushing Sharp. for HRT B6083 64363 Nut DIN 917 M10 Inox for HRT D013615 65186 Handle Ass. for HRT I2292

64358 Bushing DU 12x14x10 for HRT B6217 64364 Nut U5589 M14 Inox for HRT D014015 65187 Gripping Assembly for HRT I2292CR

36568 DU Bushing 6x8x6 for HRT B6224 65159 Normal Nut U5588 M12 for HRT D0142 65188 Gear Advancement for HRT I2449

64359 Bushing DU 14x16x20 for HRT B6238 77555

65882

65132 Bushing SI.17x25x32x4x35 for HRT B6372 77613 Normal Nut U5588 M4 for HRT D0161 65191 Roller Engraver 3/8x7/32 z.36 for HRT I2477

65133 Bushing for Pivot Aff. for HRT B6373 19644 Nut M6 for HRT D0163 65192 Input Screw s.F.Avat.Avat.On for HRT I2480

Bushing SI.12x16x15 Sharpener AV3 for HRT

B6242 36644 U5588 M5 Stainless Steel Nut for HRT D016015 65190 Gear Z32 DP80 M2.5 for HRT I2475

Roller Chain 3/8x7/32" L.81p Closed for HRT

Right Hinge Stainless Steel Groupe of Int90E for HRT

Domed Nut DIN 917 M8 Stainless Steel for HRT

C3003 65166 Distance Barrel Carr. for HRT D5828

C3665 19554 Bearing Cam A310 for HRT E1401

Flange Chrome Plate B114 / TRIB for HRT

Chromed Grip Reg.Piatto Handle for HRT

Grip Holder Fix.Piatto Portamerce for HRT

Impug. Chromed Fix.Piatto B114 / TRB for HRT

D014515 65189 Gear Z16 DP40 M2.5 for HRT I2474

F6084CR

I2138CR

I2145

I2145CR

17

Parts Breakdown

Model MS-IT-0319-M 44007

Item No. Description Position Item No. Description Position Item No. Description Position

65193 Blade mm 319/19/2 for HRT L0633 65214 Pin for Imp. for HRT P3750 36889 Washer 10.5x16x1 for HRT R6816

65195 Drive Lever for HRT L2444 65215 Axle Lift Station Pin for HRT P3771 65232

65196 Lever Block Gear for HRT L2445 65216 Ax.Mola Sbavatrice Pin for HRT P3788 65233 Special Washer 8x14x1 Inox for HRT R6862

65197 Lever for Rod for HRT L2446 64372 Support Motor Flat for HRT P4623 36891

65198 External Operating Lever for HRT L2447 65217 Bearing Sliding Plate for HRT P4629 16972 Washer 5.5x19x2.5 for HRT R6884

65199 Lever Mov. Screw S.F. for HRT L2448 17438 Foot for HRT P5030 36893

65200

14787 Grinding Stone C for HRT M6602 65219 Plate Supp. Flat Bearing for HRT P5149 65234 Blade Fixing Washer for HRT R6969

36739 Honing-Finishing Stone for HRT M6621 65220 Plate Supp. Sharpener for HRT P5150 65235 Washer Adjustable Threading for HRT R6970

36741 Spring 2.9x4x12 Stainless Steel for HRT M7001 65221 Plate Flying Comb 319 for HRT P5153 65236 Washer Dist.Barra Cart for HRT R6971

17379

17380

19249 Spring 15.1x1.3x18 for HRT M7035 65224 Stainless Steel Plate Posamerce for HRT P5370 65239 Rond. Pos. for HRT R6975

19781 Spring for HRT M7049 65225

19782 Spring 19.5x1.5x16.7 for HRT M7050 65226 Transversal Plate Ass. for HRT P5739 19677 Wheel Tray for HRT R8512

17381 Spring 22 5x1 8x18 for HRT M7052 64373 Pusher Ass.L250/275 2 Colonne for HRT P6911 19680 Ball 3 17 for HRT S3005

65204 Handle Spring Trolley for HRT M7090 65228 Presser B114 / TRB Chrome for HRT P6911CR 19681 Sphere 4 for HRT S3010

64122 Spring Support for HRT M7099 65229 Prisoner M12x90 Galvanized for HRT P7448 17465 Ball 4.76 for HRT S3015

65202 Spring 10x50 SP.0.5 for Lever for HRT M7186 65230 Protection Parpollice for HRT P7858 65243 Slide Move Paral.Externo for HRT S3831

65203

17386 Rubber Shock Absorber for HRT P1001 19657 Washer 4 for HRT R6003 65245

36760 Pin Tray Shock-Absorber for HRT P1025 19661 Washer 8 for HRT R6030 65658 Heritage Flywheel Shoulder for HRT S5227

19797 Nylon Shock 8.5x8 for HRT P1042 17454 Washer for HRT R6204 64379

36762 Rubber Plug for HRT P1053 64374 Rondella Tazza 16.3x31.5x0.8 for HRT R6225 36921 Stainless Steel 4x7 Pin M.C for HRT S7527

65206 Parafet for HRT P1190 64375

65207 Paragrasso for HRT P1376 65231 Wavy Washer 12.5x25x0.3 for HRT R6290 64381 Spina 5x10 Inox Supp.Afla. for HRT S7646

65208 External Paralam for HRT P1721 64376

16959 Pin Grinding for HRT P3225 36882 Washer U6592 5 Stainless Steel for HRT R6508X 64383 Stainless Steel Pin 6x10 Zig. for HRT S7678

17419 Pin Truing for HRT P322601 17457 Washer U6592 6 Stainless Steel for HRT R6512X 65247 Plug x.External Panel S9M-1 for HRT S7681

65209 Spindle Lever Flat Advance for HRT P3237 36884 Washer U6592 8 Stainless Steel for HRT R6520X 65248 Central Plug Sharpening for HRT S7686

17427 Assy Grinding Stone Pin for HRT P3381 36885

65211 Transmission Pin Couple Con for HRT P3743 65241

65212 Sharpening Pin for HRT P3744 64377 Washer U6592 12 for HRT R6540 65660 Supp. Plate Port. Black for HRT S9516N

65213 Spindle Scroll.Select for HRT P3747 64378

Movim Lever Screw S.F. B114 / TRIB for HRT

Spring 11.9x0.7x27 Stainless Steel for HRT

Spring 13.4x1.3x30 Stainless Steel for HRT

Conical Spring ØI39xØI26x42 Wire Ø2.5 for HRT

L2448CR 65218 Plate Posit. Sharpener Body for HRT P5147 36897 Special Washer 5.5x22x1.5 for HRT R6932

M7029 65222 Fix Plate Felt Carr. for HRT P5162 65237 Washer Ecc. Ring for HRT R6973

M7030 65223 Plate Assembly Strap for HRT P5196 65238 Washer Imp. for HRT R6974

M7187 24030

Stainless Steel Plate Posamerce.Ass. for HRT

HLC Sharpener Operating Handle for HRT

Rondella Ondulata 10.5x15.8x0.15 for HRT

Washer U6593 5 (5,5x15x1,2) Inox for HRT

Washer U6592 10 Stainless Steel for HRT

Flat Washer U6953 10x30x2.5 Inox for HRT

Stainless Steel Washer U6593

6.6x18x1.6 for HRT

P5732 65240 Washer Ø12x21.8x2 Brass for HRT R6976

P8625 65244 Sled Ass. for HRT S3898

R6282 64380 Spina Mecc.Elast. U6873 6x40 for HRT S7548

R650715 64382 Spina Centraggio Plate S9M-1 for HRT S7672

R6530X 65249 Conical Plug Ø6x70 for HRT S7687

R653215 65659 Supp. Plate Port. Cream for HRT S9516C

R680415 65661 Supp. Plate Port. Red for HRT S9516R

Washer Spec.Rasam.Ram24 17x24x0.2 for HRT

Washer 10.5x26x0.5 Stainless Steel for HRT

Stainless Steel Special Washer 8.5x24x2 for HRT

Spherical Joint Rad.GE10E 10x19x9 for HRT

Spina Pivot Blocco Lame MT55 Inox for HRT

R6835

R6871

R6897X

S4504

S7417

18

Parts Breakdown

Model MS-IT-0319-M 44007

Item No. Description Position Item No. Description Position Item No. Description Position

65662 Supp. Plate Port. Custom for HRT S9516X 64390 Vite STEI U5929 M6x25 Inox for HRT V607115 64400

65663 Arm Support 2 Columns for HRT S9517 19694 Screw M8x10 for HRT V6075 65277

65255 Flat Support Pos. for HRT S9521 64391 Screw M10x25 U5923 for HRT V6084 65278 Screw TSP U6109 M8x16 Inox for HRT V707815

65256 Supp. Crem. Adv. for HRT S9526 65263 Screw STEI U5923 M8x10 for HRT V6089 19713 Screw Sharpener for HRT V7710

19877 Rubber Cap for HRT T1001 37034

65257 Heyco DP-625 Plug Diam.16 for HRT T1034 64392 Screw TCEI U5931 M5x12 Inox for HRT V624315 19715 Screw Sharpener for HRT V7910

65258

64384

64385 Targhetta Royal Machines Ø58 for HRT T1786 64394 Screw TCEI U5931 M8x35 for HRT V6255 64401 Screw M6x10 for HRT V7944

65259 Flat Flywheel Plate Ø126.5 for HRT T1787 64395 Vite TBTC U6954 4,8x19 for HRT V6302 37095 Screw for Rod 6x13 for HRT V7993A

65260 Rounded Flywheel Plate Ø57.5 for HRT T1788 64396 Screw TBTC Aut.U6954 2.2x9.5 for HRT V6312 65664 Screw M8x35 Inox for HRT V8019

65261 Plate Vol.Sagomata 2Col for HRT T1792 37055

64386 Screw STTC U6113 M5x12 for HRT V6002 65264 Screw TCEI U5931 M12x100 for HRT V6348 37104 Threaded Stud for HRT V8042

37016 Screw STTC U6113 M4x25 for HRT V6008 65265 Screw TCEI U5931 M4x10 for HRT V6355 37106

26127 Stud C Model for HRT V602115 37060

64387

37021 Screw for HRT V6030 65276 Screw for Ends S9M-1 for HRT V642216 65267 Flywheel Cream for HRT V8510C

64388 Screw STEI U5923 M6x16 for HRT V6031 37070

64389 Screw STEI U5929 M4x5 for HRT V6062 37073

65262 Screw STEI U5929 M5x14 for HRT V6063 64397

65275 Screw STEI U5929 M5x14 Inox for HRT V606315 17497

37023 Screw STEI U5929 M5x5 for HRT V6065 64398

19691 Grub Screw M6x6 for HRT V6066 64399 Screw TSP U6109 M6x20 Inox for HRT V701715 65273 Flower Flywheel Red for HRT V8512R

19692 Screw M6x8 for HRT V6067 37079

19693 Screw M6x5 for HRT V6068 74418 Vite TSP U6109 M4x8 Inox for HRT V703415

Plate Autoad. 0-11 Advance. Plate for HRT

Targhetta Royal Machines Mezzaluna for HRT

Stainless Steel Screw M8x30 U5923 for HRT

T1783 77598

T1785 64393 Vite TCEI U5931 M6x30 Inox for HRT V625015 19720 Screw M6 for HRT V7934

V602215 37062

Stainless Steel Screw M8x4 U5931 for HRT

Stainless Steel Screw TCEI U5931 M6x20 for HRT

Stainless Steel Screw M5x8 U5931 for HRT

Stainless Steel Screw TE U5737 M5x12 for HRT

Screw TE U5739 M10x25 Stainless Steel for HRT

Screw TE U5739 M6x20 Stainless Steel for HRT

Screw TE U5739 M8x25 Stainless Steel for HRT

Stainless Steel Screw TSP U6109 M4x12 for HRT

Screw TSP U6109 M5x15 Stainless Steel for HRT

Screw TSP DIN 963 M6x16 Stainless for HRT

Screw TSP U6190 M6x30 Stainless Steel for HRT

V620615 17503 Screw M5x13 for HRT V7908

V6245X 19717 Screw M6x50 for HRT V7917

V634015 37103 Screw M5x15 for HRT V8038

V6403X 37112 Stainless Steel Screw M8x4 for HRT V8085

V6413X 37114 Stainless Steel Screw M6x25 for HRT V8130

V6449X 65268 Flywheel Black for HRT V8510N

V6461X 65269 Flywheel Red for HRT V8510R

V700815 65270 Flywheel Custom for HRT V8510X

V7014X 65271 Flower Flywheel Cream for HRT V8512C

V7016X 65272 Flower Flywheel Black for HRT V8512N

V7018X 65274 Flower Flywheel Custom for HRT V8512X

Stainless Steel Screw TSPEI U5933 M6x15 for HRT

Screw TSPEI U5933 M10x25 Inox for HRT

Stainless Steel Switch Screw M5x10 for HRT

V704715

V705915

V8048

19

Notes

________________________________________________________________________________________

20

Notes

________________________________________________________________________________________

21

Notes

________________________________________________________________________________________

22

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

www.omcan.com/warrantyregistration.html

For mailing in Canada

Pour postale au Canada

Por correo en Canadá

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

For mailing in the US

Pour diffusion aux États-Unis

Por correo en los EE.UU.

OMCAN

Niagara Falls, New York

USA, 14305

or email to: service@omcan.com



Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

23

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 3,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 3,500 productos con origen a nivel mundial.

Omcan 44007 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual